Plymouth Colt Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(156)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(156)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Plymouth Colt Power Steering Pressure Hose Replacement is $170 with $75 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Plymouth ColtL4-1.5LService typePower Steering Pressure Hose ReplacementEstimate$538.29Shop/Dealer Price$654.12 - $979.09
1984 Plymouth ColtL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$245.67Shop/Dealer Price$293.36 - $413.88
1985 Plymouth ColtL4-1.5LService typePower Steering Pressure Hose ReplacementEstimate$518.29Shop/Dealer Price$634.13 - $959.12
1977 Plymouth ColtL4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$245.67Shop/Dealer Price$293.34 - $413.84
1984 Plymouth ColtL4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$245.67Shop/Dealer Price$293.37 - $413.91
1994 Plymouth ColtL4-1.5LService typePower Steering Pressure Hose ReplacementEstimate$518.29Shop/Dealer Price$634.13 - $959.12
1987 Plymouth ColtL4-2.0LService typePower Steering Pressure Hose ReplacementEstimate$250.67Shop/Dealer Price$298.22 - $418.64
1990 Plymouth ColtL4-1.6LService typePower Steering Pressure Hose ReplacementEstimate$250.67Shop/Dealer Price$298.59 - $419.30
Show example Plymouth Colt Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Plymouth mechanics

Real customer reviews from Plymouth owners like you.

Excellent Rating

(156)

Rating Summary
143
5
1
1
6
143
5
1
1
6

Nate

21 years of experience
90 reviews
Nate
21 years of experience
Plymouth Colt L4-1.5L - Car is not starting - Austell, Georgia

Jason

17 years of experience
429 reviews
Jason
17 years of experience
Plymouth Colt L4-1.5L - Oil or Fluid is leaking - San Jose, California
Excellent mechanic!! Get's an A+ from us. Quality work, very personable. Would not hesitate to use him again!! (Forgot to put a rating in right after the work was done, so I am doing it now. The repair was done a while ago.... still running great with no problems. Fixed the problem and after all this time is still running well!!)

Javier

11 years of experience
59 reviews
Javier
11 years of experience
Plymouth Voyager V6-3.3L - Bleed Brakes - Las Vegas, Nevada
Wonderful.

Lucas

21 years of experience
885 reviews
Lucas
21 years of experience
Plymouth Voyager L4-2.4L - Starter - Sherman Oaks, California
Lucas is a very friendly and courteous guy, Diagnosed accurately and did the repair with the correct part the next day . I am very happy and will use the service again if needed

Excellent Rating

(156)

Rating Summary
143
5
1
1
6
143
5
1
1
6
Number of Plymouth services completed
1716+
services done by our mechanics
TOTAL NUMBER OF EXPERT Plymouth MECHANICS
100+
experts on our platform

Recent articles & questions

P0071 OBD-II Trouble Code: Ambient Air Temperature Sensor Range/Performance
P0071 P0071 code definition Ambient Air Temperature Sensor Range/Performance Issue Depending on the type of vehicle these are some related OBD-II Diagnostic Trouble Codes: P0070: Ambient Air Temperature Sensor Circuit P0072: Ambient Air Temperature Sensor Circuit Low Input P0073: Ambient...
P0309 OBD-II Trouble Code: Cylinder 9 Misfire Detected
P0309 means one of the engine cylinders is not firing properly due to a faulty coil, or sensor, spark plug, wiring, fuel injector or low fuel level.
B1904 OBD-II Trouble Code: Air Bag Crash Sensor #2 Feed/Return Circuit Failure
B1904 means there is a circuit malfunction in the #2 airbag crash sensor, likely due to damaged electrical components or a bad sensor.

How do I know when my wheel bearings are going out?

Your accessory and serpentine belts may squeak or chirp a bit in cold weather due to the fact that the belts become brittle and less pliable during the cold weather months. When they go from a cold stand still to...

Bmw will not go over 20 mph

This may be a sign of a vacuum leak. High idle speeds or in some cases rough idle, stalling and hissing sounds are common signs of a vacuum leak. When a vacuum leak is present in an engine, this causes...

I drive a 2003 dodge grand caravan 3.0 engine front wheel drive and when i get above 40 miles an hour and go to slow down it shifts down hard

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com