Suzuki Aerio Car is not getting enough power Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(32)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(32)

Car is not getting enough power Inspection Service

How much does a Car is not getting enough power Inspection cost?

On average, the cost for a Suzuki Aerio Car is not getting enough power Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2007 Suzuki AerioL4-2.3LService typeCar is not getting enough power InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2003 Suzuki AerioL4-2.0LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2002 Suzuki AerioL4-2.0LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
2005 Suzuki AerioL4-2.3LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
2004 Suzuki AerioL4-2.3LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.02 - $112.55
2006 Suzuki AerioL4-2.3LService typeCar is not getting enough power InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Suzuki Aerio Car is not getting enough power Inspection prices

When a vehicle seems to lose power, or is not getting enough power when you stomp down on the gas pedal it is not only annoying, it can be dangerous. Pulling out onto a highway or across a busy intersection, only to have the vehicle hesitate or stall can lead to a perilous situation.

In most cases a lack of power can be traced back to a fuel system malfunction. Issues can range from a leaking fuel line to a bad fuel pump. Regardless of the cause, an engine that is not getting enough power should be serviced immediately.

How this system works:

The fuel system supplies fuel to the engine. The combustion chamber is where fuel is mixed with air, atomized and then ignited. Fuel systems vary depending on the vehicle but they all have the same basic components.

Fuel is stored in the gas tank and a fuel pump pushes fuel through the fuel lines to a fuel filter and then into the fuel injectors. On older vehicles the fuel is delivered to the carburetor and throttle body injection system. The fuel injectors spray fuel into the cylinder where it mixes with air and ignites during compression. The resulting explosion drives the pistons.

Common reasons for this to happen:

  • Defective Fuel Pump or Filter: The fuel pump supplies the engine with fuel and if it malfunctioning the car will experience a loss of power. Over time fuel pumps can wear out or become clogged with contaminants, which prevents it from pushing fuel to the injectors. This can cause the vehicle to sputter at high speeds, stall, or hesitate during acceleration. A clogged fuel filter can also cause these problems. Fuel filters should be changed on a regular schedule.

  • Clogged or Bad Fuel Injector: Like a fuel pump, injectors can become clogged due to fuel contaminates, hydrocarbons and additives. A clogged injector will degrade performance and the engine will feel like it is not getting enough power. It can also make the vehicle hard to start, idle roughly and effect fuel consumption.

  • Leaking Fuel Line: A leaking fuel line will not provide enough fuel to the injectors, which can result in a lack of power. If there is a strong smell of fuel in the cabin of the car or a puddle of fuel underneath the vehicle a fuel line issue is usually the problem. This should be addressed immediately.

  • Vacuum Leak: A vacuum leak can affect the computers ability to properly regulate the fuel to air ratio, which can cause a lack of power. In most cases, a vacuum leak will trigger the Check Engine light to come on.

  • Dirty Airflow Sensor: An airflow sensor detects the mass of air that is entering the fuel injection system and passes that information to the engine’s computer so it can correctly deliver the right amount of fuel. A failing or dirty airflow sensor will send the wrong signals to the computer. A lack of power during acceleration is a common symptom. This problem will also trigger a Check Engine light.

Clogged Catalytic Converter: If your catalytic convertor is clogged or starting to fail it can prevent the proper flow of air through the engine. This can lead to a loss of power. The vehicle will also run hotter than usual.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the lack of power, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A vehicle that is not getting enough power should be inspected as soon as possible. It can be dangerous to drive, and fuel system problems that are not fixed can often lead to more expensive repairs as more components are affected.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Suzuki mechanics

Real customer reviews from Suzuki owners like you.

Excellent Rating

(32)

Rating Summary
27
5
0
0
0
27
5
0
0
0

Chad

35 years of experience
2 reviews
Chad
35 years of experience
Suzuki Aerio L4-2.3L - Axle / CV Shaft Assembly Replacement (Driver Side Front) - Orlando, Florida
Exceptional service, knowledge and experience. Will definitely use again.

Alexis

30 years of experience
94 reviews
Alexis
30 years of experience
Suzuki Aerio L4-2.0L - Car is not starting - Hialeah, Florida
Alexis was professional in provide answers to any question that I may have as well as a talking through any issue discovered so I could gain full understanding of the issue with my car and preventive measure or recommendations for alternatives option I can take. Truly helpful and the embodiment of a role model for all mechanic as trustworthy as a private primary care doctor would be to you instead with your car.

Alfred

13 years of experience
505 reviews
Alfred
13 years of experience
Suzuki Aerio L4-2.0L - Oil Change - San Francisco, California
Alfred did a GREAT job!

Robert

15 years of experience
17 reviews
Robert
15 years of experience
Suzuki Aerio L4-2.3L - Brake Pads Replacement (Front) - North Fort Myers, Florida
Robert was on time, respectful, helpful, very efficient and great attitude. I would recommend him to anyone in my experience.

Excellent Rating

(32)

Rating Summary
27
5
0
0
0
27
5
0
0
0
Number of Suzuki Aerio services completed
352+
services done by our mechanics
TOTAL NUMBER OF EXPERT Suzuki MECHANICS
300+
experts on our platform

Recent articles & questions

What Essentials Do I Need to Keep in My Car?
Many Many of us think of “car essentials” as those items we always keep stocked in our center consoles and door pockets, like chapstick, napkins, and phone chargers. But there are a few other items you shouldn’t leave home without,...
P0483 OBD-II Trouble Code: Cooling Fan Rationality Check Malfunction
P0483 code means that the cooling fan has been commanded to turn on or off, but the voltage reading indicates that the fan did not respond.
The Guide To Colored Curb Zones in Oklahoma
Oklahoma Oklahoma parking law: understanding the basics The parking laws in Oklahoma are in place to help keep people safe and to ensure that traffic is able to flow properly. People who park incorrectly or in locations that are dangerous...

I have a 2000 Toyota Corolla. I keep losing oil and it's not leaking on the ground. I changed the spark plugs and found oil on the

Hello, thank you for writing in. While there are several pathways for oil to get to the spark plugs, the most common is the valve cover gasket, and the o-rings located in the spark plug wells. One or both of...

Car won't start replaced timing belt cam shaft and crank sensors still get p0335 amen p0340 code

The codes suggest an electrical (wiring) and or sensor fault. A real time scanner can graph sensor function on cranking and you can obtain that diagnostic if you request a check engine light diagnostic (https://www.yourmechanic.com/services/check-engine-light-is-on-inspection). P0335 (https://www.yourmechanic.com/article/p0335-obd-ii-trouble-code-crankshaft-position-sensor-a-circuit-malfunction-by-spencer-clayton) can set if...

Crankshaft and camshaft position sensor circuit malfunction

The 335 and 340 codes are for crankshaft and camshaft circuits. This could be bad sensors, or it could be an issue in the wiring to the sensors. The 421 is for a catalyst performance. It can come up because...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com