Plymouth Acclaim Throttle Body Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Throttle Body Replacement Service

How much does a Throttle Body Replacement cost?

On average, the cost for a Plymouth Acclaim Throttle Body Replacement is $470 with $330 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1995 Plymouth AcclaimV6-3.0LService typeThrottle Body ReplacementEstimate$1518.66Shop/Dealer Price$1863.18 - $2888.62
1992 Plymouth AcclaimL4-2.5LService typeThrottle Body ReplacementEstimate$835.55Shop/Dealer Price$1009.77 - $1528.32
1995 Plymouth AcclaimL4-2.5LService typeThrottle Body ReplacementEstimate$835.55Shop/Dealer Price$1009.80 - $1528.36
1992 Plymouth AcclaimV6-3.0LService typeThrottle Body ReplacementEstimate$1509.65Shop/Dealer Price$1852.42 - $2876.56
1990 Plymouth AcclaimV6-3.0LService typeThrottle Body ReplacementEstimate$1509.65Shop/Dealer Price$1853.90 - $2879.14
1994 Plymouth AcclaimL4-2.5LService typeThrottle Body ReplacementEstimate$818.07Shop/Dealer Price$988.09 - $1493.65
1994 Plymouth AcclaimV6-3.0LService typeThrottle Body ReplacementEstimate$1509.65Shop/Dealer Price$1852.44 - $2876.59
1993 Plymouth AcclaimL4-2.5LService typeThrottle Body ReplacementEstimate$818.07Shop/Dealer Price$987.95 - $1493.40
Show example Plymouth Acclaim Throttle Body Replacement prices

What is the throttle body and how does it work?

The throttle body is an air metering device mounted between the air filter and snorkel, and the intake plenum. Within the throttle body is a movable throttle plate whose position controls the amount of air that enters the engine to determine engine speed. Throttle body designs vary. Some incorporate an idle air control valve, throttle position sensor, and other electronic throttle controls. The throttle plate in the throttle body can be controlled directly by an accelerator pedal cable or fully electronically in the newest drive-by-wire systems.

When to consider replacing the throttle body:

  • Check engine light and/or reduced power warning light is on. Most modern throttle bodies have electrical components, such as a throttle position sensor. These components are monitored by the powertrain control module (PCM). If the check engine light or reduced power warning light comes on, a mechanic will determine if any of the stored trouble codes implicate a throttle body malfunction.
  • Wrong idle speed. Carbon deposits in the throttle body, particularly around the movable throttle plate or in the idle air control valve, can cause the engine idle speed to be too low or too high.
  • Poor transmission shifting. In some applications, transmission shift timing relies on signal outputs from the throttle body. If the throttle position sensor is defective, that might adversely affect shift timing and feel.

How do mechanics replace the throttle body?

  • The engine cover is removed, if necessary.
  • The flexible rubber snorkel from the air filter housing to the throttle body is disconnected. Typically, the connection is made with a large stainless steel hose clamp.
  • The electrical connections to the throttle body are removed.
  • If the throttle body is not a drive-by-wire system, the accelerator cable and cruise control cable are disconnected and set aside.
  • The bolts retaining the throttle body to the plenum, the gasket, and the throttle body are removed. If the throttle body is being cleaned and tested for re-use, approved chemicals are used in the cleaning process.
  • The new or serviced throttle body is re-attached to the plenum and the bolts torqued to factory specifications.
  • All cables and electrical connections are restored. The intake air snorkel is reconnected.
  • If applicable, the electronic throttle installation and idle re-learn procedures are performed using an appropriate scan tool.
  • Finally, the engine is started, brought to normal operating temperature, and idle speed is checked. The car is road tested to ensure normal operation and no illumination of warning or service lights.

Is it safe to drive with a throttle body problem?

Yes. But, the vehicle may be limited in power or put into what is referred to as limp mode, in order to get the vehicle to a repair facility. If the check engine light is on, or the electronic throttle control warning light is on, but there is no noticeable difference in engine performance, the car can be safely driven. However, it is best to have it diagnosed and repaired at your earliest convenience to avoid unexpected breakdown or possible damage to the catalytic converter.

When replacing the throttle body keep in mind:

  • Many modern throttle bodies have spring loaded sensors and plastic gears that are not intended to be manipulated directly during any diagnostics or inspections. These components are controlled electronically or generate signals. It is best to let a mechanic use approved tests to diagnose the problem.
  • Wiring faults, bad grounds, or bad terminal connections can make it appear as though an electronically controlled throttle has failed. A mechanic will always rule out all other causes before replacing the throttle body.
  • When cleaning the throttle body, special care should be taken to use only special spray cleaners designed to not damage electrical components or sensors.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Plymouth mechanics

Real customer reviews from Plymouth owners like you.

Excellent Rating

(6)

Rating Summary
5
0
0
1
0
5
0
0
1
0

Jose

18 years of experience
433 reviews
Jose
18 years of experience
Plymouth Acclaim V6-3.0L - Brakes, Steering and Suspension System - Vancouver, Washington
Friendly and knowledgeable. Found the issue with our brakes fast and got us safe and back on the road. He's our new mechanic!

Chris

21 years of experience
448 reviews
Chris
21 years of experience
Plymouth Acclaim V6-3.0L - Oil/Fluid Leak - Vancouver, Washington
Chris was on time, professional and personable. Definetly have him come back again. Thanks Chris!!

David

38 years of experience
39 reviews
David
38 years of experience
Plymouth Acclaim V6-3.0L - Car AC Repair - Austin, Texas
very pleasant,i am very satisfied with the job he done and information that he gave me , he is a professional a/c man!!!!!!!!!!!!!1

Andrew

16 years of experience
657 reviews
Andrew
16 years of experience
Plymouth Acclaim L4-2.5L - Car is not starting Inspection - Portland, Oregon
Very helpful and knowledgeable.

Excellent Rating

(6)

Rating Summary
5
0
0
1
0
5
0
0
1
0
Number of Plymouth Acclaim services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Plymouth MECHANICS
100+
experts on our platform

Recent articles & questions

Rules of the Road For Missouri Drivers
Driving Driving requires knowledge of the myriad rules of the road. While you may be familiar with the ones you are required to follow in your own state, there are some that may be different in other states. While the...
How to Get a Kansas Driver's Permit
Kansas Kansas requires that all new drivers participate in a Graduated Driver Licensing program. The first step in this program is to obtain a learner’s permit, that graduates to a full license as the driver gains experience and age, to...
Symptoms of a Bad or Failing Anti-Lock Relay
If your Check Engine or ABS Lights turn on, or you experience unexpected wheel lock, you may need to replace the anti-lock relay.

Thumping noise from front end

Hello. You likely are experiencing a problem with a hub bearing. I would also recommend having your brakes checked. If you need assistance with a repair, consider YourMechanic, as a certified mechanic will be able to come to your home...

Looking to replace my rear breaks

Basically, if you are concerned about the quality, suitability, durability, and proper function of a replacement part on a modern motor vehicle, and you should be, the only acceptable practice is to use dealer OEM parts. To select parts using...

Please help

Hi there. It's possible that you may have installed the wrong sized thermostat, or if you didn't replace the thermostat housing at the same time, this is what's causing your problems. Without being there to see exactly what your issue...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com