Scion xD Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(102)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(102)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Scion xD Intake Manifold Gaskets Replacement is $397 with $103 for parts and $294 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2010 Scion xDL4-1.8LService typeIntake Manifold Gaskets ReplacementEstimate$549.68Shop/Dealer Price$613.29 - $787.09
2009 Scion xDL4-1.8LService typeIntake Manifold Gaskets ReplacementEstimate$530.76Shop/Dealer Price$590.65 - $761.68
2013 Scion xDL4-1.8LService typeIntake Manifold Gaskets ReplacementEstimate$530.76Shop/Dealer Price$590.71 - $761.77
2011 Scion xDL4-1.8LService typeIntake Manifold Gaskets ReplacementEstimate$530.76Shop/Dealer Price$590.70 - $761.77
2012 Scion xDL4-1.8LService typeIntake Manifold Gaskets ReplacementEstimate$530.76Shop/Dealer Price$593.80 - $767.18
2014 Scion xDL4-1.8LService typeIntake Manifold Gaskets ReplacementEstimate$512.42Shop/Dealer Price$568.08 - $725.60
2008 Scion xDL4-1.8LService typeIntake Manifold Gaskets ReplacementEstimate$530.76Shop/Dealer Price$590.74 - $761.82
Show example Scion xD Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Scion mechanics

Real customer reviews from Scion owners like you.

Excellent Rating

(102)

Rating Summary
97
5
0
0
0
97
5
0
0
0

Jesse

11 years of experience
12 reviews
Jesse
11 years of experience
Scion xD L4-1.8L - Serpentine/Drive Belt - Upland, California
Jesse arrived before my appointment time and found my car without any help in my apartment complex. He was kind and professional and got the work done quickly.

Joe

16 years of experience
453 reviews
Joe
16 years of experience
Scion xD L4-1.8L - Loud noises when car is put in gear - Nashville, Tennessee
Super nice guy

Andrew

16 years of experience
657 reviews
Andrew
16 years of experience
Scion xD L4-1.8L - Car is not starting - Portland, Oregon
Andrew is thorough and fast at what he does. He does a good job.

Theodore

17 years of experience
1794 reviews
Theodore
17 years of experience
Scion xD L4-1.8L - Cabin Air Filter - Renton, Washington
Was in time and ready to go

Excellent Rating

(102)

Rating Summary
97
5
0
0
0
97
5
0
0
0
Number of Scion xD services completed
1122+
services done by our mechanics
TOTAL NUMBER OF EXPERT Scion MECHANICS
500+
experts on our platform

Recent articles & questions

How to Keep the Interior of a Convertible Looking Great
Convertible interiors need protection from the weather. Keep the top up and use a sunshade for maximum car interior protection.
P2031 OBD-II Trouble Code: Exhaust Gas Temperature (EGT) Sensor Circuit Bank 1 Sensor 2
P2031 P2031 code definition Exhaust Gas Temperature (EGT) Sensor Circuit Bank 1 Sensor 2 What the P2031 code means P2031 is an OBD-II generic code for when the Engine Control Module (ECM) detects that, during the exhaust gas temperature (EGT)...
P2729 OBD-II Trouble Code: Pressure Control Solenoid E Control Circuit Low
P2729 means a solenoid has malfunctioned due to a failing transmission, faulty sensors or solenoids, low fluid levels or electrical issues

Hole in tire

Hi There, As you may have noticed, depending on the size of the hole in your tire will determine how quickly the air will leak out. I would recommend having a professional from YourMechanic come to your location to replace...

Where is the cam shaft position sensor located on a 2000 ford contour 2.0

Codes do not conclusively identify faulty parts. Any part referred to in a code that is suspected of being faulty must be separately tested, that is diagnosed, in order to determine if in fact there is anything wrong with the...

charge indicator light is on, alternator is charging fine and battery is good. what is the fault

The charging system light may be computer controlled on some vehicles or controlled by the instrument cluster circuit or the alternator output. We would need your vehicle year, make and model with engine size to give a better diagnosis for...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com