Volvo 740 Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(17)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(17)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Volvo 740 Mass Airflow Sensor Replacement is $297 with $202 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1985 Volvo 740L6-2.4L Turbo DieselService typeMass Airflow Sensor ReplacementEstimate$1063.23Shop/Dealer Price$1310.29 - $2028.97
1985 Volvo 740L4-2.3LService typeMass Airflow Sensor ReplacementEstimate$620.59Shop/Dealer Price$762.01 - $1163.72
1987 Volvo 740L4-2.3LService typeMass Airflow Sensor ReplacementEstimate$620.59Shop/Dealer Price$762.01 - $1163.72
1986 Volvo 740L4-2.3L TurboService typeMass Airflow Sensor ReplacementEstimate$620.59Shop/Dealer Price$761.99 - $1163.68
1991 Volvo 740L4-2.3L TurboService typeMass Airflow Sensor ReplacementEstimate$590.59Shop/Dealer Price$724.52 - $1103.75
1989 Volvo 740L4-2.3LService typeMass Airflow Sensor ReplacementEstimate$590.59Shop/Dealer Price$724.51 - $1103.72
1992 Volvo 740L4-2.3LService typeMass Airflow Sensor ReplacementEstimate$595.59Shop/Dealer Price$729.37 - $1108.48
1987 Volvo 740L4-2.3L TurboService typeMass Airflow Sensor ReplacementEstimate$625.59Shop/Dealer Price$767.24 - $1169.14
Show example Volvo 740 Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volvo mechanics

Real customer reviews from Volvo owners like you.

Excellent Rating

(17)

Rating Summary
16
0
0
0
1
16
0
0
0
1

Peter

36 years of experience
346 reviews
Peter
36 years of experience
Volvo 740 L4-2.3L Turbo - Oxygen Sensor Replacement (Front/Upper/Upstream) - San Diego, California
Very knowledgeable and explained the whole process to me. Will use your services in the future.

Raymond

36 years of experience
63 reviews
Raymond
36 years of experience
Volvo 740 L4-2.3L - Oil Change - Seattle, Washington
Great guy. Stuck around even though I was an little under the weather and forgot about the apointment. He was really knowledgable and did a thorough job going above and beyond.

Jay

37 years of experience
961 reviews
Jay
37 years of experience
Volvo 740 L4-2.3L Turbo - Alternator - Upland, California
Will be sure to ask for him again if I have any other auto issues. Great mechanic and nice person to work with. Knows what he is doing.

Peter

36 years of experience
346 reviews
Peter
36 years of experience
Volvo 740 L4-2.3L Turbo - Inspection / Diagnostics - San Diego, California

Excellent Rating

(17)

Rating Summary
16
0
0
0
1
16
0
0
0
1
Number of Volvo 740 services completed
187+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volvo MECHANICS
600+
experts on our platform

Recent articles & questions

How Air Bags Work
Designed Designed to protect the occupants of a vehicle in the case of an accident, air bags inflate when the vehicle collides with another object, or otherwise suffers a sudden deceleration. Absorbing the energy of the impact, vehicle owners need...
How Long Does an Electronic Spark Control Last?
The The job of the electronic spark control is to control the engine timing. This part can also be called the "knock sensor", as it monitors any unusual knocking, or vibration that may be happening in the engine. This is...
What Does the Rain and Light Sensor Warning Light Mean?
The rain and light sensor warning light indicates when there is an issue with the sensor system. It will remain deactivated until fixed.

Overheating after replacing water pump, thermostat and coolant temp. Sensor

Hello. That hole in the water pump is there to let you know when the bearing in the water pump is failing. It starts leaking when the bearing is going out so that it will be replaced prior to a...

Car starts up and cuts off after a while of driving

This may be likely related to a fuel pump issue (https://www.yourmechanic.com/services/fuel-pump-replacement) or lack of fuel pressure. Low fuel pressure is something that can cause your car to struggle to idle (https://www.yourmechanic.com/services/car-idle-is-rough-inspection) or even stall (https://www.yourmechanic.com/services/car-is-stalling-inspection) when driving. This will also...

I installed a new crankshaft positioning sensor, now I'm getting misfires and code P0300. Is this supposed to happen?

Assuming you replaced your vehicle's crankshaft position sensor for a P0335 trouble code and that code has not returned, this leads me to believe that the new sensor is either faulty or misadjusted. The sensor replacement should not have caused...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com