Suzuki XL-7 Uneven tire wear Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(106)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(106)

Uneven tire wear Inspection Service

How much does a Uneven tire wear Inspection cost?

On average, the cost for a Suzuki XL-7 Uneven tire wear Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2004 Suzuki XL-7V6-2.7LService typeUneven tire wear InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2003 Suzuki XL-7V6-2.7LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2009 Suzuki XL-7V6-3.6LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2002 Suzuki XL-7V6-2.7LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2008 Suzuki XL-7V6-3.6LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2007 Suzuki XL-7V6-3.6LService typeUneven tire wear InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2006 Suzuki XL-7V6-2.7LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
2005 Suzuki XL-7V6-2.7LService typeUneven tire wear InspectionEstimate$99.99Shop/Dealer Price$110.24 - $117.94
Show example Suzuki XL-7 Uneven tire wear Inspection prices

Over time all tires will wear down and need to be replaced. But while this is an eventuality for all vehicles, there are things a driver can do to help increase the life of their tires. Wear patterns on tires can reveal a lot about how the vehicle rides and if any adjustments need to be made. Being able to identify wear on the tires can help you and the mechanic make the appropriate changes.

How this system works:

When you purchase a new or certified used vehicle from a dealership, it should come with four matching tires, each inflated to the correct psi (pounds per square inch). Over time the tread on each tire will begin to wear and need to be changed. When a tire needs to be changed, it is possible that all will need to be changed. Replacing a single tire with a different brand or different size tire may throw off the balance of the vehicle. A mechanic can advise you on when to change your tires and how it should be done.

Common reasons for this to happen:

  • Tire Over/under inflation: Every tire has a recommended psi inscribed on the side of tire, indicating how much air should be put in. Over or under inflating the tire will cause the tire to wear unevenly. An over-inflated tire will wear more quickly around the middle of the tire. An under-inflated tire will wear more quickly on the edges. You mechanic will be able to show you where the recommended psi number is located.

  • Car is out of alignment: New cars are aligned by the manufacturer in a certain way to help maintain efficiency, and increase the life of the tires. In a vehicle that has come out of alignment, the tires are not facing perfectly straight and the vehicle must work harder to travel in a straight line. You can notice if you vehicle is out of alignment if it pulls either left or right, the steering wheel is at an angle while driving straight, and the tires are wearing down unevenly.

  • Tires are not rotated: In vehicles where the engine is at the front, the front tires bear more weight than the ones in the rear. In addition to this weight, they are also responsible for braking and turning. It is recommended that you rotate tires from front to back and side to side to ensure even wear. Tires that have not been rotated will show increased signs of wear at the front tires and decreased wear at the back.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the reason why your vehicle’s tire have worn unevenly. The mechanic will then provide a detailed inspection report outlining the nature of the tire wear and the cost of any repairs that need to be made.

How it's done:

A mechanic will first inspect the tires to determine the wear and get a better idea of what might have been going wrong. If the mechanic suspects that the tire is under or over inflated, he or she will use a tire pressure gauge to determine the exact pressure inside the tire. The mechanic will then compare that reading to the one on the outside of the tire. Depending on the measurement, the mechanic may have to inflate or let some air out of the tires. Wear in the center of the tire will most likely mean the mechanic will be letting out air, while wear on the edges mean the mechanic will most likely be adding air.

If the mechanic suspects that the vehicle is out of alignment, they will have to adjust suspension components that may have been affected by hitting a pothole or curb. Suspension components may also begin to fail over time, causing the vehicle to come out of alignment. While aligning your vehicle, the mechanic will also see if suspension components need to be replaced. The mechanic will adjust each side of the vehicle so that the tires are flat on the road and not at an angle.

If the wear on the tires is more significant at the front, the tires may need to be rotated. The mechanic will remove each tire and rotate it from front to back and side to side.

In all repairs the mechanic will also check the tread on the tires to make sure that they are still good. Tires that have low tread will not be as effective as new tires. When replacing tires, it is important to have tires of the same brand and size to ensure that they all wear evenly.

How important is this service?

As tire wear becomes worse, they will begin to lose gripping ability and need to be replaced. If you notice that your tires are wearing unevenly, especially in the event of a misalignment, you should have a mechanic look at your vehicle. Paying attention to signs like when the vehicle pulls left or right is an indicator that the vehicle needs to be aligned. Having tire wear examined and corrected can help increase the life of the tire, saving you time and money.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(106)

Rating Summary
100
4
0
0
2
100
4
0
0
2

David

16 years of experience
637 reviews
David
16 years of experience
Suzuki XL-7 V6-3.6L - Shift Selector Cable - Pittsburg, California
He was great

Michael

21 years of experience
280 reviews
Michael
21 years of experience
Suzuki XL-7 V6-3.6L - Power Steering Pump - Moreno Valley, California
Mike accepted the job at the last minute scheduling on a Holiday Weekend. He is dedicated to his job, showed up on time and carried himself in a professional matter at all times. Thank you for the hard work!

Dellano

18 years of experience
520 reviews
Dellano
18 years of experience
Suzuki XL-7 V6-2.7L - Car starts and then dies - Lanham, Maryland
Mr. Delano was on time. As a matter of fact he arrived early. He was very polite and very helpful. He told me what the problem with my car was in no time after inspecting it. This was the first Time I ever used this company. I was very impressed with the service that was given.

Shaun

10 years of experience
542 reviews
Shaun
10 years of experience
Suzuki XL-7 V6-2.7L - Oil Change - Mesa, Arizona
great

Excellent Rating

(106)

Rating Summary
100
4
0
0
2
100
4
0
0
2
Number of Suzuki XL-7 services completed
1166+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

Top Automotive News & Stories: July 20-26
Each week we compile the best announcements and developments from the world of cars. Here are the topics you can’t miss from July 20 to 26. Regulators Abandon 54.5 MPG Target In 2011, the...
P0254 OBD-II Trouble Code: Injection Pump Fuel Metering Control “A” High (Cam/Rotor/Injector)
The The P0254 Trouble Code indicates issues with the inject pump fuel metering control “A” high (cam/rotor/injector). What the P0254 code means When this code appears, it means that the powertrain control module has found an issue with the signal...
P0775 OBD-II Trouble Code: Pressure Control Solenoid B Malfunction
P0775 means there is insufficient fluid pressure within a solenoid operating the automatic transmission due to leaks, low or dirty fluid.

Coolant boils, not sure if overheating.

Hello. It does sound like a thermostat issue. If the thermostat is not opening as it should then this will occur. It also sounds like the radiator cap may not be holding pressure. I would typically test the thermostat and...

Check engine light

Hello. If the harnesses do not match then the sensor you have is incorrect. A search on my end also reveals that your vehicle uses a four wire sensor, however if the harness on the vehicle uses a 2 wire...

Rough idling

It sounds like your throttle body is dirty (https://www.yourmechanic.com/services/clean-throttle-body). You may want to check it and make sure it is not sticking. Check for loose connections within the system also. Your car may also be idling rough (https://www.yourmechanic.com/services/car-idle-is-rough-inspection) due to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com