Saturn LW2 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(4)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(4)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Saturn LW2 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Saturn LW2V6-3.0LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
Show example Saturn LW2 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Derrick

11 years of experience
174 reviews
Derrick
11 years of experience
Saturn LW2 V6-3.0L - Serpentine/Drive Belt - Vallejo, California
Absolutly professional and. Efficient. Mobile Mechanics will always be my first choice in getting the job done. Thank you!

Johnathon

9 years of experience
162 reviews
Johnathon
9 years of experience
Saturn LW2 V6-3.0L - Spark Plugs - Fresno, California
On time...competent...very knowledgeable

Jose

25 years of experience
64 reviews
Jose
25 years of experience
Saturn LW2 V6-3.0L - Oil Change - Vallejo, California
Good mechanic, really knows his business. Having him come to my home to fix and service my car is fantastic. I'll definitely will have him back for future service or repairs.

H

26 years of experience
828 reviews
H
26 years of experience
Saturn LW2 V6-3.0L - Car is making a noise - Menlo Park, California
Honorio arrived super on time, 1 min before my appointment! He is knowledgeable and patient enough to explain all the issues to me. I got quote for several services (timing belt and stuff), and he told me some of the service other car shop told me was unnecessary. Very honest and friendly man, and I would definitely get his help again. Thank you very much!

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Saturn LW2 services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

What Can Cause Brake Fluid to Leak From the Brake System?
The braking system in a vehicle is designed to circulate brake fluid, using it create the pressure against the wheels when slowing or...
Symptoms of a Bad or Failing Trunk Latch
Common signs include the trunk not shutting or locking and the trunk getting stuck closed.
Cell Phones and Texting: Distracted Driving Laws in Massachusetts
Massachusetts Massachusetts has a statewide ban on texting for drivers of all ages. Drivers under the age of 18 who hold a learner’s permit or provisional license are considered Junior Operators and are not allowed to use a cell phone...

Pinging sound a

Hey there, thanks for writing in about your 2012 Cadillac Escalade. A pinging noise is typically used to refer to spark knock or a damaged engine running condition. Did the Check Engine Light (https://www.yourmechanic.com/article/what-does-the-check-engine-warning-light-mean) return with the same codes after...

Was driving this morning and car just stopped in the middle of the road.

Hello, it sounds like you are on the right track. When you lost power steering and probably air conditioning then you probably lost a belt. When this happened, the alternator also lost power because the belt broke (https://www.yourmechanic.com/services/serpentine-drive-belt-replacement). The vehicle...

I'm trying to reinstall the clutch slave cylinder into the bell housing, but I cant get the shaft to depress so I can bolt it on

It is normal for the shaft to flop around. The slave cylinder may have pressure built up behind the piston. In order to push the piston back you should open the bleeder screw on the slave cylinder just enough to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com