Suzuki Reno Wheel Stud Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(16)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(16)

Wheel Stud Replacement Service

How much does a Wheel Stud Replacement cost?

On average, the cost for a Suzuki Reno Wheel Stud Replacement is $155 with $60 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Suzuki RenoL4-2.0LService typeWheel Stud - Driver Side Front ReplacementEstimate$235.69Shop/Dealer Price$275.87 - $373.89
2007 Suzuki RenoL4-2.0LService typeWheel Stud - Passenger Side Front ReplacementEstimate$215.69Shop/Dealer Price$255.88 - $353.92
2006 Suzuki RenoL4-2.0LService typeWheel Stud - Passenger Side Rear ReplacementEstimate$214.59Shop/Dealer Price$254.51 - $351.72
2005 Suzuki RenoL4-2.0LService typeWheel Stud - Passenger Side Rear ReplacementEstimate$214.59Shop/Dealer Price$254.49 - $351.68
2005 Suzuki RenoL4-2.0LService typeWheel Stud - Driver Side Front ReplacementEstimate$215.69Shop/Dealer Price$255.90 - $353.95
2008 Suzuki RenoL4-2.0LService typeWheel Stud - Passenger Side Rear ReplacementEstimate$214.59Shop/Dealer Price$254.51 - $351.72
2006 Suzuki RenoL4-2.0LService typeWheel Stud - Driver Side Front ReplacementEstimate$220.69Shop/Dealer Price$260.75 - $358.68
2008 Suzuki RenoL4-2.0LService typeWheel Stud - Driver Side Rear ReplacementEstimate$219.59Shop/Dealer Price$259.74 - $357.14
Show example Suzuki Reno Wheel Stud Replacement prices

What are wheel studs and how do they work?

Wheel studs are high-strength, threaded steel fasteners that securely hold the wheel and tire assembly to the axle hub. Typically, there are 4 to 6 studs per wheel pressed or threaded into the wheel hub. The wheel and tire assembly is mounted on the hub centering ring and the studs protrude from the hub through the wheel mounting holes. Lug nuts are threaded onto the studs to securely hold the wheel to the hub.

When to consider replacing wheel studs:

  • Wheel is loose or wobbling. The wheel and tire assembly must be held evenly and securely to the wheel hub by the lug nuts attached to the studs. If the lug nuts are not tightened securely, it can cause the wheel to vibrate, loosen and wobble, which can damage or even break the wheel studs and lug nuts, potentially causing the wheel to separate from the vehicle.
  • Missing or broken studs, or damaged threads. If the stud is missing or broken, the lug nut attached to the stud will be missing and the wheel will hold securely. When the threads on the stud are worn, rusted away, or otherwise damaged, the lug nut may not achieve the required torque and could come loose while driving.
  • Stud turns in place when fastening lug nut. When the stud spins in the wheel hub while tightening, it should be replaced. During replacement, the mounting hole in the wheel hub should be inspected for damage.

How do mechanics replace wheel studs?

  • The car is raised and supported on steel jack stands.
  • The wheel and tire assembly, brake rotor, and caliper are removed.
  • On vehicles where there is sufficient access at the back of the wheel hub, a compact tool is used to press the defective stud out of the hub.
  • On vehicles where there is no access to use a compact stud remover, the wheel hub must be removed. When the hub must be pressed out of the steering knuckle, the wheel bearing is typically replaced in the process of removing the hub. Sometimes, the entire hub and bearing assembly with the studs included can be replaced.
  • The new stud or studs are pressed into position from the back of the hub, the brake caliper and rotor are reinstalled, and the wheel is placed onto the studs.
  • The wheel lug nuts are tightened to the factory specifications.

Is it safe to drive with wheel stud problems?

No, but you can temporarily drive a vehicle at low speeds and for short trips with one missing wheel stud. However, if more than two studs are broken, it is recommended to repair the car prior to further use. Having all wheel studs in place with evenly tightened lug nuts prevents distortion of the brake rotor. Over longer periods, missing studs can damage the brake rotor, the wheel, and the remaining studs. A car may vibrate when driving with missing wheel studs and can cause the other studs or lug nuts to loosen. This can lead to the wheel separating from your tire while driving.

When replacing wheel studs keep in mind:

  • Wheel studs are made of high-strength steel. If a stud has broken, it is typically due to previous overtightening. Lug nuts should be tightened using a calibrated torque wrench or a torque limiting device.
  • Published torque values assume that studs are dry, clean, and free of all lubricants. Oil, grease, anti-seize or any similar compound should not be applied to the threads of a wheel stud or lug nut.
  • Should a vehicle require removal of the wheel hub to add a new wheel stud, studs on the hub should be replaced. However, only defective studs need to be replaced if there is access from the back of the hub.
  • Lug nuts should be tightened in a star or crisscross pattern specified by the original equipment manufacturer in order to avoid warping of the brake rotor or drum as well as damaging the wheel.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(16)

Rating Summary
16
0
0
0
0
16
0
0
0
0

Joel

21 years of experience
987 reviews
Joel
21 years of experience
Suzuki Reno L4-2.0L - Radiator - Jacksonville, Florida
Joel was wonderful! He was polite, showed up on time, was done in the time range I was given. He not only fixed the problem but also topped off my other fluids. Using him for my future repairs and my boyfriend's truck as well.

John

24 years of experience
55 reviews
John
24 years of experience
Suzuki Reno L4-2.0L - Timing Belt - Philadelphia, Pennsylvania
John arrived ontime, and made all repairs in a timely manner. Will use again!!!!!!

Breck

20 years of experience
681 reviews
Breck
20 years of experience
Suzuki Reno L4-2.0L - Fuel Injector - Houston, Texas
Very professional

Ben

41 years of experience
1416 reviews
Ben
41 years of experience
Suzuki Reno L4-2.0L - Exhaust Gas Recirculation/EGR Valve Replacement - Houston, Texas
Ben has performed several services on my vehicle. He is always professional, knowledgeable & friendly.

Excellent Rating

(16)

Rating Summary
16
0
0
0
0
16
0
0
0
0
Number of Suzuki Reno services completed
176+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Buick Verano
The The 2012 Buick Verano is a near luxury sedan that is affordably priced with lots of technology and comfort that comes standard. The interior is covered in leather with a rich variety of colors. The legroom in the front...
Symptoms of a Bad or Failing AC Air Filter
Common signs of a clogged AC air filter include reduced airflow from AC vents, less power coming from the engine, and increased dust in the cabin.
New Hampshire Parking Laws: Understanding the Basics
Drivers Drivers in New Hampshire need to know more than just the rules and laws of driving on the road. They also need to understand the parking laws so they know where they can and cannot park. Failure to adhere...

Car is stalling heavily, check engine light on, scanner shows P0101 MAF

Generally, the mass air flow sensor code will register either when it is dirty or when it is failing for other reasons such as lack of proper voltage or connection. The mass air flow sensor is a unit in the...

Loss in boost pressure.

Check the wastegate on the turbo and see if its causing the turbo to drop off the pressure. The tube from the turbo to the wastegate could be leaking and causing the pressure to be lost. If you need further...

had to make a sudden stop and now car makes a clicking sound when step on brakes

Hi there. The clicking sound you hear when braking might be a worn suspension component and not related to the brakes. Sway bar links for example can make clicking sounds when the bushings are worn. If ball joints are worn,...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com