Volkswagen Golf Distributor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(272)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(272)

Distributor Replacement Service

How much does a Distributor Replacement cost?

On average, the cost for a Volkswagen Golf Distributor Replacement is $348 with $208 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Volkswagen GolfL4-2.0LService typeDistributor ReplacementEstimate$815.30Shop/Dealer Price$983.98 - $1481.90
2002 Volkswagen GolfL4-2.0LService typeDistributor ReplacementEstimate$806.29Shop/Dealer Price$973.20 - $1469.80
1994 Volkswagen GolfL4-2.0LService typeDistributor ReplacementEstimate$561.35Shop/Dealer Price$667.05 - $979.96
2000 Volkswagen GolfL4-2.0LService typeDistributor ReplacementEstimate$806.29Shop/Dealer Price$973.22 - $1469.84
2005 Volkswagen GolfL4-2.0LService typeDistributor ReplacementEstimate$806.29Shop/Dealer Price$974.70 - $1472.42
1991 Volkswagen GolfL4-2.0LService typeDistributor ReplacementEstimate$729.15Shop/Dealer Price$876.94 - $1315.81
1995 Volkswagen GolfL4-2.0LService typeDistributor ReplacementEstimate$561.35Shop/Dealer Price$667.06 - $979.99
2004 Volkswagen GolfL4-2.0LService typeDistributor ReplacementEstimate$806.29Shop/Dealer Price$973.22 - $1469.84
Show example Volkswagen Golf Distributor Replacement prices

What is a distributor and how does it work?

The distributor is an electro-mechanical component installed in a car’s ignition system to provide, time, and “distribute” the spark that occurs at each spark plug in an engine’s combustion cylinders. The distributor contains a rotating shaft with a gear at the bottom that engages a gear on the engine’s camshaft. Atop the shaft is a plastic rotor that has electrical contacts molded in. As the plastic rotor turns, it completes a high voltage circuit to each electrical contact, one per engine cylinder, that is molded into a plastic distributor cap. That high voltage then flows along the spark plug wire to the spark plug, creating the spark that ignites the air-fuel mixture in an engine cylinder.

Distributors vary in design: some may have the ignition coil built in, some have vacuum advance mechanisms attached for engine timing, and really old distributors may even have mechanical points. Vintage cars, that is cars older than 25 years, will more commonly be equipped with a distributor. Most modern car designs have replaced the distributor with fully electronic systems controlled by engine sensors for more precise, and more powerful, ignition system operation.

When to consider replacing the distributor:

  • Worn or damaged integral parts. Worn shaft bushings can result in wobbling or eccentric rotation of the rotor, resulting in misfires, loss of power, rough idle and poor mileage. If the shear pin breaks that secures the distributor shaft drive gear, complete loss of ignition spark distribution is the result. A failed ignition module that is mounted to the distributor housing may also be more cost-performance efficient to replace the entire distributor.
  • Visible oil leaks. Distributors are attached to the engine and consequently, there are seals, both internal and external, that keep oil from leaking at the point of attachment. External O-rings are serviceable but if an internal oil leak occurs, due to a worn shaft, for example, it might necessitate rebuilding or replacing the distributor.

How do mechanics replace the distributor?

Distributors are bolted to the engine block or the cylinder head. The replacement procedure is as follows:

  • Once all diagnostic tests are complete and the distributor is confirmed to be faulty, disconnect the battery negative cable.
  • Set engine at top dead center on the compression stroke for cylinder no. 1. Mark location of distributor housing and shaft relative to the engine mounting surface.
  • Remove primary and secondary ignition system wiring connected to the distributor. Unbolt and remove the distributor. Temporarily cover the hole in the head or block so no foreign matter drops into the engine.
  • Install new distributor and new cap and rotor, with the rotor pointing to the cylinder no. 1 firing-order electrode of the distributor cap. Reconnect all wiring and reconnect battery negative cable.
  • Start engine and set basic engine ignition timing per original equipment manager specification. Then check timing advance for proper function. Road test vehicle.

Is it safe to drive with a distributor problem?

Yes. A faulty distributor will cause increased fuel consumption, increased emissions and poor engine operation but does not generally create a safety hazard.

When replacing a distributor keep in mind:

  • Many ignition system failures will mimic a distributor failure, including faulty spark plugs, faulty wiring, and a worn cap and rotor. Mechanics will always test the distributor directly to ensure it is not needlessly replaced.
  • If a distributor is removed for testing and then re-installed, be sure that new o-rings are installed. Re-using old o-rings often results in oil leaks.
  • If the distributor is replaced, and the spark plugs and spark plug wires have considerable mileage on them, the best results will be obtained by replacing those components at the same time the new distributor is installed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(272)

Rating Summary
255
7
3
1
6
255
7
3
1
6

Miguel

22 years of experience
273 reviews
Miguel
22 years of experience
Volkswagen Golf L4-2.0L - Brake Pads Replacement (Front) - West Orange, New Jersey
Miguel is very good at what he does, you won't be disappointed

Rigoberto

12 years of experience
739 reviews
Rigoberto
12 years of experience
Volkswagen Golf L4-2.0L - Oil Pressure Sensor Replacement - Chicago, Illinois
Very nice did a excellent job today would recommend him to family and friends

Joe

44 years of experience
838 reviews
Joe
44 years of experience
Volkswagen Golf L4-1.8L Turbo - Oil Change - Tampa, Florida
He was very professional and friendly and even got to my home before the appointment time. I really love this service and Joe's approach to work.

Peter

29 years of experience
592 reviews
Peter
29 years of experience
Volkswagen Golf L4-1.9L Turbo Diesel - Car is not starting - North Hollywood, California
Peter was extremely helpful to me and gave me some great advice as to how to deal with the unfortunate car situation I found myself in. He showed me different parts of my engine and what the condition of it actually was so I could have the information I needed to make informed decisions as to how to move forward.

Excellent Rating

(272)

Rating Summary
255
7
3
1
6
255
7
3
1
6
Number of Volkswagen Golf services completed
2992+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

10 Best Stores to Buy Auto Parts in San Jose, California
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in San Jose is NAPA Auto Parts.
How to Calculate Horsepower
Horsepower determines how fast an engine can propel a car. Find out how to calculate horsepower for different types of cars and engines.
B1953 OBD-II Trouble Code: Seat Rear Up/Down Potentiometer Feedback Circuit Short To Ground
B1953 means there is a shorted circuit in the rear seat's potentiometer, most likely due to bad wiring or a faulty potentiometer.

Inconsistent pedal to actual rpm response, jumpy rpm, no rpm power

Hi There, It sounds like you are describing the symptoms of a failing throttle position sensor. The throttle position sensor (https://www.yourmechanic.com/services/throttle-position-sensor-replacement) monitors the throttle position of the throttle plate inside the throttle body in relation to your foot position on...

on starting engine light & throttle control and traction control light comes on and car idols hard no codes when scanned

Hello, and thank you for writing in. Unfortunately the first technician is correct in that this can be cause by a wide variety of issues. Considering that it is intermittent, we can assume that there is either an electrical issue...

o2b1s1= 1.95 V , o2b1s2=0.70 V , P0420

The upstream oxygen sensor appears to be out of range. The expected value should be between 0.2 and 0.9 volts with a frequency of 1 to 5 Hertz. Your report shows 1.9 volts. I would first look at a real...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com