Saturn Sky Power Steering Pump Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(53)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(53)

Power Steering Pump Replacement Service

How much does a Power Steering Pump Replacement cost?

On average, the cost for a Saturn Sky Power Steering Pump Replacement is $337 with $197 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2008 Saturn SkyL4-2.4LService typePower Steering Pump ReplacementEstimate$549.22Shop/Dealer Price$651.38 - $949.74
2008 Saturn SkyL4-2.0L TurboService typePower Steering Pump ReplacementEstimate$540.21Shop/Dealer Price$640.60 - $937.64
2010 Saturn SkyL4-2.4LService typePower Steering Pump ReplacementEstimate$540.21Shop/Dealer Price$640.62 - $937.68
2007 Saturn SkyL4-2.4LService typePower Steering Pump ReplacementEstimate$540.21Shop/Dealer Price$640.62 - $937.68
2010 Saturn SkyL4-2.0L TurboService typePower Steering Pump ReplacementEstimate$540.21Shop/Dealer Price$642.10 - $940.26
2007 Saturn SkyL4-2.0L TurboService typePower Steering Pump ReplacementEstimate$540.21Shop/Dealer Price$640.76 - $937.93
2009 Saturn SkyL4-2.4LService typePower Steering Pump ReplacementEstimate$540.21Shop/Dealer Price$640.64 - $937.71
2009 Saturn SkyL4-2.0L TurboService typePower Steering Pump ReplacementEstimate$540.21Shop/Dealer Price$640.62 - $937.68
Show example Saturn Sky Power Steering Pump Replacement prices

What is the power steering pump and how does it work?

The power steering pump is a belt-driven or electric-driven hydraulic pump that generates the hydraulic pressure needed to provide power steering assist. It develops output pressures of 1,000 PSI or more. The pump output is directed to the steering gear, often a rack and pinion type unit, where the hydraulic pressure pushes on the steering rack, greatly reducing the effort it would otherwise take to turn the steering wheel.

Power Steering

When to consider replacing the power steering pump:

  • Groaning or whining noise when turning. Noise can occur if there is wear on the pump bearings or impeller vanes. A low fluid level or trapped air can also cause noises. If the pump has already been operating while dry, adding fluid may not resolve the noise and replacement of the pump might be necessary.
  • Power steering fluid leaks. Leaks can develop at pump seals, threaded connections, hoses, or on the steering rack and pinion unit. Pump seal leaks will generally require a replacement.
  • Difficult steering. Should you notice it is harder to turn the steering wheel, it might mean the power steering pump output pressure is too low, or there could be blockages in the pump or lines.
  • Damage to the pump pulley. Should the pump pulley become damaged or is loose on the pump shaft, you might detect vibration, drive belt damage, or hard steering. Either the pulley will have to be serviced or the pump assembly replaced.

How do mechanics replace the power steering pump?

  • If driven by a drive belt, the power steering pump is bolted to the engine via a bracket that allows for adjustment of the pump drive belt. Once the engine is cold, and safe to work on, the drive belt is removed.
  • If driven by an electric pump, the pump may be mounted in conjunction with the steering shaft or in conjunction with the steering rack. With either a drive belt or electric pump, removal of any dash, panel, or steering components is performed to access the pump.
  • The threaded connectors to the pump inlet and outlet are loosened and removed.
  • Any mounting bolts and brackets are removed so the pump can be removed.
  • If the old pump has failed catastrophically, or there is reason to suspect contaminants in the power steering hoses, the system is flushed.
  • The new pump is bolted on, the pressure and return hoses attached and the system is bled of all air. If pump is belt-driven, it is tightened to the manufacturer’s specification.
  • Finally, the engine is run and the car is road tested to confirm normal steering effort. If a new drive belt was installed, belt tension is measured again, and adjusted as needed, after the belt has run for a few minutes.

Is it safe to drive with a power steering pump problem?

No. If the power steering pump is operated without an adequate amount of fluid, and the pump reservoir will not hold fluid due to a large leak. The pump could seize, which would snap the serpentine belt and likely leave you stranded. If the pump turns and there is adequate fluid, but there is no power assist, it will require much greater effort to turn the steering wheel, and that presents inherent safety risks. Generally, the wisest course is to seek immediate repairs if you suspect a problem with any component in your car’s power steering system.

When replacing the power steering pump keep in mind:

  • Any belts driving the pump should be inspected and replaced as needed. The pump will only produce the required hydraulic pressure if it is driven by the belt at an adequate speed.
  • Power steering leaks from aged rubber hoses, particularly where the rubber is crimped to the steel tube, are not unusual and should be carefully inspected. The system operates under high pressure. The fluid is flammable, and if leaking fluid happens to contact a hot engine part, a fire might result. You always want to be sure the hoses and connections are sound.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(53)

Rating Summary
51
0
0
0
2
51
0
0
0
2

Jeshua

8 years of experience
131 reviews
Jeshua
8 years of experience
Saturn Sky L4-2.4L - Pre-purchase Car Inspection - Bradenton, Florida
I love Jeshua ! He was super nice, informative and thorough.

H

27 years of experience
828 reviews
H
27 years of experience
Saturn Sky L4-2.4L - Battery - Santa Clara, California
Honorio is always very knowledgable and provides an excellent service. This is my third time I work with Honorio and always 5*. Thank you!

Brett

26 years of experience
220 reviews
Brett
26 years of experience
Saturn Sky L4-2.0L Turbo - Car is not starting - Charlotte, North Carolina
Very helpful and prompt!

Kenneth

4 years of experience
6 reviews
Kenneth
4 years of experience
Saturn Sky L4-2.4L - Starter - Scottdale, Georgia
Professional & thorough!

Excellent Rating

(53)

Rating Summary
51
0
0
0
2
51
0
0
0
2
Number of Saturn Sky services completed
583+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

P2601 OBD-II Trouble Code: Coolant Pump Control Circuit Range/Performance
P2601 P2601 code definition The P2601 code is a general OBD-II diagnostic trouble code (DTC) that indicates a fault with the coolant pump control circuit range/performance. What the P2601 code means The coolant pump is an electronically controlled auxiliary pump...
P2257 OBD-II Trouble Code: Secondary Air Injection System Control A Circuit Low
P2257 P2257 code definition Secondary Air Injection System Control A Circuit Low What the P2257 code means P2257 is an OBD-II generic code. The Engine Control Module (ECM) monitors the secondary air injection system control valve A circuit, when the...
How to Transfer a Car Title in Massachusetts
Without Without a title, there is no proof that you own the vehicle in question. The state of Massachusetts (and all other states in the country) require each vehicle to have a title in the name of the owner. When...

Ticking noise in engine does it need valve adjustment??

Hi there. The valves make a ticking noise as they wear, and in order to do any kind of valve adjustment you would need to have the valve clearance checked. If it needs adjustment, then the valve lash adjuster (also...

1984 ranger revving high before shifting into gear. Automatic Transmission

This may be a sign of a faulty MAP sensor as the vehicle responds adversely to a load put on the motor (i.e. putting it in gear, making turns (which makes use of the power steering pressure switch) turning on...

My tsc light is on and car is shaking

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com