Volkswagen Cabrio Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(52)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(52)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Volkswagen Cabrio Power Steering Pressure Hose Replacement is $329 with $161 for parts and $168 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Volkswagen CabrioL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$683.74Shop/Dealer Price$812.50 - $1189.04
2000 Volkswagen CabrioL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$1410.39Shop/Dealer Price$1721.39 - $2649.44
2001 Volkswagen CabrioL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$1410.39Shop/Dealer Price$1721.42 - $2649.49
1999 Volkswagen CabrioL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$629.19Shop/Dealer Price$744.92 - $1087.09
1997 Volkswagen CabrioL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$498.15Shop/Dealer Price$582.89 - $828.10
1996 Volkswagen CabrioL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$498.15Shop/Dealer Price$581.29 - $825.30
1998 Volkswagen CabrioL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$629.19Shop/Dealer Price$744.94 - $1087.12
2002 Volkswagen CabrioL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$1410.39Shop/Dealer Price$1721.42 - $2649.49
Show example Volkswagen Cabrio Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Volkswagen mechanics

Real customer reviews from Volkswagen owners like you.

Excellent Rating

(52)

Rating Summary
50
2
0
0
0
50
2
0
0
0

David

11 years of experience
193 reviews
David
11 years of experience
Volkswagen Cabrio L4-2.0L - Windshield Wiper Motor Replacement (Front) - Prospect Park, Pennsylvania
David arrived early, was pleasant and friendly worked efficiently and did an overall great job. Exceeded expectations. All around pleasant experience will recommend and ask for David when needing work done l!

Daniel

18 years of experience
32 reviews
Daniel
18 years of experience
Volkswagen Cabrio L4-2.0L - 5,000 Miles Maintenance Service - McDonough, Georgia
Came promptly and did a very good job. I highly recommend him.

Pardeep

22 years of experience
1277 reviews
Pardeep
22 years of experience
Volkswagen Cabrio L4-2.0L - Car is not starting - San Jose, California
Car wasn't starting and had clicking noise coming from fuse box area under drivers side dash. I was worried might be fuse/relay issue, but not knowledgeable enough. Set an appointment with Pardeep who came earlier than my appointment, which was great, and ran a quick test. Turned out to be a simple battery replacement. Quick, easy, and professional. Great first experience.

Jose

11 years of experience
285 reviews
Jose
11 years of experience
Volkswagen Cabrio L4-2.0L - Oil Change - Clearwater, Florida
Great

Excellent Rating

(52)

Rating Summary
50
2
0
0
0
50
2
0
0
0
Number of Volkswagen Cabrio services completed
572+
services done by our mechanics
TOTAL NUMBER OF EXPERT Volkswagen MECHANICS
1000+
experts on our platform

Recent articles & questions

P2784 OBD-II Trouble Code: Input/Turbine Speed Sensor A/B Correlation
P2784 means a signal from the turbine speed sensor was detected due to electrical issues, faulty sensors or solenoids or bad transmission fluid.
Should I Trade In My Car?
Ready Ready for a new automobile? Unsure about trading in your old car? If you are thinking of trading in your current daily driver for a new set of wheels, here are some things to consider: Do you have any...
How to Buy and Install a Booster Seat
Booster seats are important safety features for young children. When a child has outgrown their child restraint system, but is not yet big enough to safely fit the adult-sized lap and shoulder belts, it is time for them to use...

P0101 Still shows after MAF replacement.

You are correct, there is a TSB (https://www.yourmechanic.com/article/how-to-use-a-technical-service-bulletin-by-parker-hill) to reprogram the ECU for the symptoms you describe. The reprogramming should take care of your concern of the P0101 code (https://www.yourmechanic.com/article/-p0101-obd-ii-trouble-code-mass-airflow-maf-circuit-operating-range-or-performance-problem-by-john-nelson). You will need to go to a Nissan dealer to...

can i use struts, axle, and sway bar from 2002 town and country and put it on a 2005 grand caravan

The front struts and sway bar on the two vehicles appear to have identical aftermarket part numbers. The axle from a 2004 Caravan appears to be a direct interchange for the 2002 Town and Country but the 2005 model year...

It’s confusing the car gave me a P0017 code so I change my crankshaft sensor I’ve change my camshaft sensors I’ve had my oil changed and my transmission fluid flushed upon them doing a diagnostic and gave me camshaft sensors before I change them again. Now it’s giving me the same thing 0017 code at the resetting the codes

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com