Toyota MR2 Spyder Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(31)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(31)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Toyota MR2 Spyder Car Thermostat Replacement is $400 with $92 for parts and $308 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Toyota MR2 SpyderL4-1.8LService typeCar Thermostat ReplacementEstimate$524.06Shop/Dealer Price$577.75 - $720.98
2005 Toyota MR2 SpyderL4-1.8LService typeCar Thermostat ReplacementEstimate$504.24Shop/Dealer Price$554.04 - $694.36
2003 Toyota MR2 SpyderL4-1.8LService typeCar Thermostat ReplacementEstimate$504.24Shop/Dealer Price$554.09 - $694.46
2000 Toyota MR2 SpyderL4-1.8LService typeCar Thermostat ReplacementEstimate$504.24Shop/Dealer Price$554.09 - $694.45
2001 Toyota MR2 SpyderL4-1.8LService typeCar Thermostat ReplacementEstimate$504.24Shop/Dealer Price$557.33 - $700.12
2002 Toyota MR2 SpyderL4-1.8LService typeCar Thermostat ReplacementEstimate$504.24Shop/Dealer Price$554.40 - $694.99
Show example Toyota MR2 Spyder Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(31)

Rating Summary
29
1
1
0
0
29
1
1
0
0

Trung

13 years of experience
412 reviews
Trung
13 years of experience
Toyota MR2 Spyder L4-1.8L - Exhaust Manifold Repair - Los Altos, California
Trung did a great job and worked thru the inevitable challenges of replacing parts on a 15 year old car....in this case a frozen exhaust manifold stud which broke on dis-assembly. He obtained the part without me having to deal with it and was promptly back the next day to finish up while I was at work.

Patrick

33 years of experience
369 reviews
Patrick
33 years of experience
Toyota MR2 Spyder L4-1.8L - Check Engine Light is on - Las Vegas, Nevada
This was the first time I used this service, I wasn't exactly sure how or what I was supposed to do. I later figured it out over time. At the end of the appointment, he figured out or will be trying to solve the engine light issue. The same problem that a regular mechanic couldn't figure out after looking at my car for 6 hours but managed to "find other issues" with the vehicle. I may be using this service more in the service, I like the fact that they come to the work so we don't have to take off time.

David

17 years of experience
639 reviews
David
17 years of experience
Toyota MR2 Spyder L4-1.8L - Alternator - Vallejo, California
Replaced the alternator. Timely and efficient. Will use again!

James

32 years of experience
705 reviews
James
32 years of experience
Toyota MR2 Spyder L4-1.8L - Valve Cover Gasket - La Mirada, California
Thank you so much James and YourMechanic. Great service and communication all around. I would request James and use YouMechanic again for anything else.

Excellent Rating

(31)

Rating Summary
29
1
1
0
0
29
1
1
0
0
Number of Toyota MR2 Spyder services completed
341+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1700+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Mercedes Benz S-Class
If If you’re looking for a vehicle that delivers top-of-the-line features, comfort, performance and safety, all while showing off the prestige of the driver, the 2012 Mercedes Benz S-Class is your choice. Key Features With Active Body Control and a...
How to Replace an Air Conditioning Compressor Relay
The air conditioning compressor relay supplies power to the compressor for AC function. This relay should be replaced if it's proven to be faulty.
10 Best Stores to Buy Auto Parts in Providence, Rhode Island
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Providence is Banchwerks.

Ignition lock faulty

The ignition lock assembly can experience a failure due to a faulty sensor, module, or even a worn-out key. I will advise that you have an experienced mechanic, like the ones at YourMechanic, to inspect the entire ignition lock assembly...

Car wouldn't start, electronics work

Hello there. Thanks for writing in about your 2001 Mercedes CLK430. There are a few potential causes for this. Most common would be a fuel pump (https://www.yourmechanic.com/services/fuel-pump-replacement), battery (https://www.yourmechanic.com/services/battery-replacement), battery cable (https://www.yourmechanic.com/services/battery-cable-replacement), starter (https://www.yourmechanic.com/services/starter-replacement), or ignition switch (https://www.yourmechanic.com/services/ignition-switch-replacement). Any of...

2009 Honda Accord EXL VSA an engine light still comes on after the crankshaft sensor was replaced. The inspections said it was the

The VSA warning light means that there is a fault somewhere in the complex sensor system that makes the system work by regulating the engine's output and selectively applying braking. There are wheel speed sensors, brake pressure modulators, interconnecting wiring...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com