Pontiac G8 Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(36)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(36)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Pontiac G8 Car Thermostat Replacement is $242 with $102 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2009 Pontiac G8V8-6.0LService typeCar Thermostat ReplacementEstimate$358.80Shop/Dealer Price$413.35 - $568.90
2009 Pontiac G8V6-3.6LService typeCar Thermostat ReplacementEstimate$1070.52Shop/Dealer Price$1261.89 - $1826.92
2008 Pontiac G8V8-6.0LService typeCar Thermostat ReplacementEstimate$349.79Shop/Dealer Price$402.60 - $556.84
2009 Pontiac G8V8-6.2LService typeCar Thermostat ReplacementEstimate$349.79Shop/Dealer Price$402.60 - $556.84
2008 Pontiac G8V6-3.6LService typeCar Thermostat ReplacementEstimate$1070.52Shop/Dealer Price$1265.18 - $1832.68
Show example Pontiac G8 Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Pontiac mechanics

Real customer reviews from Pontiac owners like you.

Excellent Rating

(36)

Rating Summary
32
4
0
0
0
32
4
0
0
0

Chuy

15 years of experience
503 reviews
Chuy
15 years of experience
Pontiac G8 V8-6.0L - ABS Light is on - Chicago, Illinois
Very trustworthy

Joe

16 years of experience
453 reviews
Joe
16 years of experience
Pontiac G8 V6-3.6L - Alternator - Nashville, Tennessee
Joe was very helpful and willing to do the best job possible!

Gustavo

18 years of experience
575 reviews
Gustavo
18 years of experience
Pontiac G8 V8-6.0L - Oil/Fluid Leak - Cibolo, Texas
Gustavo was very friendly and very knowledgeable. He immediately knew the issue. He gave the quote but allowed me the option to do it myself.

Ray

13 years of experience
17 reviews
Ray
13 years of experience
Pontiac G8 V6-3.6L - Spark Plugs - Dallas, Texas
Ray was on time, friendly and very professional!

Excellent Rating

(36)

Rating Summary
32
4
0
0
0
32
4
0
0
0
Number of Pontiac G8 services completed
396+
services done by our mechanics
TOTAL NUMBER OF EXPERT Pontiac MECHANICS
800+
experts on our platform

Recent articles & questions

P0815 OBD-II Trouble Code: Upshift Switch Circuit
What What the P0815 code means Your vehicle’s powertrain control module (PCM) has recognized a problem in the electrical circuit of the upshift switch circuit. The upshift/downshift switch is located in the passenger compartment near your vehicle’s shifter. Please note...
What does a Pull/Clear CEL code or check engine light mean?
What kinds of car issues could the check engine light indicate?
How Long Does a Heater Blower Motor Resistor Last?
Keeping Keeping the cabin of your car warm during the frigid temperatures of winter can be a lot easier said than done. If even one of the components of the heater are not working properly, it can prohibit the warm...

My coolant is boiling out of my overflow tank.

This is most likely the result of a failing fan switch relay (https://www.yourmechanic.com/services/cooling-fan-relay-replacement) or a failed thermostat (https://www.yourmechanic.com/services/thermostat-replacement). The thermostat is a component that regulates the flow of coolant through the motor based upon specific temperatures. When the engine reaches...

Car vibrates on release of clutch

You are probably experiencing what we call "clutch chatter" It commonly occurs because of oil on the clutch lining. But it can also be simply a result of wear and tear forming hot spots on the pressure plate and flywheel....

Removing the mass airflow sensor. It's stuck can't get leverage to pull out the electrical plug or get screws out. 2015 sentra

There are two screws holding the sensor in place. They may be 7 mm hex. If the guard is preventing access, of course simply remove the guard. Your vehicle is only 1-2 years old, so do be sure the MAF...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com