Acura ZDX Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(2)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(2)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Acura ZDX Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Acura ZDXV6-3.7LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$132.49 - $145.62
2012 Acura ZDXV6-3.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2010 Acura ZDXV6-3.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.52 - $125.67
2011 Acura ZDXV6-3.7LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$112.48 - $125.60
Show example Acura ZDX Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Acura mechanics

Real customer reviews from Acura owners like you.

Excellent Rating

(2)

Rating Summary
2
0
0
0
0
2
0
0
0
0

Ben

41 years of experience
1421 reviews
Ben
41 years of experience
Acura ZDX V6-3.7L - Timing Belt - Cypress, Texas
Mr. Ben is extremely personable, patient and knowledgeable. I had a great experience. I was curious and he was very patient to explain every step, and also got the work done on time. I will definitely recommend him for any automotive needs.

Chris

18 years of experience
494 reviews
Chris
18 years of experience
Acura ZDX V6-3.7L - compressor discharge hose - Houston, Texas
Mr. Chris G. arrived on time and performed the work efficiently. Recommended...

Matthew

33 years of experience
1229 reviews
Matthew
33 years of experience
Acura ZDX V6-3.7L - Timing Belt - Toano, Virginia
Very much professional.. Explained the task at hand. Showed the old parts taken away. in the future will work with you guys real soon and would like Matt to return for the requested service. And I m glad I found you guys on line..

Mitchel

24 years of experience
239 reviews
Mitchel
24 years of experience
Acura MDX V6-3.5L - Windows - Miami, Florida
Very professional and extremely thorough with the vehicle. Will definitely book him again!

Excellent Rating

(2)

Rating Summary
2
0
0
0
0
2
0
0
0
0
Number of Acura Windows Inspection services completed
22+
services done by our mechanics
TOTAL NUMBER OF EXPERT Acura MECHANICS
1000+
experts on our platform

Recent articles & questions

Preparing Your Car for Long-Term Storage
There There are multiple reasons you may need to store your vehicle. Perhaps your convertible is used only in the summer, and will need to be put into long-term storage throughout the winter. Maybe a project car is being stored...
2011 Dodge Ram vs. 2011 Ford F-150: Which One Should I Buy?
Large trucks can be fun to drive, and even more fun to get dirty. Unfortunately, they may also cause you to get phone calls from friends who need to move into a new apartment. Fortunately, just having a truck may...
How to Buy a Good Quality Air Pump
Whether Whether you call it an air pump or a smog pump, it comes down to the same thing – a pump designed to force air into the engine to help improve emissions by re-burning spent vapor. Most air pumps...

Throttle. 2006 Mercedes Benz ML350

Hi there. This sounds like a throttle position sensor (https://www.yourmechanic.com/services/throttle-position-sensor-replacement) problem. The throttle position sensor relays the position of your foot on the pedal to the car's ECM, which then tells the fuel injection system how much more or less...

Idle air valve calibration/adjustment

Hi there. It is suggested to have a bidirectional scan tool but it is not required. Verify the idle speed is within 650-750 rpm. You want to be at 700 rpm ideally. Connect data link connector terminals TEN & GND...

I have a 2013 Chrysler 200 and i just got the radiator changed but the gage still risies very high, could that mean i need a therm

Hi there. When you have an overheating problem after replacing the radiator, it can be caused by several different issues ranging from an obstruction in the coolant lines or heater core, the coolant having air bubbles in the lines, cooling...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com