Saturn LS Oil Cooler Hose (Automatic Transmission) Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(1,658)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(1,658)

Oil Cooler Hose (Automatic Transmission) Replacement Service

How much does a Oil Cooler Hose (Automatic Transmission) Replacement cost?

On average, the cost for a Saturn LS Oil Cooler Hose (Automatic Transmission) Replacement is $155 with $60 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2000 Saturn LSL4-2.2LService typeOil Cooler Hose (Automatic Transmission) ReplacementEstimate$234.01Shop/Dealer Price$273.77 - $370.53
Show example Saturn LS Oil Cooler Hose (Automatic Transmission) Replacement prices

What is the Oil Cooler Hose (Automatic Transmission) all about?

The oil cooler hose is responsible for keeping the transmission and engine oil from overheating. The hose runs from the radiator to the transmission and the engine. The oil that is used to lubricate the engine and transmission circulates through the oil cooler hose to the radiator, where it is cooled down. The keeps the oil from overheating and damaging the engine and transmission.

Keep in mind:

Any time the oil cooler hose is replaced, the oil cooler pump should be inspected as well.

How it's done:

  • Inspect for oil leaks
  • Inspect the oil cooler hoses
  • Replace oil cooler hose assembly
  • Check for leaks

Our recommendation:

Your oil cooler system should be inspected during all routine maintenance and servicing. It’s also a good idea to have your oil cooler system inspected every time your oil is changed.

What common symptoms indicate you may need to replace the Oil Cooler Hose (Automatic Transmission)?

  • Oil is leaking

How important is this service?

Your oil cooler system is responsible for cooling the oil in your engine and transmission. The oil circulates through the oil cooler hose and to the radiator, where the oil is cooled before returning to the engine and transmission. This oil is needed to keep the engine well lubricated. When the oil cooler hose breaks, oil will leak out of the hose, and will be removed from the system. The engine and transmission won’t have the lubrication they need, which can be harmful to both systems, and will likely cause overheating.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saturn mechanics

Real customer reviews from Saturn owners like you.

Excellent Rating

(1,658)

Rating Summary
1,541
69
14
7
27
1,541
69
14
7
27

Oscar

24 years of experience
72 reviews
Oscar
24 years of experience
Saturn LS L4-2.2L - Car is not starting - Odenton, Maryland
Oscar was very professional and knowledgeable about cars. He let me know exactly what was wrong with my car. I had been told my fuel pump was bad which is why my car wouldn't start. Well turns out that wasn't the case at all. Oscar found that it was a broken timing chain was the reason for my car not starting. I'm glad I found that out before shelling out unnecessary money on something that wasn't broken at all. All in all Great service across the board and I would highly recommend Oscar for any auto needs.

Richard

11 years of experience
450 reviews
Richard
11 years of experience
Saturn LS L4-2.2L - Coolant is leaking - Odenton, Maryland
Great Service! He was knowledgeable about what my issue was and provided me with the help that I needed.

Lewis

16 years of experience
118 reviews
Lewis
16 years of experience
Saturn Vue V6-3.5L - Wheel Bearings Replacement (Passenger Side Rear) - Dallas, Texas
Lewis was great and honest. I was told by a shop I had 2 bad rear CV axles which was going to cost a total of $1,700 through them. Lewis checked out my car, and I in fact didn't need 2 rear axles at all! He found that it was just a wheel bearing, and it only costed me a little less than $200. Thanks, Lewis, for being so great!

Chris

22 years of experience
2235 reviews
Chris
22 years of experience
Saturn Sky L4-2.4L - Brake Light Switch - Murrieta, California
Excellent diagnostic skills; very efficient !

Excellent Rating

(1,658)

Rating Summary
1,541
69
14
7
27
1,541
69
14
7
27
Number of Saturn services completed
18238+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saturn MECHANICS
700+
experts on our platform

Recent articles & questions

Is It Safe to Drive with the Check Engine Light On?
The check engine light is tied into your car’s onboard diagnostics system, and it’s designed to light up (usually in yellow) whenever...
How to Buy a Used Commercial Truck
A commercial truck can be a wonderful addition to many business, both new and growing. Whether you need products delivered, or heavy equipment moved, a commercial truck can be beneficial to your business. Often, a relatively small business may prefer...
P0662 OBD-II Trouble Code: Intake Manifold Tuning Valve Control Circuit High Bank 1
P0662 means there is a voltage problem with the intake manifold tuning valve due to a faulty manifold or wiring issue.

My steering has to move freely. What can be the issue? , 2008 Suzuki Swift

Hello - you don't mention a power interruption to the vehicle (such as changing the battery), but it sounds as though the battery may have been disconnected, and the steering angle sensor (part of the EPS system) needs to be...

Would a bad pcv valve make the engine run hot

Hi there. From the description you have provided, your vehicle's bad PCV and coolant loss are not related. The PCV (positive crankcase ventilation) valve is designed to remove combustion gases that get past the piston rings into the engine. Typically,...

Brake sinks slowly while at stop

The most common cause for the brake pedal to sink slowly to the floor will be the brake master cylinder internal pressure cup failure. The seals may be worn or sludged up from old dirty brake fluid. I have seen...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com