Plymouth Grand Voyager Mass Airflow Sensor Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(50)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(50)

Mass Airflow Sensor Replacement Service

How much does a Mass Airflow Sensor Replacement cost?

On average, the cost for a Plymouth Grand Voyager Mass Airflow Sensor Replacement is $279 with $184 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Plymouth Grand VoyagerV6-3.0LService typeMass Airflow Sensor ReplacementEstimate$791.53Shop/Dealer Price$970.67 - $1485.57
1996 Plymouth Grand VoyagerV6-3.8LService typeMass Airflow Sensor ReplacementEstimate$553.23Shop/Dealer Price$677.81 - $1029.00
1997 Plymouth Grand VoyagerV6-3.3LService typeMass Airflow Sensor ReplacementEstimate$654.89Shop/Dealer Price$804.88 - $1232.32
1993 Plymouth Grand VoyagerV6-3.3LService typeMass Airflow Sensor ReplacementEstimate$654.89Shop/Dealer Price$804.86 - $1232.28
1988 Plymouth Grand VoyagerL4-2.5LService typeMass Airflow Sensor ReplacementEstimate$463.95Shop/Dealer Price$566.22 - $850.47
1993 Plymouth Grand VoyagerV6-3.0LService typeMass Airflow Sensor ReplacementEstimate$771.53Shop/Dealer Price$950.68 - $1465.60
1998 Plymouth Grand VoyagerV6-3.0LService typeMass Airflow Sensor ReplacementEstimate$776.53Shop/Dealer Price$955.55 - $1470.36
1994 Plymouth Grand VoyagerV6-3.0LService typeMass Airflow Sensor ReplacementEstimate$776.53Shop/Dealer Price$955.92 - $1471.02
Show example Plymouth Grand Voyager Mass Airflow Sensor Replacement prices

What is the Mass Airflow Sensor all about?

The mass airflow sensor is a round tunnel made of plastic with a sensor attached inside. All cars take air from the outside and pass it into the engine through the air filter. The mass airflow sensor measures the amount of air entering the engine. For an engine to perform properly, it needs a specific amount of air-fuel mixture. The computer in the car reads the amount of air coming into the engine from the mass airflow sensor and then calculates the correct amount of fuel needed for proper engine performance. If the sensor goes bad, the engine will not know the right amount of fuel to add, causing problems including poor gas mileage, lack of power and more.

It is common for the mass airflow sensor to get dirty (if the air filter is dirty) and lose the ability to read the amount of air coming in the engine. If the vacuum hoses are leaking, it will give the same error code as mass airflow sensor failure.

When doing this job, the mechanic may recommend changing the electrical connector that connects the mass airflow sensor to the car's computer system. It is possible for the wires in the connector to break, causing the mass airflow sensor to not work.

Keep in mind:

  • Routinely changing your air filter can improve the lifespan of your mass airflow sensor
  • Often mass airflow sensors stop working because of bad connectors or wiring harnesses.
  • Anytime the mass airflow sensor is replaced, the air duct between the sensor and the intake manifold should be inspected.

How it's done:

  • Scan the computer in the car for codes.
  • Verify the problem.
  • Remove and replace the sensor if found faulty.
  • Check vacuum hoses for leaks and cracks.
  • Test drive the vehicle.

Our recommendation:

  • Changing the air filter on a regular basis will ensure that the car is getting cleaner air and hence performing optimally.
  • If the Check Engine light is on, get the car inspected as soon as you can.
  • If the Check Engine light is flashing, pull over and get the car towed to avoid costly repairs.
  • A mechanic should always inspect the vacuum hoses and snorkel attached to the mass airflow sensor when replacing it. It is possible for these items to have leaks. Replacing the sensor without fixing the leaks will not solve the problem.

What common symptoms indicate you may need to replace the Mass Airflow Sensor?

  • Check Engine light is on.
  • Car does not have power.
  • Excessive fuel consumption.
  • Car may not start.

How important is this service?

In order to run optimally, your vehicle needs to have a perfect fuel-to-air ratio. As the vehicle is moving, an uncontrollable amount of air enters the throttle body and heads into the intake manifold. As such, the fuel has to be adjusted to be optimal for the amount of air. The mass airflow sensor measures the mass of the air that is entering the vehicle, and sends the information to the car’s computer management system. This system then controls the amount of fuel that is injected into the cylinders, so that the ideal fuel-to-air ratio is achieved. When the mass airflow sensor stops working, the computer cannot receive information on the air intake, and the fuel-to-air ratio will be wrong. This will cause your engine to run poorly, and sometimes not at all. It will also impact your gas mileage.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Plymouth mechanics

Real customer reviews from Plymouth owners like you.

Excellent Rating

(50)

Rating Summary
46
2
0
0
2
46
2
0
0
2

Joel

21 years of experience
987 reviews
Joel
21 years of experience
Plymouth Grand Voyager V6-3.0L - Alternator - Jacksonville, Florida
Joel showed up on time and was quick to get started. He finished the job in about 40 minutes and the job was done right! He was very friendly and professional.

Carlos

16 years of experience
362 reviews
Carlos
16 years of experience
Plymouth Grand Voyager V6-3.3L - Alternator - Grand Prairie, Texas
Carlos replaced a blown alternator during freezing weather in a stiff wind and still smiled. Quick, thorough, great work ethic, good educator regarding car care, and just wonderful. A real "go to" guy for repairs.

Phillip

19 years of experience
310 reviews
Phillip
19 years of experience
Plymouth Grand Voyager V6-3.3L - Brake Pads Replacement (Front) - Sacramento, California
On time, went right to work and did an excellent job. No complaints here............

Javier

9 years of experience
10 reviews
Javier
9 years of experience
Plymouth Grand Voyager V6-3.3L - Power Steering Pump - Diamond Bar, California
He is doing a great job.

Excellent Rating

(50)

Rating Summary
46
2
0
0
2
46
2
0
0
2
Number of Plymouth Grand Voyager services completed
550+
services done by our mechanics
TOTAL NUMBER OF EXPERT Plymouth MECHANICS
100+
experts on our platform

Recent articles & questions

How to Buy Good Quality Sensors
Sensors Sensors for autos have many of the same characteristics that other types of sensors do – they are created to detect a signal, respond to chemical or physical variations such as distance or temperature. These signals are then converted...
Symptoms of a Bad or Failing Low Oil Level Sensor
Common signs include inaccurate oil readings, the Oil Light coming on for no reason, the car not starting, and the Check Engine Light coming on.
How Long Does an Evaporator Temperature Sensor (Switch) Last?
If If you have air conditioning in your vehicle, which pretty much all modern vehicles have, then you have an evaporator temperature sensor (switch). This switch plays an important role in making sure the correct temperature is attained, and that...

Speedometer stopped working

The vehicle speed sensor signal can be tested using a scanner since the signal will go to the engine control module and the speedometer. If the signal is good to the ECM, then you most likely have a bad speedometer....

What is the function of the crankshaft sensor in a 2005 Lincoln LS 3.9 liter v-8 ?

Hello - the crankshaft position sensor (CPS) provides an ignition timing reference information (https://www.yourmechanic.com/article/what-is-the-difference-between-conventional-electronic-and-distributor-less-ignition-systems) for the engine management for both ignition and fuel injection. Originally, the CPS provided only timing information for the ignition, replacing old-fashioned distributors. However, with newer,...

Fuel consumption issues after crankshaft position sensor reset

Hello. If your lights are coming on and off then there may still be an issue somewhere with the vehicle. If there was a recent reset due to an issue with the crank position sensor it may be possible that...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com