Ram C/V Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(9)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(9)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Ram C/V Power Steering Pressure Hose Replacement is $216 with $111 for parts and $104 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Ram C/VV6-3.6LService typePower Steering Pressure Hose ReplacementEstimate$411.51Shop/Dealer Price$493.77 - $715.78
2012 Ram C/VV6-3.6LService typePower Steering Pressure Hose ReplacementEstimate$389.51Shop/Dealer Price$471.79 - $693.82
2015 Ram C/VV6-3.6LService typePower Steering Pressure Hose ReplacementEstimate$326.59Shop/Dealer Price$393.13 - $567.97
2014 Ram C/VV6-3.6LService typePower Steering Pressure Hose ReplacementEstimate$389.51Shop/Dealer Price$471.76 - $693.77
Show example Ram C/V Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Ram mechanics

Real customer reviews from Ram owners like you.

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0

Behrak

9 years of experience
321 reviews
Behrak
9 years of experience
Ram C/V V6-3.6L - Axle / CV Shaft Assembly Replacement (Passenger Side Front) - Alpharetta, Georgia
The experience was awesome very knowledgeable and will certainly use Behrak again.

Jamie

22 years of experience
91 reviews
Jamie
22 years of experience
Ram C/V V6-3.6L - Thermostat Housing - Moreno Valley, California
Had a great experience with Jamie, he showed up and got the job done.

Chris

22 years of experience
2223 reviews
Chris
22 years of experience
Ram C/V V6-3.6L - Oil Change - Irvine, California
It's really hard to schedule an appointment with a dealership and they always seem to have a delay. I was blown away by everything including a few automotive tips. We're going to have him service our other cars. Another great thing is now I can be preventative and know when and how long I will be without my work vehicle.

Daniel

21 years of experience
346 reviews
Daniel
21 years of experience
Ram C/V V6-3.6L - Door Lock Actuator Replacement (Driver Side Front) - Rosharon, Texas
Very proffesional and efficient

Excellent Rating

(9)

Rating Summary
9
0
0
0
0
9
0
0
0
0
Number of Ram C/V services completed
99+
services done by our mechanics
TOTAL NUMBER OF EXPERT Ram MECHANICS
300+
experts on our platform

Recent articles & questions

How to Transfer a Car Title in Rhode Island
A A car title is the document that proves ownership of a particular vehicle. However, when that ownership changes, whether through a sale, a donation, or through inheritance, the title must be updated to reflect the new situation. This is...
P0785 OBD-II Trouble Code: Shift/Timing Solenoid Malfunction/ 3-2 Shift Solenoid Circuit Electrical
P0785 means there was an abnormality detected in the shift/time solenoid often due too a faulty shift solenoid or failures in the transmission.
What Do the Headlight Indicators Mean?
Headlight indicators help you know if your headlights, taillights, and high beams are on for your car.

Warning lights after ABS brake flex lines replaced

The ABS and brake light warning switch are on different circuits and do not work with each other. The most likely cause of the Check Brake Light message would be a wiring issue, failed bulb, improper bulb, or a brake...

Is a 2008 bmw 528i with 80,000 miles still a good car to buy ?

Hello. This does appear to be a good deal for this car, but it needs to have a full inspection prior to being purchased. This car is nearing the time when it will usually get very expensive to maintain and...

2nd year service on 2015 Land Rover Lr4

Hi there. Thanks for writing into YourMechanic.com. In regards to the service that is required for your vehicle coming up, you might find this online tool very helpful (https://www.yourmechanic.com/scheduled-maintenance). Our scheduled maintenance portal outline all of the scheduled maintenance that...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com