Audi 100 Brake fluid is leaking Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(2,399)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(2,399)

Brake fluid is leaking Inspection Service

How much does a Brake fluid is leaking Inspection cost?

On average, the cost for a Audi 100 Brake fluid is leaking Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Audi 100V6-2.8LService typeBrake fluid is leaking InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
1994 Audi 100V6-2.8LService typeBrake fluid is leaking InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1993 Audi 100V6-2.8LService typeBrake fluid is leaking InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1991 Audi 100L5-2.3LService typeBrake fluid is leaking InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
1990 Audi 100L5-2.3LService typeBrake fluid is leaking InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
1989 Audi 100L5-2.3LService typeBrake fluid is leaking InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
Show example Audi 100 Brake fluid is leaking Inspection prices

Your brakes are the most important safety system on your vehicle. It’s all too easy to take them for granted, but if they were to fail even once, the results could be catastrophic. Most automotive brake systems are hydraulic, which means that pressurized fluid is sent through the lines from the master cylinder to the calipers and drums in order to activate the pads/shoes and slow down the car. If your brake fluid is leaking, it’s a sign that there’s something seriously wrong.

How this system works:

Your brake system is both simple and complex. There are a number of parts required to make it work properly, but the underlying concept is not that difficult to understand. Your master cylinder is the heart of the system – it is responsible for both boosting brake performance (via the brake booster onto which the master cylinder mounts), and for holding and sending brake fluid through the system.

In a nutshell, your brake system works like this: You press the brake pedal, which activates the master cylinder. It pushes fluid into the lines and down to the calipers. The fluid pressure forces the calipers to close, squeezing the rotor between the brake pads. This creates drag and friction, slowing down the car.

However, if fluid is leaking from somewhere in the system, it could mean that you’ll have insufficient fluid for proper brake operation.

Common reasons for this to happen:

  • Worn Brake Pads: If you suspect fluid is leaking because the level in the reservoir is low, it might be nothing more than worn pads. As the pads wear, more fluid is held in the system (because the caliper piston remains farther out due to the reduced pad material).

  • Damaged Master Cylinder Reservoir: Over time, the plastic reservoir attached to your master cylinder becomes brittle due to heat exposure. It can eventually crack, allowing brake fluid to seep out and down the back of the engine.

  • Damaged Bleeder Valve: Each caliper has a bleeder. These valves allow mechanics to bleed air out of the lines, but they can become damaged (or can be knocked loose or even left loose after inexpert service).

  • Damaged Brake Line: Your car has both rubber and steel brake lines that carry fluid to and from the master cylinder. Both types are prone to wear and can be punctured. If this occurs, fluid will steadily leak out of the line.

  • Failed Wheel Cylinder: On drum brakes, one of the most likely culprits is the wheel seal. These will fail over time and through normal wear and tear, eventually weeping brake fluid.

  • Failed Piston Seal: The piston in your caliper is activated by fluid, and it’s a moving part, which means a seal is necessary to keep the fluid inside while allowing the piston to move. If the seal is damaged (cracked or punctured), it will leak brake fluid.

What to expect:

A professional mobile mechanic will come to your home or office to inspect your brake system, including the master cylinder, brake lines, drums, calipers and other components. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect all aspects of your vehicle’s brake system, including possibly checking trouble codes in the computer if the ABS light is on (set off by the brake fluid level sensor). The mechanic will trace the leak to its origin, and then advise you on the next step required to repair the problem.

How important is this service?

Without an operational brake system, your car cannot be legally or safely driven. Leaking fluid is cause for concern – if the fluid level drops below a certain level, the brakes will not work. It’s essential to have your brake system inspected during normal maintenance, and to pay close attention to the fluid level in the reservoir. Any leaks should be immediately inspected and repaired. One of our professional mechanics can inspect, diagnose and repair your brake fluid leak.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,399)

Rating Summary
2,226
85
19
12
57
2,226
85
19
12
57

Bereketeab

7 years of experience
110 reviews
Bereketeab
7 years of experience
Audi 100 V6-2.8L - Spark Plugs - Sacramento, California
Goes above and beyond, helped save my coil pack when a plug wire was stuck in it. He didn't give up and got it out and finished the job.

Frank

8 years of experience
130 reviews
Frank
8 years of experience
Audi 100 V6-2.8L - Pre-purchase Car Inspection - Chicago, Illinois
Frank was great - kept me informed and performed a solid inspection of a vintage car that I was purchasing 800 miles from home.

Mazyar

8 years of experience
474 reviews
Mazyar
8 years of experience
Audi A6 Quattro V6-3.2L - Brake fluid is leaking - Conyers, Georgia
Very professional and quickly was able to inspect my vehicle. He showed me the parts that needed replacement/repair explained where the repairs were needed. Going to schedule and have him complete the repairs. EH

Mark

11 years of experience
349 reviews
Mark
11 years of experience
Audi S4 V6-2.7L Turbo - Car is not starting - Mountain View, California
Mark is an awesome mechanic, he was polite, extremely knowledgeable, and very patient with me and total lack of understanding with anything related to cars!!

Excellent Rating

(2,399)

Rating Summary
2,226
85
19
12
57
2,226
85
19
12
57
Number of Audi services completed
26389+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

How to Renew Your Car Registration in Virginia
Like Like all other states, Virginia requires vehicle owner to register their vehicles, and then to renew their registration each year. Registration is important for a number of different things, including ensuring that you’re current on your automotive taxes (your...
Top 10 Cities for Sports Car Owners
You can get more bang for your buck driving your luxury sports car in these cities. Oklahoma City has affordable gas and an open track to drive on.
P0987 OBD-II Trouble Code: Transmission Fluid Pressure Sensor/Switch E Circuit
P0987 means there is an issue with the sensor or switch in the transmission fluid pressure E circuit, possibly due to bad fluid level or components.

I think it's the radiator

It would not be advisable to drive the vehicle or further engine damage may occur. If you drive the vehicle and overheat the engine even once you could cause the head gaskets to leak or seize the motor. The cost...

Car will not shift into fourth gear - 1991 Mercedes-Benz 300SE

Hello. I would check the condition of the transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) first as well as the level. If the fluid is old or low then this will occur. If the fluid smells burnt or has debris in it then the...

Hello, my name is\*\*\*\*\* drive a 2011 Toyota [Prius](/topics-prius/) with 120,000 miles. It has been 8000 miles since the last oil change — the factory recommended interval is 5000, but I found somewhere that Toyota was suggesting 10000 was ok, so I was trying it out given how frequently I have to do oil changes. In the last week, the car is running a bit rougher than usual. I noticed the master warning light blink on for a second and then go off when braking, and something about oil pressure briefly flashed. I checked the oil and it seemed a bit low and darker than expected, so I decided to change it. Before doing so, I got a check [engine](/topics-engine-toyota/) light with a P0302 Cylinder 2 Misfire detected code.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com