Suzuki Forenza Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(110)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(110)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Suzuki Forenza Power Steering Pump Replacement is $1047 with $893 for parts and $154 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Suzuki ForenzaL4-2.0LService typePower Steering Pump ReplacementEstimate$1957.02Shop/Dealer Price$2407.61 - $3750.47
2007 Suzuki ForenzaL4-2.0LService typePower Steering Pump ReplacementEstimate$1947.11Shop/Dealer Price$2395.76 - $3737.16
2004 Suzuki ForenzaL4-2.0LService typePower Steering Pump ReplacementEstimate$1947.11Shop/Dealer Price$2395.78 - $3737.21
2008 Suzuki ForenzaL4-2.0LService typePower Steering Pump ReplacementEstimate$1947.11Shop/Dealer Price$2395.78 - $3737.20
2005 Suzuki ForenzaL4-2.0LService typePower Steering Pump ReplacementEstimate$1947.11Shop/Dealer Price$2397.40 - $3740.04
Show example Suzuki Forenza Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(110)

Rating Summary
103
3
0
1
3
103
3
0
1
3

Jeffrey

28 years of experience
870 reviews
Jeffrey
28 years of experience
Suzuki Forenza L4-2.0L - Spark Plugs - Rock Hill, South Carolina
Polite and professional.

Johnathon

10 years of experience
171 reviews
Johnathon
10 years of experience
Suzuki Forenza L4-2.0L - Oil Change - Fresno, California
Professional good customer service

Phillip

18 years of experience
85 reviews
Phillip
18 years of experience
Suzuki Forenza L4-2.0L - Serpentine/Drive Belt - San Antonio, Texas
Car runs like new! Great job!

Harish

28 years of experience
588 reviews
Harish
28 years of experience
Suzuki Forenza L4-2.0L - Car Starter Repair - Charlotte, North Carolina
Very friendly, arrived on time, completed job in timely manner. will definitely use again.

Excellent Rating

(110)

Rating Summary
103
3
0
1
3
103
3
0
1
3
Number of Suzuki Forenza services completed
1210+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Fuel Filter
Fuel Fuel filters can be considered the final defense to block particles that may be in the fuel from reaching and damaging the engine. Both high-pressure fuel injected systems with either diesel or gas fuel can all have additives or...
Symptoms of a Bad or Failing Condenser Fan Relay
If your car's AC is blowing hot air or its engine is overheating, you may have to replace the condenser fan relay.
How Long Does an Exterior Door Handle Last?
No No matter what make or model vehicle you drive, it has door handles. You have a door handle located on the inside of your car, as well as the outside. While we don’t often think of this as a...

How do you use the remote to open the windows?

Your windows can be opened in a number of ways – you can use the power window switch, or you can use the manual key in the driver side door lock. You can also use the remote to open your...

shake around 45-50 mph 2006 Honda Odyssey

Hi there, thanks for writing in about your 2006 Honda Odyssey. Try to drive your vehicle in 3rd gear without overdrive on and see if problem goes away. The problem is at the speed where the lockup torque converter locks....

Exhaust Manifold Hot/Exhaust Leak

Hello. To say that they catalytic converter is good or bad is impossible without having the car here. If the manifold is heating up, and the catalytic convert has failed, you will see bigger signs of failure in the near...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com