Suzuki SX4 Crossover Windshield Wiper Arm Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(498)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(498)

Windshield Wiper Arm Replacement Service

How much does a Windshield Wiper Arm Replacement cost?

On average, the cost for a Suzuki SX4 Crossover Windshield Wiper Arm Replacement is $199 with $53 for parts and $146 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 Suzuki SX4 CrossoverL4-2.0LService typeWindshield Wiper Arm - Rear ReplacementEstimate$281.83Shop/Dealer Price$304.04 - $380.80
2012 Suzuki SX4 CrossoverL4-2.0LService typeWindshield Wiper Arm - Driver Side Front ReplacementEstimate$430.83Shop/Dealer Price$492.31 - $682.33
2012 Suzuki SX4 CrossoverL4-2.0LService typeWindshield Wiper Arm - Passenger Side Front ReplacementEstimate$387.03Shop/Dealer Price$441.17 - $609.48
Show example Suzuki SX4 Crossover Windshield Wiper Arm Replacement prices

What is the Windshield Wiper Arm all about?

The windshield wiper system is designed to keep the windshield clear in rain, snow, or when dirt and debris obstruct your view. When the windshield wiper switch is turned on, power goes to the windshield wiper motor and transmission. Linkage attaches the windshield wiper transmission to the wiper arms. The windshield wiper transmission causes the windshield wiper arms to move in a side-to-side motion against the windshield or back window to keep it clear and clean. When the windshield wipers aren’t touching the window, the wipers chatter continuously against the window when they are turned on, or the windshield wiper moves but the one or both of the wiper arms stay put, it may be time to replace your windshield wiper arms.

Keep in mind:

  • Install new wiper blades any time a windshield wiper arm is replaced.
  • Replace both windshield wiper arms at the same time.

How it's done:

  • The hood is opened and supported as needed. The wipers are put into the park position (the position where the wipers rest when not in use) before removal of the wiper arm. The position is noted by a small grease marker mark on the windshield.

  • The old wiper arm is removed from the vehicle.

  • The new wiper arm is installed and aligned with the mark on the window. Any marks are removed from the window using glass cleaner.

  • The hood is closed as required and the wipers are tested for proper operation.

  • The windshield wipers are tested for proper operation with a hose running water on the window.

Our recommendation:

The windshield wiper arms are responsible for keeping your windshield clear and maintaining your road visibility. If you can’t see the road properly because your wipers aren’t working well, schedule an inspection.

What common symptoms indicate you may need to replace the Windshield Wiper Arm?

  • Wiper blades streak
  • Wipers chatter when going back and forth
  • One or both wiper blades don’t move when turned on
  • Wiper blade doesn’t touch the window when swiping

How important is this service?

Being able to clearly see your way down the road is one of the most important factors in driving. If your wipers aren’t working properly, get the system checked right away.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(498)

Rating Summary
468
21
1
2
6
468
21
1
2
6

Xavier

12 years of experience
29 reviews
Xavier
12 years of experience
Suzuki Grand Vitara V6-2.7L - Car is not starting - Plano, Texas
Very professional and detailed service!

Elias

15 years of experience
225 reviews
Elias
15 years of experience
Suzuki SX4 L4-2.0L - Oxygen Sensor Replacement (Front/Upper/Upstream, Rear/Lower/Downstream) - Bronx, New York
Amazing Mechanic !!! would definitely recommend to anyone and extremely professional and helpful with explaining and not bothered if you watch him work ! Thanks again Eliass !

Peter

29 years of experience
592 reviews
Peter
29 years of experience
Suzuki Grand Vitara V6-2.5L - Valve Cover Gasket - Burbank, California
Excellent

Angel

18 years of experience
106 reviews
Angel
18 years of experience
Suzuki Forenza L4-2.0L - Brake Pads Replacement (Front) - Miami, Florida
Great service for good price

Excellent Rating

(498)

Rating Summary
468
21
1
2
6
468
21
1
2
6
Number of Suzuki services completed
5478+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

How Long Do Brake Pads Last?
How How long can brake pads last? Brake pads last from 25,000 miles to 70,000 miles depending on their design and material. Brake pads are part of the braking system of every vehicle. Designed to handle high friction, when the...
P2290 OBD-II Trouble Code: Injector Control Pressure Too Low
What the P2290 code means? P2290 is an OBD-II generic code for the engine control module (ECM) detecting the injector control pressure...
Is it Safe to Drive With a Nail in My Tire?
The tire is a circular shaped piece of rubber that covers the wheel and enables the vehicle to drive, and...

Some times i turn the key and it starts up like normal but then shuts off after 1 second

You will need to check the purge control valve on the firewall near brake master cylinder. The purge valve may be letting too much vapor into the intake causing the stall (https://www.yourmechanic.com/services/car-is-stalling-inspection) or hard start. There also may be an...

Starting problems - 2001 Ford Expedition

Hey there. You should have the fuel pressure checked to see if the pressure does not drop after you turn off the vehicle. If it does, then have the pressure regulator replaced (https://www.yourmechanic.com/services/fuel-pressure-regulator-replacement) for not holding pressure. If the pressure...

Hello my 2012 Buick lacrose service battery charging system light is coming on

If an engine fault causes enough loss in RPM at idle, the charging system warning light could come on. Another possibility is the charging system and/or battery are faulty and thus there is inadequate power to run the ignition system,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com