Toyota GR Supra Car Battery Replacement Costs

Estimate price near me

Service Location

Customer Ratings

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Toyota GR Supra Car Battery Replacement is $403 with $263 for parts and $140 for labor. Prices may vary depending on your location.

Car	Service	Estimate	Shop/Dealer Price
2022 Toyota GR SupraL6-3.0L Turbo	Service typeCar Battery Replacement	Estimate$755.00	Shop/Dealer Price$908.60 - $1361.30
2021 Toyota GR SupraL6-3.0L Turbo	Service typeCar Battery Replacement	Estimate$671.37	Shop/Dealer Price$804.55 - $1199.96
2023 Toyota GR SupraL6-3.0L Turbo	Service typeCar Battery Replacement	Estimate$745.99	Shop/Dealer Price$897.85 - $1349.24
2021 Toyota GR SupraL4-2.0L Turbo	Service typeCar Battery Replacement	Estimate$737.03	Shop/Dealer Price$886.65 - $1331.32
2020 Toyota GR SupraL6-3.0L Turbo	Service typeCar Battery Replacement	Estimate$671.37	Shop/Dealer Price$806.05 - $1202.58
2022 Toyota GR SupraL4-2.0L Turbo	Service typeCar Battery Replacement	Estimate$745.99	Shop/Dealer Price$897.99 - $1349.49
2023 Toyota GR SupraL4-2.0L Turbo	Service typeCar Battery Replacement	Estimate$745.99	Shop/Dealer Price$897.86 - $1349.27

Show example Toyota GR Supra Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(1,037)

Rating Summary

1,005

15

6

2

9

1,005

15

6

2

9

SEE REVIEWS NEAR ME

Theodore

17 years of experience

1794 reviews

Request Theodore

Theodore

17 years of experience

Request Theodore

by Raj

Toyota Venza V6-3.5L - Battery - Redmond, Washington

competent and knowledgeable

Joseph

21 years of experience

718 reviews

Joseph

21 years of experience

by Angela

Toyota Corolla L4-1.8L - Car Battery Replacement - West Jordan, Utah

Quick and friendly!

Luis

19 years of experience

363 reviews

Luis

19 years of experience

by MARK

Toyota Prius L4-1.8L Hybrid - Car Battery Replacement - Colonia, New Jersey

Luis was awesome, thanks so much!

Claud

9 years of experience

640 reviews

Claud

9 years of experience

by Kristina

Toyota Prius L4-1.5L Hybrid - Battery - Hazel Park, Michigan

Claud did a wonderful job, I am super pleased with the service he provided. My battery is in the trunk area of my Prius hatchback. I had put the backseat down to clear out my returnables for him. He put my seats back up and put eveything back together...my car looked even tidier than before he got there.! He put air in one of my tires because he noticed it was low, and informed me of some upcoming minor maintenance to keep an eye on. Car is running great, didn't have to wait long for him to finish, and he was even early for the appointment.

Excellent Rating

(1,037)

Rating Summary

1,005

15

6

2

9

1,005

15

6

2

9

SEE REVIEWS NEAR ME

Recent articles & questions

Symptoms of a Bad or Failing Trunk Lock Actuator

Common signs include the trunk not opening even after hearing a click, the release buttons not working, and an actuator that doesn't stop clicking.

How to Replace Transfer Case Fluid

Transfer case fluid lubricates the gears of your four-wheel drive (4WD) and all-wheel drive (AWD) vehicle. Dirty case fluid affects performance.

B1967 OBD-II Trouble Code: AC Post Heater Sensor Circuit Short to Ground

B1967 means the air conditioning sensor is not working properly, likely due to damaged electrical components.

Transmission problem - 2010 Buick Lacrosse CXL

The Diagnostic Trouble Code P0989 (https://www.yourmechanic.com/article/p0989-obd-ii-trouble-code-transmission-fluid-pressure-sensor-switch-e-circuit-low-by-brady-klopfer) can set due to the following causes: Defective transmission fluid pressure sensor; Malfunctioning electronic pressure control solenoid; Defective electrical components, such as wires, connectors, and fuses; Insufficient transmission fluid levels; Dirty transmission fluid; Blockages...

If the rear impact bar and energy bar are broken from a rear-end collision, is the car roadworthy and safe?

Hi there. The vehicle can be driven, but it will not provide any protection against another accident from the rear. If you want to be safe driving this vehicle, then the damage needs to be repaired as soon as possible....

I am looking to buy a toyota corolla 2004 that has a oil leak can I buy it

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com