Subaru Crosstrek Car Battery Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Car Battery Replacement Service

How much does a Car Battery Replacement cost?

On average, the cost for a Subaru Crosstrek Car Battery Replacement is $291 with $151 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Subaru CrosstrekH4-2.0LService typeCar Battery ReplacementEstimate$456.02Shop/Dealer Price$534.88 - $763.34
2023 Subaru CrosstrekH4-2.0LService typeCar Battery ReplacementEstimate$745.99Shop/Dealer Price$897.82 - $1349.20
2016 Subaru CrosstrekH4-2.0LService typeCar Battery ReplacementEstimate$447.01Shop/Dealer Price$524.12 - $751.28
2023 Subaru CrosstrekH4-2.5LService typeCar Battery ReplacementEstimate$745.99Shop/Dealer Price$897.85 - $1349.24
2024 Subaru CrosstrekH4-2.5LService typeCar Battery ReplacementEstimate$745.99Shop/Dealer Price$899.32 - $1351.82
2016 Subaru CrosstrekH4-2.0L HybridService typeCar Battery ReplacementEstimate$447.01Shop/Dealer Price$524.26 - $751.53
2022 Subaru CrosstrekH4-2.5LService typeCar Battery ReplacementEstimate$745.99Shop/Dealer Price$897.86 - $1349.27
2024 Subaru CrosstrekH4-2.0LService typeCar Battery ReplacementEstimate$745.99Shop/Dealer Price$897.85 - $1349.24
Show example Subaru Crosstrek Car Battery Replacement prices

What are car batteries and how do they work?

A car battery is an energy storage device that relies on a chemical reaction within the battery to produce electricity. The stored electrical energy is used to initially operate the starter motor, ignition system, and fuel system on your vehicle. Once your car engine is running, the alternator supplies the electricity needed for all vehicle systems and charges the battery to replace the electric energy used when starting a car.

Most electric vehicles have a traction battery which is in addition to the standard 12 volt battery that is used to start the car engine. Traction batteries also convert chemical energy to supply electrical energy but operate at higher voltages and often are monitored by the PCM (Powertrain Control Module).

Battery

When to replace a car battery?

  • Your car doesn’t start. A new battery has a specified capacity to provide power. This capacity is referred to as the cranking amps rating of the battery. As a battery ages, the actual amps that a battery can supply becomes lower than its original rating Once the cranking amps fall below a critical threshold, it will be difficult or impossible to start your car.
  • Battery or charging system warning light is illuminated. Should a battery or charging system warning light illuminate, a mechanic should perform a few basic tests to determine if a battery replacement is needed.
  • Electrical components don’t work. Once a battery has started to fail, and the voltage produced by the battery drops, then vehicle electrical components can malfunction, such as the security system. If you are experiencing electrical malfunctions, it’s a smart idea to have the battery tested.

How do mechanics replace the battery?

  • A temporary power source might be installed to avoid the possibility of losing radio presets or stored data in the PCM while the battery is out. When the battery is already completely dead, this step is unnecessary.
  • The vehicle’s negative cable is removed from the battery, followed by the positive cable. The battery tie down system is loosened and the old battery removed.
  • Cable ends and wiring are carefully inspected to ensure cleanliness and no corrosion. In some cases, corrosion can be extreme and the cable may need to be replaced or wiring repaired.
  • The new battery is installed and the tie down system is reinstalled. Anti-corrosion compound is applied to the battery terminals. The positive terminal is reconnected followed by the negative terminal.
  • Some vehicles, for example some models of BMW, VW, and Audi, may require PCM programming to input battery parameters. This step, performed using a specialized scan tool, is necessary to maximize battery life and prevent electrical system malfunctions.
  • The car is started and charging system output is measured and compared against the factory OEM specification to ensure that the new battery will properly recharge. Generally, charging output will be in the range of 13.8 to 14.8 volts but the exact specifications vary by make and model.

Is it safe to drive with a battery problem?

Yes, but if you have a weak battery you might be left stranded somewhere if the battery dies completely and you cannot start your car. A faulty battery may also needlessly overload the alternator and could adversely affect the operation of the vehicle’s electrical system, including the vehicle security system and the shift interlock.

When replacing the battery keep in mind:

  • The quality of the electrical connections to the battery posts is important. Connections must be clean, free of corrosion and properly tightened.
  • Batteries store a large amount of energy and if short-circuited a battery could explode and can create intense discharges that can damage your eyesight. Insulated tools should be used to attach cabling to battery terminals. Otherwise, the battery’s positive cable can be shorted to ground or the positive and negative posts can be directly shorted. Batteries can only be safely installed from a positive terminal to positive wiring and from a negative terminal to body ground. If the polarity is reversed damage will likely occur to the vehicle’s electrical system.
  • Generally, a car battery will have a service life of 4 to 7 years. If a load test on a battery reveals a significant reduction in the capacity of the battery to provide power, you should buy a new battery rather than wait for the old battery to fail completely.
  • Batteries should only be disconnected if the engine is off and the alternator is not running. Disconnecting a car battery while the alternator is running can cause a voltage spike that will damage sensitive electronic components in the vehicle, such as the PCM.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Subaru mechanics

Real customer reviews from Subaru owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Maurice

20 years of experience
39 reviews
Maurice
20 years of experience
Crosstrek 2016 - Battery - Mount Pleasant, SC
Arrived on time and was very professional. Will recommend and use again.

Darnell

19 years of experience
5 reviews
Darnell
19 years of experience
Forester 1998 - Starter - Los Angeles, CA
Darnell was very professional and helpful! He broke everything down and leveled with me, which I really appreciate. Can’t recommend him enough!!

Derrick

20 years of experience
16 reviews
Derrick
20 years of experience
Forester 2017 - Oil Change - Brooklyn, NY
Superb experience!

Marko

5 years of experience
21 reviews
Marko
5 years of experience
XV Crosstrek 2015 - Oil Change - San Diego, CA
2nd appt with Marko, great work as always

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Subaru Crosstrek Car Battery Replacement services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Subaru MECHANICS
800+
experts on our platform

Recent articles & questions

The Best Used Cars to Buy If You're in a Wheelchair
Being Being in a wheelchair means you have a very specific list of demands, and requests for your vehicle. The main focus is of course how you will get in and out of the vehicle. There are some other aspects...
P0446 OBD-II Trouble Code: Evaporative Emission Control System Vent Control Circuit Malfunction
P0446 code definition P0446 is an OBD2 diagnostic trouble code that indicates a fault within the evaporative emission control system. Other EVAP...
What Is the On-Board Diagnostics (OBD) System?
Your Your car contains a vast number of different systems, all of which must work in harmony to ensure proper operation. There must be a way to monitor your ignition and emissions systems and the On-Board Diagnostics (OBD) is a...

What could cause engine light to come only after driving for about 5 miles.

The check engine light comes on when the computer systems on the vehicle detects a problem. There are hundreds of possible codes and problems that can cause those codes. You will need to have the computer tested to see what...

Are the variable valve timing solenoid and the camshaft sensor the same?

Hello. The variable valve timing and the camshaft position sensor are two separate sensors. The camshaft position sensor is more towards the front of the engine and is a lot easier to replace. The variable valve timing sensor is a...

2011 toyota pruis; code c1391 abnormal leak in accumulator, brake light and abs light on

Hi Andrew. Thanks for sending your question today. Typically this Toyota-specific OBD-II trouble code is due to an internal leak in the actuator circuit and the accumulator circuit. The first step in diagnosing this problem is verifying that there are...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com