Suzuki SX4 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(64)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(64)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Suzuki SX4 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Suzuki SX4L4-2.0LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2007 Suzuki SX4L4-2.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2008 Suzuki SX4L4-2.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2013 Suzuki SX4L4-2.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2011 Suzuki SX4L4-2.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2009 Suzuki SX4L4-2.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2012 Suzuki SX4L4-2.0LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$109.87 - $117.28
Show example Suzuki SX4 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(64)

Rating Summary
61
2
1
0
0
61
2
1
0
0

John

20 years of experience
582 reviews
John
20 years of experience
Suzuki SX4 L4-2.0L - Car is not starting - Orlando, Florida
Great and knowledgeable person!

Chris

20 years of experience
448 reviews
Chris
20 years of experience
Suzuki SX4 L4-2.0L - Catalytic Converter - Hillsboro, Oregon
Very professional. Very knowledgeable.

David

10 years of experience
193 reviews
David
10 years of experience
Suzuki SX4 L4-2.0L - Car Starter Repair - Collingswood, New Jersey
5 stars all the way. Showed up early no BS had the part ready to go and got my car back on the road in no time! I Highly recommend David.

Andrew

11 years of experience
860 reviews
Andrew
11 years of experience
Suzuki SX4 L4-2.0L - Brake Pads Replacement (Front) - Kansas City, Missouri
Professional, honest and good at his job. What more can you ask for?

Excellent Rating

(64)

Rating Summary
61
2
1
0
0
61
2
1
0
0
Number of Suzuki SX4 services completed
704+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

Why Does the Air Coming Through My A/C Vents Smell Bad?
Over time your car A/C system can start to smell unpleasant. If your A/C system smells bad check for mildew in the vents or install a new air filter.
Disabled Driver Laws and Permits in Arkansas
The The rules for obtaining disabled driver status differ by state. The following are some of the qualifications you must possess in the state of Arkansas to obtain disabled driver status. How do I know if I qualify for disabled...
P0539 OBD-II Trouble Code: A/C Evaporator Temperature Sensor Circuit Intermittent
P0539 means the A/C evaporator temperature sensor has a too high/low voltage signal, usually caused by a faulty evaporator temperature sensor.

my son replaced a brake line on my cadillac deville 2001 but he cant seem to bleed them properly

Sometimes replacing a brake line or hose can cause the brake system to become air-bound. Try gravity bleeding the brake system first. With the brake fluid reservoir cap removed and the brake fluid level correct, loosen the bleeder screw at...

I have a 2008 Acura TL. At idle the car is revving to low at about 500-600 rpm. The check engine light is also on.

What you are describing sounds like a dirty or failing idle air control valve. The idle air control valve (https://www.yourmechanic.com/services/idle-control-valve-replacement) monitors the air intake as it is mixed with fuel prior to being injected into the engine at low speeds...

My tail-brake lights are not working, but my top brake light is working, and the taillights are on when the headlights are on

Since the third brake light works your brake light switch is good. This vehicle has a rear brake light out sensor module in the left rear of the trunk that needs to be checked to see if brake signal is...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com