Ram Dakota Oil Pressure Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Oil Pressure Sensor Replacement Service

How much does a Oil Pressure Sensor Replacement cost?

On average, the cost for a Ram Dakota Oil Pressure Sensor Replacement is $223 with $83 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2011 Ram DakotaV6-3.7LService typeOil Pressure Sensor ReplacementEstimate$373.74Shop/Dealer Price$432.03 - $598.78
2011 Ram DakotaV8-4.7LService typeOil Pressure Sensor ReplacementEstimate$312.63Shop/Dealer Price$356.12 - $482.48
Show example Ram Dakota Oil Pressure Sensor Replacement prices

What is the Oil Pressure Sensor all about?

Oil is vital for your engine – you need enough oil to lubricate and reduce friction throughout the engine. There’s no way to visually determine how much oil is being pumped through your engine, so your car’s computer relies on the oil pressure sensor to determine the flow.The oil pressure sensor is a basic electrical switch that provides information to the instrument cluster’s oil pressure gauge with the accurate real-time pressure. When the pressure is too low, not enough oil is being pumped through the engine to lubricate and cool components. When pressure drops below a threshold set by the automaker, the engine oil light on the car’s dashboard illuminates, warning you that driving could be dangerous.

Keep in mind:

  • There is no way to visually determine the operating condition of your oil pressure sensor.
  • If the sensor fails, it is impossible to determine whether there is sufficient oil flow/pressure to lubricate and protect your engine.
  • If your oil pressure sensor fails, it should be replaced immediately.

How it's done:

  • The vehicle is raised and supported on jack stands and tire is removed
  • The defective oil pressure sensor is removed
  • The new oil pressure sensor is installed
  • The engine is started and oil pressure is checked then the vehicle is taken off the jack stands
  • The vehicle is road tested for proper operation

Our recommendation:

Your car’s oil pressure sensor is an electrical component, and can be subjected to a number of issues, including wiring damage. If you suspect damage to the sensor, or have noticed your oil light come on, have it inspected and diagnosed by one of our expert mechanics.

What common symptoms indicate you may need to replace the Oil Pressure Sensor?

  • Oil pressure light is on
  • Oil pressure light turns on and off (can indicate several potential problems)
  • Depending on your make and model, you may have an oil pressure gauge that displays pressure in PSI. Note any drops below normal operating pressure.

How important is this service?

It is absolutely vital that your engine oil pressure be constantly monitored for potentially dangerous conditions. If your oil pressure sensor isn’t working properly, it cannot do its job, and must be replaced. If your oil pressure light comes on, call one of our expert mechanics immediately (driving with the light on can potentially cause damage).

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ram mechanics

Real customer reviews from Ram owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Steven

22 years of experience
200 reviews
Steven
22 years of experience
Ram Dakota V8-4.7L - Spark Plugs - Irving, Texas
He was great. A lot of knowledge and very productive!

Michael

5 years of experience
355 reviews
Michael
5 years of experience
Ram Dakota V8-4.7L - Starter - Greenfield, Indiana
Fast, on time knew what to do and did it!

Michael

5 years of experience
355 reviews
Michael
5 years of experience
Ram Dakota V8-4.7L - Car is not starting - Greenfield, Indiana
Michael carefully checked out problem and determined the problem, gave me a quote and set up a appointment while he was here!

Adam

17 years of experience
64 reviews
Adam
17 years of experience
Ram Dakota V8-4.7L - Shock Absorber Replacement (Rear) - Irving, Texas
Adam is very skilled and reliable.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Ram Dakota services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ram MECHANICS
300+
experts on our platform

Recent articles & questions

How Long Does a Heater Bypass Tube Last?
In In order for the cooling system on your vehicle to work, you will have to make sure that all of its components are repair free. The thermostat that is on your vehicle helps to regulate the flow of coolant...
How to Choose the Best Family Car to Buy
Whether you’re looking to start a family or have a household of children to transport every day, families everywhere have more car buying options than ever before. From station wagons to SUVs, it seems that more and more cars are...
The Best Used Cars to Buy If You’re a Plumber
Plumbers Plumbers need to carry around all manner of tools and supplies. If you’re plumbing a large building, or even a decent sized home, you’re going to need a vehicle that has quite a bit of cargo capacity. A car...

Car jerks and stalls in First and Second gear

It is possible that the hydraulic system for your clutch pedal may be causing your problem. Depending on the mileage that is on your clutch, and how you drive, you may also be due to have the clutch replaced. Either...

My car slips on icy roads

All-wheel drive is the best for driving in poor weather conditions (https://www.yourmechanic.com/article/safe-winter-driving-techniques-by-kevin-woo). But, if you hit black ice, it really doesn't matter what set up you have, you're still going to loose traction. In theory, a vehicle with a wide...

Changing a coil pack

Hey there. The easiest way will be to use a pair of long needle nose pliers. These pliers can reach down into the spark plug hole and then grab onto the rubber boot and lift and twist at the same...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com