Volkswagen Vanagon Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(17)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(17)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Volkswagen Vanagon Front Crankshaft Seal Replacement is $269 with $17 for parts and $252 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Volkswagen VanagonH4-2.1LService typeFront Crankshaft Seal ReplacementEstimate$317.46Shop/Dealer Price$333.56 - $367.26
1991 Volkswagen VanagonH4-2.1LService typeFront Crankshaft Seal ReplacementEstimate$301.24Shop/Dealer Price$314.16 - $345.48
Show example Volkswagen Vanagon Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(17)

Rating Summary
17
0
0
0
0
17
0
0
0
0

Harish

28 years of experience
588 reviews
Harish
28 years of experience
Volkswagen Vanagon H4-2.1L - Alternator - Huntersville, North Carolina
great service

Augie

32 years of experience
263 reviews
Augie
32 years of experience
Volkswagen Vanagon H4-2.1L - Pre-purchase Car Inspection - Altadena, California
Augury provided great service, with a friendly professional approach. It was a pleasure doing business with him.

Scott

37 years of experience
995 reviews
Scott
37 years of experience
Volkswagen Vanagon H4-2.1L - Pre-purchase Car Inspection - Phoenix, Arizona
Very thorough, took his time to go over his findings- very pleased!

Chet

42 years of experience
509 reviews
Chet
42 years of experience
Volkswagen Vanagon H4-1.9L - Car is not starting - San Diego, California
Great service as usual. Knowledgeable and reliable.

Excellent Rating

(17)

Rating Summary
17
0
0
0
0
17
0
0
0
0
Number of Volkswagen Vanagon services completed
187+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

P0221 OBD-II Trouble Code: Throttle/Pedal Position Sensor/Switch B Circuit Range/Performance Problem
P0221 P0221 Code Definition Throttle/Pedal Position Sensor/Switch B Circuit Range/Performance problem What the P0221 code means This code means that the voltage or resistance in the circuitry of the throttle position sensor has fallen out of the acceptable range specified...
How Long Does a Fuel Tank Last?
The The fuel tank is responsible for holding the gas or diesel that runs the vehicle. Obviously, this job is very important. On top of being extremely inconvenient, a leaking or faulty fuel tank is downright hazardous. Gas vapor is...
A Buyer’s Guide to the 2012 Infiniti G
The The 2012 Infiniti G is a sporty luxury sedan that has the looks, the power and speed, and the price that’s right for many buyers. It offers great handling, and aesthetics that will turn heads. Key Features The vehicle...

Transmission not working.

You didn't say whether your truck is manual or automatic, but I'm going to assume it's a manual. Most likely, the problem is with the clutch or clutch hydraulics. A qualified technician, like one from YourMechanic, will be able to...

Ignition Coil 5 is bad

Ignition coils can be a very tricky component to diagnose and there is virtually no way to tell when one may or may not fail without pulling one apart and doing extensive testing. Often times when they fail, it can...

Engine revving very high and very hard to brake

The pop you heard was probably a backfire through the intake. When that happened, it likely blew a vacuum hose off of the intake. Now the engine has a large air leak that is causing it to idle high and...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com