Audi 100 Quattro Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(2,427)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(2,427)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a Audi 100 Quattro Uneven tire wear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Audi 100 QuattroV6-2.8LService typeUneven tire wear InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
1992 Audi 100 QuattroV6-2.8LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1990 Audi 100 QuattroL5-2.3LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
1989 Audi 100 QuattroL5-2.3LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
1991 Audi 100 QuattroL5-2.3LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$112.55 - $125.72
1994 Audi 100 QuattroV6-2.8LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
Show example Audi 100 Quattro Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Audi mechanics

Real customer reviews from Audi owners like you.

Excellent Rating

(2,427)

Rating Summary
2,252
86
19
12
58
2,252
86
19
12
58

Greg

22 years of experience
378 reviews
Greg
22 years of experience
Audi A4 Quattro L4-2.0L Turbo - AC is not working - Gilbert, Arizona
Great

Christopher

20 years of experience
317 reviews
Christopher
20 years of experience
Audi A3 L4-2.0L Turbo - 105,000 Miles Maintenance Service - Valrico, Florida
He arrived on time; was very professional; and was easy to talk to concerning my car. Overall a very pleasant experience and I look forward to our next interaction.

John

19 years of experience
138 reviews
John
19 years of experience
Audi TT L4-2.0L Turbo - Oil Change - Austin, Texas
Awesome. Informative and approachable.

Tam

22 years of experience
251 reviews
Tam
22 years of experience
Audi A4 Quattro L4-2.0L Turbo - Ignition Coil - San Francisco, California
Tam did a good job fixing the problem at hand (a faulty ignition coil). He was thorough and explained the problem to me and fixed it wonderfully. That said, he discovered a bigger problem, an oil leak, and said he would get me a quote for fixing it by the evening of the appointment (Wednesday). It's now Friday and I never received it, so the follow through wasn't there.

Excellent Rating

(2,427)

Rating Summary
2,252
86
19
12
58
2,252
86
19
12
58
Number of Audi services completed
26697+
services done by our mechanics
TOTAL NUMBER OF EXPERT Audi MECHANICS
700+
experts on our platform

Recent articles & questions

Can I Fix My Car with a Home Code Reader/Scanner?
Most Most cars today (anything manufactured after 1996, actually) have an onboard computer that stores trouble codes when something goes wrong with a major component in the engine, transmission or emissions system. By connecting a code reader/scanner to the OBD...
What Gases Does the OBD Detect in the Exhaust?
Your Your engine runs on combustion – fire – which creates exhaust gases. A wide range of gases are produced during normal operation, and they must be controlled because many of them become pollutants when released into the atmosphere. It’s...
How to Replace a Pitman Arm Shaft Seal
The pitman arm attaches to the steering box via a shaft. To prevent leaks and driveability issues, the pitman arm shaft seal is used on this shaft.

How do I use the child-protection door lock?

The child-protection system is a safety precaution that keeps children from being able to open the rear doors of your vehicle from the inside. To activate the child-protection lock, open both rear doors. The child-protection locks are on the side...

Car displaying Gearbox Fault message

When a gearbox fault is present this means that an issue has occurred in the transmission. There are multiple shift solenoids in the transmission. If any one of these malfunction in anyway the light could be set. Mechanical issues can...

Heater core malfunction

When the vehicle begins to overheat after cooling system repairs were done, it is usually due to air stuck in the cooling system. Normally after cooling system repairs, the coolant system is bled of all air (https://www.yourmechanic.com/article/how-to-flush-your-cooling-system-by-rocco-lovetere), or "Burped". This...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com