Volkswagen Golf City Brake Master Cylinder Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(7)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(7)

Brake Master Cylinder Replacement Service

How much does a Brake Master Cylinder Replacement cost?

On average, the cost for a Volkswagen Golf City Brake Master Cylinder Replacement is $504 with $322 for parts and $182 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Volkswagen Golf CityL4-2.0LService typeBrake Master Cylinder ReplacementEstimate$846.30Shop/Dealer Price$1012.18 - $1499.29
2010 Volkswagen Golf CityL4-2.0LService typeBrake Master Cylinder ReplacementEstimate$834.59Shop/Dealer Price$998.17 - $1483.56
2007 Volkswagen Golf CityL4-2.0LService typeBrake Master Cylinder ReplacementEstimate$834.59Shop/Dealer Price$998.20 - $1483.62
2008 Volkswagen Golf CityL4-2.0LService typeBrake Master Cylinder ReplacementEstimate$834.59Shop/Dealer Price$998.20 - $1483.61
Show example Volkswagen Golf City Brake Master Cylinder Replacement prices

What is the brake master cylinder and how does it work?

The brake master cylinder has a piston that pressurizes fluid in the brake lines to each wheel cylinder as you apply force to the brake pedal. That pressure moves the pistons that are in the wheel cylinders. As the pistons in those wheel cylinders move, they force the brake pads or shoes tightly against the rotors or drums allowing the car to stop quickly.

The size of the pistons in the master cylinder and in the wheel cylinders are carefully selected when designing a car. This allows drivers to apply moderate pressure on the brake pedal when stopping, but creates tremendous pressure applied at the wheel cylinders. A car can then stop quickly even at high speeds. Depending on how much force is applied to the brake pedal, the pressure in a car’s brake lines will typically be in the range of 800 PSI to 2,000 PSI.

Master Cylinder

When to replace the master cylinder?

  • External fluid leaks. There should be no fluid visible on the external surfaces of any portion of the master cylinder or the plastic fluid reservoir.
  • Low, slowly falling, or spongy brake pedal. Faulty internal seals on the piston can cause internal leaks and also seepage of brake fluid into the power assist brake booster. Internal leaks will typically be accompanied by a low pedal, a spongy brake pedal, or a pedal that slowly sinks as you maintain pressure. In all cases, you will experience reduced braking abilities.
  • Discolored brake fluid. No brake fluids, other than those specified for the year, make, and model, are fully compatible with a car’s internal rubber seals in the master cylinder. Discoloration of brake fluid can also occur due to moisture and particulate contaminants in the fluid.
  • Warning lights on the dash. If the brake system warning light illuminates, there are several potential causes but failure of the master cylinder is in the list of causes that would have to be investigated.

How do mechanics replace the brake master cylinder?

  • On vehicles with power brakes, the master cylinder is bolted to the metal housing of the power brake booster. There is usually an electrical plug connecting to a brake fluid level sensor on the master cylinder reservoir and that plug must be disconnected.
  • Once all steel brake lines are disconnected from the master cylinder, the master cylinder is unbolted from the brake booster and removed from the vehicle.
  • The new master cylinder must be bench-bled to expel air from internal passages that contain the piston. Then the new master cylinder is bolted to the brake booster and the brake lines are reattached. The electrical plug for the fluid level sensor is reconnected.
  • Whenever a new master cylinder is installed, brakes lines to wheel positions must be bled to remove air, old fluid and contaminants. If your vehicle is equipped with anti-lock brakes, the mechanic may use a bidirectional scan tool during brake bleeding to actuate the ABS pump, thus ensuring that all air is removed from the complex valving in the ABS system.
  • All brake line connections that were removed during the master cylinder replacement are inspected for any leakage and the vehicle is road tested to ensure normal operation of the brakes.

Is it safe to drive with a master cylinder problem?

No, any fault in the master cylinder, which is part of the braking system creates a safety risk. A fully operational brake system is essential to quickly stopping your car. Driving a vehicle isn’t safe, if the master cylinder is leaking or has other faults, as braking distances might be longer than normal. The braking system on a vehicle is among the most important safety systems and must be fully functional to safely drive your vehicle.

When replacing the master cylinder keep in mind:

  • The master cylinder is only one component of many in a vehicle’s braking system. During replacement of the master cylinder, all vehicle braking system components should be inspected to ensure maximum braking power is available.
  • The amount of friction material remaining on the brake pads and brake shoes should be verified.
  • Brake lines and flexible rubber hoses at each wheel position should be inspected for corrosion and deterioration.
  • The power brake booster should be evaluated to ensure that power assist is working properly.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0

Stefan

18 years of experience
367 reviews
Stefan
18 years of experience
Volkswagen Golf L4-1.8L Turbo - Brake Master Cylinder - Pleasant Hill, California

Matthew

13 years of experience
183 reviews
Matthew
13 years of experience
Volkswagen Jetta L5-2.5L - Brake Master Cylinder - Indianapolis, Indiana
Very good mechanic

Glen

23 years of experience
35 reviews
Glen
23 years of experience
Volkswagen Jetta L5-2.5L - Brake Master Cylinder Replacement - Las Vegas, Nevada
Did not know what I was going to do about my car. I'm so happy to have someone who knows what he is doing and got the job done!

Jose

21 years of experience
36 reviews
Jose
21 years of experience
Volkswagen Eos L4-2.0L Turbo - Brake Master Cylinder - Opa Locka, Florida
Excellent mechanic with a lot of knowledge. Was patient and thorough with the fixes and showed me proof of what else should be fixed. Super helpful, highly recommend

Excellent Rating

(7)

Rating Summary
7
0
0
0
0
7
0
0
0
0
Number of Volkswagen Brake Master Cylinder Replacement services completed
77+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

How to Bundle Your Car Insurance and Homeowners Insurance
Home and auto insurance quotes are often cheaper if bundled together into one policy. Bundled insurance policies are less costly and easier to manage.
P0156 OBD-II Trouble Code: 02 Sensor Circuit Malfunction (Bank 2 Sensor 2)
P0156 P0156 trouble code definition Oxygen Sensor Circuit Malfunction (Bank 2 Sensor 2) What the P0156 code means The purpose of the oxygen sensor is to monitor the amount of oxygen present in the exhaust and relay this information to...
How to Handle a Burst Tire
Tires burst when the tire pressure is too low or too high, there is a mechanical defect in the tire itself, or a foreign object damages the tire.

My car gas pedal seems stuck when pressing on it while in park or drive 1994 Honda Accord

Hi there - I believe the throttle body (https://www.yourmechanic.com/article/how-to-buy-a-good-quality-throttle-body) on your engine is worn out, specifically the throttle sensor portion of the unit (internal component). It needs to be replaced. I recommend a throttle body inspection (https://www.yourmechanic.com/services/loss-of-power-inspection) performed by a...

Our car is overheating but WHYYYY

You will need to have the cooling system pressure tested to see if the radiator or somewhere on engine is leaking. You may have an intake thermostat housing leak or water pump leaking. You should not drive it if temperature...

my car wont let me go past 70 mph and jerks if i try to

You could have a restriction in the fuel supply system but there are other possibilities such as faulty sensor readings on air intake. Among common possibilities for loss of power are throttle body faults (electronic throttle controls, mass airflow sensor,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com