Suzuki Aerio Car will not turn over Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(33)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(33)

Car will not turn over Inspection Service

How much does a Car will not turn over Inspection cost?

On average, the cost for a Suzuki Aerio Car will not turn over Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2003 Suzuki AerioL4-2.0LService typeCar will not turn over InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2004 Suzuki AerioL4-2.3LService typeCar will not turn over InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2006 Suzuki AerioL4-2.3LService typeCar will not turn over InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2005 Suzuki AerioL4-2.3LService typeCar will not turn over InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2002 Suzuki AerioL4-2.0LService typeCar will not turn over InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2007 Suzuki AerioL4-2.3LService typeCar will not turn over InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Suzuki Aerio Car will not turn over Inspection prices

Generally, when you turn the key to “run” position, the engine cranks (turns over), and starts running. You’re then free to put the transmission in gear and drive. If your car won’t turn over, it means you’re stranded wherever you were when it broke down. There are several potential causes for this problem as well.

How this system works:

Any situation in which your car won’t turn over involves your ignition system. There’s a problem somewhere in there, but quite a few components play a significant role, so there will have to be some narrowing down of the options to determine what’s causing the problem.

When you turn the key in your ignition, several things happen. First, the battery sends voltage to the starter, the spark plugs and the main relay. The starter is what’s responsible for turning the engine over initially. The spark plugs create the spark needed to ignite gasoline vapor. The main relay turns on the fuel pump, which sends gasoline from the tank to the engine.

If there’s a problem with any one of these components, then your car may not turn over. Depending on the problem, you may hear nothing but a clicking noise when you turn the key, or you may hear the engine trying to turn over, but not quite managing it.

Common reasons for this to happen:

  • Dead Battery: The single most common reason for a no start condition is a dead battery. If the battery is dead, then no voltage can be sent to the other components, including the starter. The battery may have a bad cell, or there could be a parasitic drain that’s causing the issue.

  • Failed Starter: While rarer than a dead battery, starters can and do fail. They’re considered a high-wear component, and you’ll eventually need to replace yours. The most common issue with starters is the solenoid, but it can also be a problem with the Bendix or even the wiring.

  • Bad Alternator: If the alternator isn’t charging the battery, then supplying the electricity needed to run your engine and accessories will drain the battery’s charge. The engine might stall out while you’re driving, or it might not crank the next time you get in.

  • Failed Main Relay: It’s entirely possible that your battery, starter and alternator are fine, and the problem is actually a failed main relay. If this happens, the fuel pump will not kick on when you turn the ignition to “run”.

What to expect:

One of our highly trained mechanics will come to your home or office to inspect your ignition system, including the battery, starter, alternator, main relay and other components. The mechanic will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will first inspect the battery, and then move on to testing other components in the system, including the alternator, the starter and the main relay. It may be necessary to charge or replace the battery before further diagnostics can be completed.

How important is this service?

If your car won’t turn over, you’re dead in the water. It’s a tough place to be, particularly if you weren’t at home when the problem happened. The most important defense against this condition is to have your charging system regularly inspected. This will test the battery, starter and alternator, and alert you to potential problems before they become serious issues. One of our professional mechanics can inspect your car and repair your no start problem.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(33)

Rating Summary
28
5
0
0
0
28
5
0
0
0

Junard

11 years of experience
161 reviews
Junard
11 years of experience
Suzuki Aerio L4-2.3L - Axle / CV Shaft Assembly Replacement (Passenger Side Front) - Maple Shade, New Jersey
Pleasant professional

Dan

39 years of experience
994 reviews
Dan
39 years of experience
Suzuki Aerio L4-2.0L - Ignition key does not turn - Snellville, Georgia
My overall experience with my mechanic was really good

H

26 years of experience
828 reviews
H
26 years of experience
Suzuki Aerio L4-2.0L - Starter - Atherton, California
Great service Job well done

Carlo

14 years of experience
80 reviews
Carlo
14 years of experience
Suzuki Aerio L4-2.3L - Oil Change - Austin, Texas

Excellent Rating

(33)

Rating Summary
28
5
0
0
0
28
5
0
0
0
Number of Suzuki Aerio services completed
363+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 Chevrolet Volt
Whether Whether you’re concerned about the environment or just want a vehicle that allows you to use less gas, the 2012 Chevrolet Volt might be just right for you. Designed to run entirely via an electric current, this electric hybrid...
How to Replace a Lost or Stolen Car Title in New Mexico
When When it comes to your vehicle one of the most important, if not the most important document you need to keep track of is your car title. This title is what proves you are the registered owner. This makes...
Child Seat Safety Laws in Connecticut
Every Every state has laws in place regarding the ways in which drivers and passengers have to be secured in motor vehicles. Every state requires that the driver and front seat passengers wear seatbelts. The requirements on seat belt use...

Car makes popping noise

Hello. The vehicles cruise control system uses an actuator and cable to open the throttle body and hold cruise. The throttle cable and cruise control cable operate independently, but are both linked to the throttle body. Have an experienced technician...

Shifting has become much harder, especially 1st gear and reverse, and sometimes I can't shift into any gear.

Hi. Usually when a manual transmission is hard to shift, it means that the slave cylinder is malfunctioning and needs to be replaced. The purpose of the slave cylinder is to make shifting of the transmission smooth and effortless for...

I just bought a 05 Impala v6 automatic. It's very used, and when I first started driving it, I did notice that the shifting felt like it was slipping. Also, the gear shirt bar that moves the lever is in bad shape. It was having a difficult time getting into 4th gear on the freeway drive home, so I used cruise control, thinking that would take some pressure off of the transmission. I don't know if that's relevant, just saying everything. I got off the freeway and stopped at a light . The car wouldn't move. I tried push starting it in neutral like you would a manual, apparently autos don't do that ( I really really hate auto trans and I don't know anything about them as a result). Then I turned the car off and started it up again. It drove for about 1/16 of a mile at about 4000 RPMs. I did that about 5 times til I just got home. I do have a quart of trans fluid and I was going to try flushing that, but it doesn't seem as simple as just slipping.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com