Saab 900 Front Crankshaft Seal Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(27)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(27)

Front Crankshaft Seal Replacement Service

How much does a Front Crankshaft Seal Replacement cost?

On average, the cost for a Saab 900 Front Crankshaft Seal Replacement is $211 with $15 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Saab 900L4-2.3LService typeFront Crankshaft Seal ReplacementEstimate$251.30Shop/Dealer Price$264.92 - $294.42
1993 Saab 900L4-2.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$428.47Shop/Dealer Price$442.00 - $471.44
1996 Saab 900L4-2.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$413.87Shop/Dealer Price$427.28 - $456.63
1990 Saab 900L4-2.0LService typeFront Crankshaft Seal ReplacementEstimate$428.47Shop/Dealer Price$442.06 - $471.55
1997 Saab 900L4-2.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$413.87Shop/Dealer Price$431.11 - $463.33
1994 Saab 900L4-2.1LService typeFront Crankshaft Seal ReplacementEstimate$428.47Shop/Dealer Price$442.44 - $472.22
1991 Saab 900L4-2.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$428.47Shop/Dealer Price$442.11 - $471.63
1998 Saab 900L4-2.0L TurboService typeFront Crankshaft Seal ReplacementEstimate$413.87Shop/Dealer Price$427.28 - $456.63
Show example Saab 900 Front Crankshaft Seal Replacement prices

What is the Front Crankshaft Seal all about?

A number of mechanisms must work together to make your vehicle move forward. One of the most important is the crankshaft, which converts rotary into linear motion; i.e., it transforms the force created by the engine's pistons moving up and down into a force that moves in a circular motion that causes a car’s wheel to turn. Enclosed in what’s called a crankcase—the largest cavity in the engine block, just below the cylinders—the crankshaft must be completely lubricated, essentially submerged in oil, to spin nearly friction-free and do its job properly.

Consequently, there are seals located at either end of the crankshaft that allow it to spin freely and keep engine oil from escaping the engine block, as well as prevent contaminants and other debris from entering and causing damage to the mechanism. Since there are two ends of the crankshaft, there are two types of seals: the front crankshaft seal and the rear crankshaft seal, also known as the front main and rear main seals.

Keep in mind:

  • Loss of oil will eventually cause serious internal engine damage.
  • Inspect the sealing surface of the crankshaft or the crankshaft pulley (depending on the engine design) for damage when replacing the crankshaft seal.
  • Oil degrades rubber components.

How it's done:

  • The vehicle is raised and supported on jack stands
  • The crankshaft damper and timing belt is removed
  • The crankshaft seal is removed and a new one installed
  • The timing belt and cover along with crankshaft damper is reinstalled
  • The engine accessory belts are installed and the vehicle is lowered off of the jack stands

Our recommendation:

One of the most important parts of your car, crankshaft seals are typically made from a durable material, such as a synthetic rubber or silicone, designed to handle the extreme pressure and temperatures as well as the caustic chemicals in your engine oil. Because they are exposed to such abuse, main seals are subject to a lot of wear and tear. And whether you are talking a front or rear main seal, replacement is the only cure when one malfunctions.

The good news is that the seals are relatively inexpensive components. The bad news is that neither is easy to replace.

Front seal: The front seal is located behind the main pulley that drives all the belts, which is, of course, always spinning. The main pulley throws any leaking oil out in a big circle. It can get thrown up on the alternator, steering pump, belts, in short anything attached to the front of the engine and cause a real mess and eventually some serious damage. Consequently, it has to be removed along with many of the components attached to the front of the block to replace the front main seal.

Rear seal: The rear crankshaft seal is placed along with the transmission; therefore, the process of replacing it requires the removal of transmission, as well as the clutch and flywheel assembly. This is a very involved job.

What common symptoms indicate you may need to replace the Front Crankshaft Seal?

  • Oil leaking from the front crank pulley.
  • Oil dripping from the bottom of the clutch housing, where the block and transmission meet.
  • Clutch slip caused by oil spraying on the clutch.

How important is this service?

Letting either crankshaft seal continue to leak can be detrimental to your vehicle’s continued operation. Besides the maladies caused by driving around with little to no oil flowing in the engine, the faulty seal will be spread oil through the engine bay and undercarriage of your car as you drive, a mess that is difficult to clean up and can be a fire hazard. Replacing is better addressed sooner than later.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saab mechanics

Real customer reviews from Saab owners like you.

Excellent Rating

(27)

Rating Summary
20
4
3
0
0
20
4
3
0
0

Andrew

10 years of experience
440 reviews
Andrew
10 years of experience
900 1998 - Car starts and then dies - Portland, OR
He even showed up early on a snowy day!

Andrew

5 years of experience
865 reviews
Andrew
5 years of experience
900 1995 - Water Pump - Kansas City, MO
Awesome work very friendly

Carlos

23 years of experience
467 reviews
Carlos
23 years of experience
900 1995 - Emergency / Parking Brake Shoe - Glendora, CA
My repair with Carlos has been the best experience I have had with a mechanic within my 15 years of vehicle ownership. He was authentic, caring and showed great appreciation for being able to service my vehicle. Thank you, Carlos. -Nicholas (95 Saab 900s)

Robert

0 years of experience
712 reviews
Robert
0 years of experience
900 1995 - Control Arm Assembly - Los Gatos, CA
He arrived on time and got the work done very quickly. He is very personable and a great asset to your company.

Excellent Rating

(27)

Rating Summary
20
4
3
0
0
20
4
3
0
0
Number of Saab 900 services completed
297+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saab MECHANICS
200+
experts on our platform

Recent articles & questions

How Long Does a Crankcase Vent Filter Last?
The The crankcase vent filter is connected to a breather tube that connects the crankcase and then has access outside to clean air. The clean air then flows back in through the crankcase vent filter and into the engine to...
Windshield Laws in Iowa
If If you drive on the roads in Iowa, you have to be familiar with the traffic laws and follow them. In addition to those rules, you are also required to make sure that your windshield is in compliance with...
P2670 OBD-II Trouble Code: Actuator Supply Voltage B Circuit Low
P2670 P2670 code definition A P2670 trouble code indicates the detection of a problem by the PCM or a supporting control module in the actuator supply voltage B circuit. Some of the possible modules that could detect this fault include...

Car doesn't hold idle, I tried changing the PCV valve, what else could be wrong?

If you have to remove the PCV valve (https://www.yourmechanic.com/services/positive-crankcase-ventilation-pcv-valve-replacement) to make the vehicle operate correctly, then there is an issue with the combustion in the engine. The rings to the cylinders are not sealing properly and causing lots of blow...

Car intermittently won't start -- this time won't even start when jump started

Hi Eric M. An issue like you've described is very difficult to diagnose without an onsite inspection (https://www.yourmechanic.com/services/electric-problems-inspection). If you're able to activate the starter on a consistent basis, then you can rule that component out as the source of...

Knocking noise around intake and coolant leaking

If you have a severe coolant leak from the water pump, I would recommend replacing the water pump in order to resolve the leak prior to doing any other repairs. I say this because it is possible that the water...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com