Volvo 760 Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Volvo 760 Mass Airflow Sensor Replacement is $287 with $192 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Volvo 760L4-2.3L TurboService typeMass Airflow Sensor ReplacementEstimate$610.59Shop/Dealer Price$744.49 - $1123.69
1985 Volvo 760L4-2.3L TurboService typeMass Airflow Sensor ReplacementEstimate$620.59Shop/Dealer Price$762.01 - $1163.72
1984 Volvo 760V6-2.8LService typeMass Airflow Sensor ReplacementEstimate$660.91Shop/Dealer Price$812.41 - $1244.36
1984 Volvo 760L6-2.4L Turbo DieselService typeMass Airflow Sensor ReplacementEstimate$660.91Shop/Dealer Price$812.39 - $1244.32
1986 Volvo 760L4-2.3L TurboService typeMass Airflow Sensor ReplacementEstimate$620.59Shop/Dealer Price$762.02 - $1163.75
1984 Volvo 760L4-2.3L TurboService typeMass Airflow Sensor ReplacementEstimate$989.57Shop/Dealer Price$1223.23 - $1901.68
1988 Volvo 760V6-2.8LService typeMass Airflow Sensor ReplacementEstimate$484.49Shop/Dealer Price$590.50 - $886.28
1985 Volvo 760V6-2.8LService typeMass Airflow Sensor ReplacementEstimate$484.49Shop/Dealer Price$590.87 - $886.94
Show example Volvo 760 Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Shawn

12 years of experience
287 reviews
Shawn
12 years of experience
Volvo S60 L5-2.5L Turbo - Mass Airflow Sensor - Reading, Pennsylvania
It seem like the issue was resolved.

Robert

15 years of experience
15 reviews
Robert
15 years of experience
Volvo S60 L5-2.5L Turbo - Mass Airflow Sensor - Tacoma, Washington
Excellent and timely job!!

Chris

21 years of experience
42 reviews
Chris
21 years of experience
Volvo S60 L5-2.5L Turbo - Mass Airflow Sensor - Ellenwood, Georgia
punctual, knowledgeable, courteous

Chris

22 years of experience
2229 reviews
Chris
22 years of experience
Volvo S60 L5-2.4L - Mass Airflow Sensor - Irvine, California
He diagnosed the problem quickly and offered his expertise regarding the pros and cons of buying the cheaper part and the higher quality part. In the end, the higher quality part turned out to be the same price. Thank you, Chris

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Volvo Mass Airflow Sensor Replacement services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

How Do Rain-Sensing Wipers Work?
Several Several decades ago, the only settings windshield wipers came with were low, high, and off. Later, an intermittent wiper feature was integrated into many windshield wiper switches, allowing drivers to reduce the frequency of wiper movements based on the...
How to Replace a Manifold Temperature Sensor
Signs of a failing manifold temperature sensor include rough idling and a rough running engine, and may result in a failed emissions test.
How to Replace a Refrigerant Pressure Sensor
The air conditioning system has a refrigerant pressure sensor that goes bad when the air conditioning does not work or only works intermittently.

My yukon is running like nthere is something terribly teribly wrong

The mass air flow sensor measures the speed of the air going into the engine. The P0101 code (https://www.yourmechanic.com/article/-p0101-obd-ii-trouble-code-mass-airflow-maf-circuit-operating-range-or-performance-problem-by-john-nelson) could be an electrical issue. The PO449 code (https://www.yourmechanic.com/article/p0449-obd-ii-trouble-code-evaporative-emission-control-system-vent-valve-solenoid-circuit-malfunction-by-spencer-clayton) is related to fuel tank emissions. Codes give you the area of...

Where's vehicle speed sensor B ?

Hello, thanks for writing in about your Hyundai Azera. There isn't a certain answer for the sensor B. Here is the basic diagnostic route of trouble code P2159 (https://www.yourmechanic.com/article/p2159-obd-ii-trouble-code-vehicle-speed-sensor-b-range-performance-by-jamahl-walker) to help you better understand the issue. If you'd like assistance...

Getting error code p0340 on my 2002 Ford Taurus DOHC 3.0

Hi - yes, you are correct. This error code (P0340 (https://www.yourmechanic.com/article/p0340-obd-ii-trouble-code-camshaft-position-sensor-circuit-malfunction-by-jamahl-walker)) means either the sensor, or the wiring and connectors for this sensor, are malfunctioning. Check the wiring connection for the sensor first, but most likely, the sensor has failed....

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com