Toyota Camry Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(165)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(165)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Toyota Camry Car Battery Replacement is $249 with $154 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Toyota CamryV6-3.5LService typeCar Battery ReplacementEstimate$464.39Shop/Dealer Price$561.74 - $831.29
2006 Toyota CamryV6-3.3LService typeCar Battery ReplacementEstimate$444.39Shop/Dealer Price$541.76 - $811.32
2020 Toyota CamryL4-2.5LService typeCar Battery ReplacementEstimate$589.99Shop/Dealer Price$723.76 - $1102.52
1987 Toyota CamryL4-2.0LService typeCar Battery ReplacementEstimate$402.11Shop/Dealer Price$488.89 - $726.72
2009 Toyota CamryL4-2.4LService typeCar Battery ReplacementEstimate$444.39Shop/Dealer Price$541.77 - $811.35
1985 Toyota CamryL4-2.0LService typeCar Battery ReplacementEstimate$433.31Shop/Dealer Price$527.91 - $789.16
1997 Toyota CamryL4-2.2LService typeCar Battery ReplacementEstimate$449.39Shop/Dealer Price$546.62 - $816.08
1991 Toyota CamryV6-2.5LService typeCar Battery ReplacementEstimate$425.47Shop/Dealer Price$517.09 - $768.90
Show example Toyota Camry Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Toyota mechanics

Real customer reviews from Toyota owners like you.

Excellent Rating

(165)

Rating Summary
159
1
2
1
2
159
1
2
1
2

Stacy

20 years of experience
330 reviews
Stacy
20 years of experience
Camry 2000 - Battery - Atlanta, GA
Stacy was terrific and this is an amazing service!! He kept me informed about his schedule and was very professional.

Diana

17 years of experience
37 reviews
Diana
17 years of experience
Camry 2004 - Battery - Springfield, NJ
Very professional, knowledgable and friendly!

Brett

20 years of experience
238 reviews
Brett
20 years of experience
Camry 2007 - Battery - Lancaster, SC
Very nice guy and very helpful.

Arturo

25 years of experience
253 reviews
Arturo
25 years of experience
Camry 2015 - Battery - San Diego, CA
Arturo let me know he could arrive early. He explained what he was doing and was quick and efficient. Friendly yet professional, I can recommend him to anyone. Thank you for getting me back on the road sooner than I expected.

Excellent Rating

(165)

Rating Summary
159
1
2
1
2
159
1
2
1
2
Number of Toyota Camry Car Battery Replacement services completed
1815+
services done by our mechanics
TOTAL NUMBER OF EXPERT Toyota MECHANICS
1600+
experts on our platform

Recent articles & questions

How Long Does an Ignition Lock Cylinder Last?
For For most car owners, getting in and cranking their vehicle up is not something that they think about. In order for a car to crank properly, a number of different components will have to work together. Among the most...
P0412 OBD-II Trouble Code: Secondary Air Injection System Switching Valve A Circuit Malfunction
P0412 P0412 code definition Secondary Air Injection System Switching Valve A Circuit Malfunction What the P0412 code means P0412 is an OBD-II generic code that the engine control module (ECM) got input from the air injection system driver that the...
How to Use the Ford Active Park Assist Feature
There There are few driving maneuvers as universally disliked as the parallel park (https://www.yourmechanic.com/article/how-to-park-your-car). Most people still remember that terrifying sequence of movements in their driving test. Even people who live in metropolitan areas, people who must regularly parallel park,...

The vdc light and service engine lights came on, car started missing and then died?

Hi there. The VDC (vehicle dynamic control) and service engine lights coming on, is an indication there is a fault or faults recognized. The engine misfires, then died, and sluggishness are likely the fault(s) recognized. Turning the ignition switch off...

Does my 2010 Chevrolet Cobalt have 2 timing chains?

Hi Tiffany. Thanks for contacting us today. I think your mechanic is simply confused with the nomenclature, but there are (2) chains that comprise the timing system on a 2.2 Ecotec engine. The first is the timing chain, which is...

I have a 2012 Jeep [Compass](/topics-compass/) that has a red lightning bolt light and check engine light that is intermittent. I replaced the throttle body and the accelerator pedal sensor. I did the recalibration with the pedal and all lights stayed off for about 30 min. Then they came back. I went back through made sure all.of the connections and the hoses were tight and good. Started it up and same thing. I had a friend with a shop scanner come and check and he saw circuit A and B looked good they were running the same however while it sat idle the red lightning bolt came up. I don't know what to do next.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com