Saab 900 Brake Pad Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(27)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(27)

Brake Pad Replacement Service

How much does a Brake Pad Replacement cost?

On average, the cost for a Saab 900 Brake Pad Replacement is $199 with $59 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1996 Saab 900L4-2.3LService typeBrake Pads - Front ReplacementEstimate$347.06Shop/Dealer Price$398.68 - $545.42
1997 Saab 900L4-2.3LService typeBrake Pads - Front ReplacementEstimate$407.39Shop/Dealer Price$474.57 - $672.00
1993 Saab 900L4-2.0L TurboService typeBrake Pads - Front ReplacementEstimate$330.57Shop/Dealer Price$378.57 - $518.40
1995 Saab 900L4-2.3LService typeBrake Pads - Rear ReplacementEstimate$323.75Shop/Dealer Price$370.05 - $504.76
1995 Saab 900L4-2.0L TurboService typeBrake Pads - Rear ReplacementEstimate$323.75Shop/Dealer Price$371.52 - $507.34
1990 Saab 900L4-2.0LService typeBrake Pads - Front ReplacementEstimate$330.57Shop/Dealer Price$378.71 - $518.65
1992 Saab 900L4-2.0L TurboService typeBrake Pads - Front ReplacementEstimate$330.57Shop/Dealer Price$378.59 - $518.43
1998 Saab 900L4-2.0L TurboService typeBrake Pads - Rear ReplacementEstimate$307.11Shop/Dealer Price$349.25 - $471.48
Show example Saab 900 Brake Pad Replacement prices

What are brake pads and how do they work?

Brake pads consist of friction material that is bonded to a sturdy steel backing plate. When you push on the brake pedal, the friction material on the brake pads is forced against the inner and outer surfaces of the steel brake rotor under tremendous pressure. The resulting friction causes the wheels on your car to slow rapidly allowing for a quick, safe and controlled stop. After thousands of miles, this friction material eventually wears away, and the brake rotor wears away as well, requiring replacement.

Brakes-Service

When to replace brake pads?

Here are several indications that you need new brake pads:

  • Wear indicator on vehicle dashboard. When the friction material on the brake pads is worn to within 2 mm of the pad backing plate, replacement of the pads is necessary. Most newer cars today have electronics built into the brake pad. When the pad is at a point that it needs to be replaced, a symbol will appear on your vehicle dashboard’s instrument cluster. Consult your owner’s manual to learn what the symbol looks like.
  • High pitched squeal when braking. When the friction material on the pads is worn close to the backing plate, you may hear a squealing or squeaking noise as you drive regardless of whether you are applying the brakes or not. That squealing or squeaking noise is designed to make you aware that the brake pads are getting low and need to be inspected. If all of the friction material on the brake pad has been worn away, you will hear grinding and scraping noises when you apply the brakes. Pad replacement is mandatory at this point and the vehicle is unsafe to drive until corrected.
  • Brake pedal pulsation or vehicle vibration. Over time, brake rotors may develop excessive thickness variation (>.001 inches), excessive runout on the wheel hub (> .002 inches), or the brake rotor may warp due to high operating temperatures. If these defects exist, you may notice pulsation in the brake pedal or steering wheel during braking. New pads and rotor resurfacing or replacement will be required if the rotor has any of the above-mentioned deficiencies.
  • Vehicle pulling or wandering on braking. If your car pulls to the right or left during braking, that could be a sign of a sticking brake caliper, misalignment of the suspension, and sometimes tire defects or uneven tire inflation from side-to-side. The mechanic who inspects your vehicle will determine if new brake pads alone will resolve the issue or if other repairs are needed.
  • High mileage on existing pads. Regardless of whether any of the above brake system symptoms occur, every 10,000 miles a mechanic should measure the thickness of the remaining friction material on the brake pads and perform a thorough visual inspection of the braking system.
  • Brake system warning lights and/or maintenance reminder messages. Should your brake system warning light ever illuminates, or a brake system related maintenance reminder message appears in the driver information display, have your vehicle inspected and repaired as soon as possible.

How do mechanics replace brake pads?

Normally, pad replacement requires these steps:

  • Confirm the thickness of the remaining friction material on the brake pads. If the remaining friction material is less than 2 mm in thickness, pad replacement is warranted.
  • Visually inspect the brake rotor surface that contacts the pad (for scoring, pitting, grooves, rust) and measure the brake rotor with precision tools for thickness variation, run-out and warpage.
  • Inspect the caliper, torque plate, pads, and rotors to determine if the caliper is operating freely (i.e., inspect for stuck calipers).
  • Install new pads and any additional recommended components (e.g., rotors, if rotors depart from OEM specifications) only with customer approval of course.
  • Lubricate brake system components, such as caliper sliding pins, and inspect the condition of the brake fluid. Top off brake fluid as required.
  • Perform a basic 50 point safety inspection of your vehicle.
  • Finally, the mechanic will test drive your vehicle to confirm normal operation of the brake system.

Is it safe to drive with a brake pad problem?

Driving a vehicle with a known deficiency in the braking system is unsafe and consequently is not recommended. Worn out brake pads can increase stopping distances and so for your safety, it is always advised that worn out brake pads be replaced promptly. Further driving is not recommended and you should request service at your earliest convenience if any of the following circumstances exist: stopping distances are much greater than what you are accustomed to; the brake pedal is not firm or is low; there is loss of braking power assist; the vehicle pulls severely to one side on braking; or the brake system warning light is on.

If you detect unusual noises, such as squealing or grinding, but stopping distances are close to what you are used to, and the brake pedal is firm, and there are no warning lights, it may be safe to proceed to your destination but schedule service at your earliest convenience. When it comes to the brakes on your vehicle, always err on the side of caution and have a mechanic check your brake pads and braking system at the first indication of a problem.

When replacing brake pads keep in mind:

Brake pads must always be replaced as a set, that is both wheels (driver and passenger side) on an axle, front or rear, must be serviced. If brake pads on only one side of the car were replaced, your car might pull to one side when you apply the brakes. Often, resurfacing or replacement of the brake rotors is necessary and a competent mechanic will always measure for wear and damage to the brake rotors and advise you as to whether rotor replacement or re-surfacing is needed.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Saab mechanics

Real customer reviews from Saab owners like you.

Excellent Rating

(27)

Rating Summary
20
4
3
0
0
20
4
3
0
0

Andrew

10 years of experience
440 reviews
Andrew
10 years of experience
900 1998 - Car starts and then dies - Portland, OR
He even showed up early on a snowy day!

Andrew

5 years of experience
865 reviews
Andrew
5 years of experience
900 1995 - Water Pump - Kansas City, MO
Awesome work very friendly

Carlos

23 years of experience
467 reviews
Carlos
23 years of experience
900 1995 - Emergency / Parking Brake Shoe - Glendora, CA
My repair with Carlos has been the best experience I have had with a mechanic within my 15 years of vehicle ownership. He was authentic, caring and showed great appreciation for being able to service my vehicle. Thank you, Carlos. -Nicholas (95 Saab 900s)

Robert

0 years of experience
712 reviews
Robert
0 years of experience
900 1995 - Control Arm Assembly - Los Gatos, CA
He arrived on time and got the work done very quickly. He is very personable and a great asset to your company.

Excellent Rating

(27)

Rating Summary
20
4
3
0
0
20
4
3
0
0
Number of Saab 900 services completed
297+
services done by our mechanics
TOTAL NUMBER OF EXPERT Saab MECHANICS
200+
experts on our platform

Recent articles & questions

The Guide To Colored Curb Zones in Mississippi
Mississippi Mississippi parking laws: understanding the basics A big part of the responsibility of driving is knowing where to park legally and safely. Mississippi drivers should take the time to understand the rules and laws of parking in the state...
How Long Does a Horn Last?
For For most car owners, staying safe while on the roadways is a top priority. While the roadways can be a dangerous place, there are a variety of things on your car that are there to offer a higher degree...
Understanding the Mazda Oil Life Monitor and Service Indicator Lights
Car symbols, or dashboard lights, are a car service reminder. The Mazda Oil Life Monitor system indicates when and what service your car needs.

Car shakes entirely - 2015 Acura TLX

Hi! That's an unsual issue on such a new vehicle. I'm curious what the Acura dealer service department said about this. Being that your TLX is so new and covered under warranty, I suggest talking with the service manager about...

I just got a P0087 code on my Mercedes.

Hi there. A fuel filter can cause a restriction in the fuel line if the filter is plugged up. If you are getting a P0087 code (https://www.yourmechanic.com/article/p0087-obd-ii-trouble-code-fuel-rail-system-pressure-too-low-by-spencer-clayton) for fuel pressure rail is low, then put a fuel pressure tester on...

Need help identifying issue please!

Hello, thank you for writing in. It is possible the leak was starting to form when you were driving around the last couple of days. Automatic transmissions have a complex amount of components, seals, gaskets, and various passages for the...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com