Suzuki Esteem Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(14)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(14)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Suzuki Esteem Intake Manifold Gaskets Replacement is $305 with $95 for parts and $210 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1998 Suzuki EsteemL4-1.6LService typeIntake Manifold Gaskets ReplacementEstimate$450.74Shop/Dealer Price$510.70 - $678.43
1999 Suzuki EsteemL4-1.8LService typeIntake Manifold Gaskets ReplacementEstimate$584.59Shop/Dealer Price$637.15 - $783.68
2001 Suzuki EsteemL4-1.6LService typeIntake Manifold Gaskets ReplacementEstimate$430.23Shop/Dealer Price$485.82 - $646.35
2002 Suzuki EsteemL4-1.8LService typeIntake Manifold Gaskets ReplacementEstimate$584.59Shop/Dealer Price$637.21 - $783.79
2000 Suzuki EsteemL4-1.6LService typeIntake Manifold Gaskets ReplacementEstimate$437.23Shop/Dealer Price$496.78 - $664.21
1995 Suzuki EsteemL4-1.6LService typeIntake Manifold Gaskets ReplacementEstimate$437.23Shop/Dealer Price$494.78 - $660.71
1999 Suzuki EsteemL4-1.6LService typeIntake Manifold Gaskets ReplacementEstimate$437.23Shop/Dealer Price$494.60 - $660.38
1996 Suzuki EsteemL4-1.6LService typeIntake Manifold Gaskets ReplacementEstimate$437.23Shop/Dealer Price$494.57 - $660.34
Show example Suzuki Esteem Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(14)

Rating Summary
13
1
0
0
0
13
1
0
0
0

John

11 years of experience
94 reviews
John
11 years of experience
Suzuki Esteem L4-1.8L - Axle / CV Shaft Assembly Replacement (Driver Side Front, Passenger Side Front) - San Diego, California
John was very professional and knowledgeable. He fixed my car in a timely manner. I feel like I can trust him and this company for future repairs. Thank you so much. I'm excited to tell my friends and family!

Jose

18 years of experience
433 reviews
Jose
18 years of experience
Suzuki Esteem L4-1.8L - Alternator - Portland, Oregon
Jose is a very friendly auto mechanic and a gentleman. He was careful to explain everything to me so I understood everything he was doing. I highly recommend Jose.

Devin

9 years of experience
15 reviews
Devin
9 years of experience
Suzuki Esteem L4-1.8L - Alternator Repair - Lake Wales, Florida
Arrived early and got the it fixed fast. No more bumming rides to work!

Scott

39 years of experience
607 reviews
Scott
39 years of experience
Suzuki Esteem L4-1.8L - Battery - Westminster, Colorado
scott is a very nice and knowledgable man told me everything I needed to know. want to use him again

Excellent Rating

(14)

Rating Summary
13
1
0
0
0
13
1
0
0
0
Number of Suzuki Esteem services completed
154+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

P0821 OBD-II Trouble Code: Gear Lever X Position Circuit
P0821 code means that a defect in the transmission shift mechanism range circuit has been detected due to a failed sensor or a locked solenoid.
Symptoms of a Bad or Failing Ignition Lock Assembly
If your key is stuck in the ignition, won't go in, or can't start the car, you may need to replace the ignition lock assembly.
How to Use GPS in Your Car
An An in-car navigation device, or Global Positioning System GPS (https://www.yourmechanic.com/article/3-essential-things-to-know-about-your-car-s-gps) device, helps you find your way to various destinations. In addition to guiding you on the streets and highways, newer GPS models also give you the ability to search...

My instrument cluster is not telling me my speed and mileage

It sounds like your speed sensor (https://www.yourmechanic.com/services/speed-sensor-replacement) on the back of the transmission has failed. I would certainly recommend having it professionally tested to verify this diagnosis but this is the most likely cause. If the gauge cluster is still...

Rough idle when electrical is used

Hi there. As electrical components and accessories are used, more draw and strain is placed on the motor to power the alternator. As such, existing small idle problems will be accelerated when the engine is asked to give more. In...

I can't adjust the height of the driver's seat in my Honda Clarity. Nothing happens when I pull up on the large lever.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com