Acura RSX Water Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(184)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(184)

Water Pump Replacement Service

How much does a Water Pump Replacement cost?

On average, the cost for a Acura RSX Water Pump Replacement is $405 with $158 for parts and $247 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Acura RSXL4-2.0LService typeWater Pump ReplacementEstimate$619.21Shop/Dealer Price$744.78 - $1019.09
2005 Acura RSXL4-2.0LService typeWater Pump ReplacementEstimate$562.73Shop/Dealer Price$687.26 - $958.27
2006 Acura RSXL4-2.0LService typeWater Pump ReplacementEstimate$562.73Shop/Dealer Price$687.25 - $958.26
2004 Acura RSXL4-2.0LService typeWater Pump ReplacementEstimate$562.73Shop/Dealer Price$687.15 - $958.08
2002 Acura RSXL4-2.0LService typeWater Pump ReplacementEstimate$567.21Shop/Dealer Price$692.93 - $967.35
Show example Acura RSX Water Pump Replacement prices

What is a water pump and how does it work?

The water pump is a belt or chain-driven engine accessory bolted to the engine above the crankshaft pulley. The pump housing has an impeller that circulates engine coolant through the cooling system passageways in the engine block and cylinder head, on to the radiator, where the coolant temperature is reduced. . The lower temperature coolant then flows back to the water inlet on the engine and the water pump continues the cycle.

When to consider replacing the water pump:

  • Coolant leaks or overheating. The water pump impeller shaft is supported by a bearing. Eventually, the bearing or seal can wear and leak or damage the impeller. Many water pumps have weep holes near the pump bearing. If you see significant leakage from that weep hole, it is time to replace the pump.
  • Bearing roughness or noise. If the water pump shaft does not turn smoothly or the pump is noisy, the bearing is excessively worn. Pump replacement will be necessary.
  • Timing belt replacement. In engines where the water pump is driven by the timing belt, it is a good idea to replace the water pump at the same time the timing belt is replaced. The extensive work explains why it is always recommended to replace the water pump whenever the mechanic already has these components removed for regularly scheduled timing belt replacement.

How do mechanics replace the water pump?

  • The water pump is usually bolted to the front of the engine. The replacement procedure will vary depending on whether the pump is driven by the timing belt, the serpentine belt, or chain.
  • On a cold engine, the engine coolant is drained to a level below the water pump.
  • Components that require removing to access the water pump are removed, including the belt or chain that directly drive the pump.
  • The bolts holding the pump to the engine are removed and the pump is pulled out.
  • The gasket surface must be cleaned and the pump mounting surface inspected. A new gasket, rubber seal, or RTV sealant, as required, is installed and then the new pump. The bolts are torqued in sequence using a calibrated inch pound torque wrench.
  • For applications where the water pump is driven by the timing belt, the timing belt must be removed. Typically, this requires removal of the crankshaft pulley, timing belt covers, and timing belt tensioner. Once the new pump is installed, new coolant is added back while bleeding the cooling system of any air. The engine is then run and brought to normal operating temperature to check for leaks and ensure normal operating temperature.

Is it safe to drive with a water pump problem?

No. Should the water pump only leak a little bit, you can drive the car. However, a small leak could suddenly enlarge or the pump bearing might unexpectedly seize. Either circumstance would likely cause engine overheating. If a defective water pump causes the overheating, it is not safe to drive because of the damage to the engine.

When replacing the water pump keep in mind:

  • It is best to install a new cooling system thermostat when you install a new water pump, especially if the thermostat is old or original.
  • Completely flushing the cooling system is a good idea when you replace the water pump. Flushing can be done before or after pump replacement.
  • The rest of the cooling system should be inspected too — particularly rubber hoses, which have a limited lifetime.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Acura mechanics

Real customer reviews from Acura owners like you.

Excellent Rating

(184)

Rating Summary
173
3
3
2
3
173
3
3
2
3

Erik

35 years of experience
4 reviews
Erik
35 years of experience
Acura RSX L4-2.0L - Starter - Tallahassee, Florida
Good quick work

Ryan

12 years of experience
47 reviews
Ryan
12 years of experience
Acura RSX L4-2.0L - Oxygen Sensor Replacement (Front/Upper/Upstream) - San Diego, California

Richard

21 years of experience
237 reviews
Richard
21 years of experience
Acura RSX L4-2.0L - Window is not working - Bonita Springs, Florida
Great and fast service!

Nelson

26 years of experience
163 reviews
Nelson
26 years of experience
Acura RSX L4-2.0L - Strut Assembly Replacement (Front) - Sacramento, California
Great great mechanic I could not ask for more his a great guy who knows his stuff

Excellent Rating

(184)

Rating Summary
173
3
3
2
3
173
3
3
2
3
Number of Acura RSX services completed
2024+
services done by our mechanics
TOTAL NUMBER OF EXPERT Acura MECHANICS
900+
experts on our platform

Recent articles & questions

Insurance Requirements for Car Registration in Washington
All All drivers in the state of Washington are required to carry liability insurance, or “financial responsibility,” on their vehicles in order to legally operate a vehicle and maintain vehicle registration. This applies to all vehicles except: Motorcycles Motor-driven bicycles...
How to Use “Stow ‘n’ Go” Seats in a Dodge or Chrysler Minivan
Minivans Minivans offer customers maximum interior space for the size of the vehicle. On a platform just a bit larger than a full size car, you can fit a driver and six passengers - or a driver, three passengers, and...
P2768 OBD-II Problem Code: Input/Turbine Speed Sensor B Circuit Intermediate
P2768 means a varying, erratic, or irrational signal is sent from the turbine speed sensor due to a faulty sensor, solenoid, or shorted circuits.

Car won't start - 1998 Dodge Durango

The starting troubles you are having are likely related to your battery or your starter. You will want to start by jump starting the vehicle. If this works, the battery was drained. The battery then may just need a good...

Engine shakes intermittently after warmed up with car in "drive" at a stop. Single shakes at a time.

Hi there. There could be an issue with the fuel system or with the ignition system on your vehicle. It seems that the engine is having a minor misfire. Check the spark plug wires and see if any of them...

Nail in tire. Been driving with it. Slowly leaking. Left to park for now. Is the tire unrepairable to a point?

Hello, thank you for writing in. The tires need to be evaluated a little further before we justify getting a new one put on, or patching it. Take a look at the tread, and make sure it is evenly worn...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com