Audi 100 Catalytic Converter Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(2,427)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(2,427)

Catalytic Converter Replacement Service

How much does a Catalytic Converter Replacement cost?

On average, the cost for a Audi 100 Catalytic Converter Replacement is $1686 with $1581 for parts and $104 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1989 Audi 100L5-2.3LService typeCatalytic Converter ReplacementEstimate$3288.99Shop/Dealer Price$4098.87 - $6485.18
Show example Audi 100 Catalytic Converter Replacement prices

What is the Catalytic Converter all about?

The catalytic converter is an emissions related component that is mounted in the exhaust pipe. Its purpose is to superheat unburned particles in the exhaust gases that are expelled from the engine. As the engine runs, the catalytic converter warms up to an operating temperature of 500-1200 °F. At this temperature the particles in the ‘dirty’ exhaust are burned and converted into water vapor and carbon dioxide. The catalyst inside is nearly always comprised of precious metals such as platinum, rhodium, or palladium. When the catalyst isn’t able to burn off the unburned hydrocarbons in the exhaust, an unpleasant odor can occur, a rough run or misfire may be felt, or the Check Engine light may illuminate.

Keep in mind:

  • Most cars will require the aftermarket Catalytic Converter to be welded to the exhaust pipes. Mobile mechanics can only do this service if you have a direct fit catalytic converter bought from a dealer.
  • When replacing the catalytic converter, it may be necessary to replace oxygen sensors as well.
  • Catalytic converter symptoms are often similar to other more straightforward issues. Get the Check Engine light diagnosed anytime it illuminates.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The defective catalytic converter is removed
  • The new catalytic converter is installed and the vehicle is started to check for any leaks
  • The vehicle is lowered off the jack stands
  • The vehicle is road tested for proper operation

Our recommendation:

If you are consistently taking short trips with your vehicle, the catalytic converter may not be getting hot enough to completely burn away the hydrocarbons. To prevent the catalytic converter from getting clogged, take your vehicle for the occasional drive on the highway for 15 minutes. This allows the exhaust to sufficiently heat up and burn off any deposits in the catalytic converter.

What common symptoms indicate you may need to replace the Catalytic Converter?

  • Check engine light is on or flashing
  • Car has little or no power
  • Smell of rotten eggs inside the car or out of the exhaust
  • Poor fuel economy
  • Backfiring and rough running

How important is this service?

If the catalytic converter isn’t operating efficiently, the check engine light will come on and your engine can begin to lose performance. If the catalytic converter becomes plugged, the engine light will begin to flash and your engine may stall or no longer start. In extreme cases where the converter is plugged, the excess back pressure created can actually cause internal engine damage. If you are experiencing symptoms related to catalytic converter failure, get it checked soon.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,427)

Rating Summary
2,252
86
19
12
58
2,252
86
19
12
58

Bereketeab

7 years of experience
110 reviews
Bereketeab
7 years of experience
Audi 100 V6-2.8L - Spark Plugs - Sacramento, California
Goes above and beyond, helped save my coil pack when a plug wire was stuck in it. He didn't give up and got it out and finished the job.

Frank

8 years of experience
130 reviews
Frank
8 years of experience
Audi 100 V6-2.8L - Pre-purchase Car Inspection - Chicago, Illinois
Frank was great - kept me informed and performed a solid inspection of a vintage car that I was purchasing 800 miles from home.

Scott

36 years of experience
909 reviews
Scott
36 years of experience
Audi Q5 L4-2.0L Turbo - Catalytic Converter - Chandler, Arizona
Scott is very professional amd courteous

Kyle

12 years of experience
137 reviews
Kyle
12 years of experience
Audi A5 Quattro L4-2.0L Turbo - Oxygen Sensor Replacement (Front/Upper/Upstream) - Willingboro, New Jersey
Kyle was courteous,professional and knowledgeable. I will request him again

Excellent Rating

(2,427)

Rating Summary
2,252
86
19
12
58
2,252
86
19
12
58
Number of Audi services completed
26697+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Porsche Cayenne
If If you’re looking for an SUV that offers plenty of cargo space, the ability to tow more than 7,000 pounds and that has luxury and fun to drive appeal, the 2012 Porsche Cayenne is your answer. Key Features All...
P0108 OBD-II Trouble Code: Manifold Air Pressure (MAP) Barometric Pressure Sensor Circuit High Voltage Input Problem
P0108 Trouble code definition Manifold Air Pressure (MAP) Barometric Pressure Sensor Circuit High Voltage Input Problem What the P0108 code means P0108 is...
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Illinois
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in Illinois through the Universal Technical Institute.

How do you check the MyKey® status on my car?

Your car has the ability to track a lot of information about the MyKeys® that are programmed to work with it. Here’s what you need to know about the various system status messages. MyKey® Miles: This tells you the total...

How do I properly install a transmission pan back on?

When installing the pan, the mating surfaces of the transmission and the pan should be clean, dry, and free of debris. To assure a good seal, I will usually use some brake cleaner, acetone, or any other type of solvent...

My clutch engages but my truck is still hard to get into gear 2003 Mazda B2300

Hi. It sounds like you are having a problem with the clutch hydraulic system. If the clutch appears to be engaging and not slipping then the hydraulic system is not fully disengaging the clutch which makes it hard to change...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com