Pontiac Torrent Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(78)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(78)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Pontiac Torrent Power Steering Pressure Hose Replacement is $265 with $125 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2006 Pontiac TorrentV6-3.4LService typePower Steering Pressure Hose ReplacementEstimate$405.94Shop/Dealer Price$472.28 - $663.18
2007 Pontiac TorrentV6-3.4LService typePower Steering Pressure Hose ReplacementEstimate$484.52Shop/Dealer Price$550.19 - $740.60
2008 Pontiac TorrentV6-3.6LService typePower Steering Pressure Hose ReplacementEstimate$645.88Shop/Dealer Price$751.93 - $1063.39
2009 Pontiac TorrentV6-3.6LService typePower Steering Pressure Hose ReplacementEstimate$645.88Shop/Dealer Price$751.93 - $1063.39
2008 Pontiac TorrentV6-3.4LService typePower Steering Pressure Hose ReplacementEstimate$541.76Shop/Dealer Price$624.14 - $859.27
2009 Pontiac TorrentV6-3.4LService typePower Steering Pressure Hose ReplacementEstimate$541.76Shop/Dealer Price$622.01 - $855.54
Show example Pontiac Torrent Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(78)

Rating Summary
73
4
0
1
0
73
4
0
1
0

Patrick

9 years of experience
48 reviews
Patrick
9 years of experience
Pontiac Torrent V6-3.4L - Headlight Bulb Replacement (Driver Side Low Beam) - Decatur, Georgia
Patrick is a professional who take pride in performing his job and keeping the customer informed of his intentions.

Diego

22 years of experience
564 reviews
Diego
22 years of experience
Pontiac Torrent V6-3.4L - Exhaust Gas Recirculation/EGR Valve - Sun City West, Arizona
Diego conscientious and very knowledgeable.

Attila

20 years of experience
1104 reviews
Attila
20 years of experience
Pontiac Torrent V6-3.4L - Electric Problems - Morristown, New Jersey
Good to have known Mr. Atila on this app. He is such a great help.

Jose

38 years of experience
21 reviews
Jose
38 years of experience
Pontiac Torrent V6-3.4L - Car is not starting - Clermont, Florida
Very nice and experimented tech.

Excellent Rating

(78)

Rating Summary
73
4
0
1
0
73
4
0
1
0
Number of Pontiac Torrent services completed
858+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

A Buyer’s Guide to the 2012 BMW ActiveHybrid 5
In In 2012, BMW brought out the turbocharged 3.0 liter engine ActiveHybrid 5. The ActiveHybrid 5 is a real wheel, four door sedan that holds five passengers. Key Features Key features of the ActiveHybrid include the 3.0 liter inline six...
How to Replace an AC Pressure Switch
The AC pressure switch protects the AC system from pressure that's too high or low. Common signs of failure include a bad compressor or lack of AC.
Cell Phones and Texting: Distracted Driving Laws in Washington
Washington Washington defines distracted driving as taking attention away from the road or paying attention to something other than driving. Texting while driving is illegal for drivers of all ages in Washington. Furthermore, using handheld cell phones is illegal for...

What are the uses of the ABS module?

Hello. Your car is equipped with wheel speed sensors (https://www.yourmechanic.com/services/wheel-speed-sensor-replacement) at each of the four wheels which monitor wheel speed while relaying this information constantly to the ABS and traction control system which are controlled by the car's ECU. When...

Blowing oil through valve covers.

Hi there. Check the positive crankcase ventilation valve (PCV) and see if it's plugged up. Also, check the engine oil and make sure that there is the proper amount of oil in the engine. Too much oil or a sticking...

I have a 2002 toyota camry LE engine wich i want to use on a 2004 toyota camry XLE .is my 02 toyota camry engine compatible ?

Hi there. Assuming that both engines are the same size, the compatibility of "fitting" should be OK. However, since this is a service we don't offer, we're not best suited to provide the best advice on this. I can tell...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com