Porsche 944 Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(17)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(17)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Porsche 944 Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1985 Porsche 944L4-2.5LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$139.99 - $158.75
1987 Porsche 944L4-2.5L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$120.04 - $138.82
1983 Porsche 944L4-2.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$120.03 - $138.82
1991 Porsche 944L4-3.0LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$119.98 - $138.72
1988 Porsche 944L4-2.5L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$120.07 - $138.89
1989 Porsche 944L4-2.5L TurboService typeWindows InspectionEstimate$94.99Shop/Dealer Price$120.03 - $138.82
1989 Porsche 944L4-2.7LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$124.69 - $143.22
1986 Porsche 944L4-2.5LService typeWindows InspectionEstimate$99.99Shop/Dealer Price$125.63 - $144.85
Show example Porsche 944 Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Porsche mechanics

Real customer reviews from Porsche owners like you.

Excellent Rating

(17)

Rating Summary
16
0
0
0
1
16
0
0
0
1

Joe

20 years of experience
126 reviews
Joe
20 years of experience
Porsche 944 L4-2.5L - Oil/Fluid Leak - Chicago, Illinois
Joe was very thorough with his inspection of my car. He was on time and was able to tell me the exact steps needed to make the repair. I look forward to using Joe in the future.

Ben

41 years of experience
1421 reviews
Ben
41 years of experience
Porsche 944 L4-2.5L - Car is not starting - Houston, Texas
Very professional in his approach. He went above and beyond and solved the hard start problem of my 944.

Arturo

27 years of experience
303 reviews
Arturo
27 years of experience
Porsche 944 L4-2.5L - Car is not starting - San Diego, California
Knew what he was doing, great to talk to, and told me what my next steps should be as far as engine work. He's a great mechanic. One I could see myself calling time and time again.

Tam

22 years of experience
251 reviews
Tam
22 years of experience
Porsche 944 L4-2.5L - Car is not starting - San Francisco, California
Great to have a mechanic come to me, not just that but Tam was thorough and found all the other issues I was experiencing. A true delight.

Excellent Rating

(17)

Rating Summary
16
0
0
0
1
16
0
0
0
1
Number of Porsche 944 services completed
187+
services done by our mechanics
TOTAL NUMBER OF EXPERT Porsche MECHANICS
300+
experts on our platform

Recent articles & questions

How to Get Acura Dealership Certified
Acura car dealerships offer automotive technician jobs to mechanics who are Acura certified through the PACT program.
How to Replace an Air Injection Pump Filter
Air pump filters may be failing when the engine has a rough idle and is sluggish. Reduced fuel economy may also indicate a bad filter.
How to Get Pre-Approved for a Car Loan
Pre-approved car loans make buying a new car easier. Apply for a car loan before you begin car shopping so you can get the best rate and deal.

Car will not shift and stalls - 2016 Subaru WRX

Hey there. Considering the burning smell, there may be a problem in the hydraulic circuit of the clutch system. A failing clutch master (https://www.yourmechanic.com/services/clutch-master-cylinder-replacement) or slave cylinder (https://www.yourmechanic.com/services/clutch-slave-cylinder-replacement) can cause the problems you are having. To have this diagnosed more...

Car starts, shakes 5 seconds and dies

Hi there. Unfortunately, we do not provide repair or diagnosis services for aftermarket part replacement jobs. However, in general, when this type of problem occurs, it's due to a vacuum line being disconnected. I would double check your connections first...

I have a 2009 Dodge [Ram 1500](/topics-ram-1500/). I just replaced ball joints and went to go start the truck and then no crank. Only one click at fuse box under the hood. [Battery](/topics-battery-dodge/) is new and charged. The security light is also flashing.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com