logo

Oldsmobile Delta 88 Wheel Bearings Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(12)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

See availability

Customer Ratings

(12)

Wheel Bearings Replacement Service

How much does a Wheel Bearings Replacement cost?

On average, the cost for a Oldsmobile Delta 88 Wheel Bearings Replacement is $162 with $22 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1990 Oldsmobile Delta 88V6-3.8LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$353.36Shop/Dealer Price$406.55 - $558.02
1990 Oldsmobile Delta 88V6-3.8LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$386.27Shop/Dealer Price$448.17 - $629.76
1990 Oldsmobile Delta 88V6-3.8LService typeWheel Bearings - Driver Side Front ReplacementEstimate$344.35Shop/Dealer Price$395.80 - $545.96
1990 Oldsmobile Delta 88V6-3.8LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$386.27Shop/Dealer Price$448.20 - $629.80
1991 Oldsmobile Delta 88V6-3.8LService typeWheel Bearings - Passenger Side Front ReplacementEstimate$344.35Shop/Dealer Price$397.27 - $548.54
1991 Oldsmobile Delta 88V6-3.8LService typeWheel Bearings - Driver Side Rear ReplacementEstimate$386.27Shop/Dealer Price$448.34 - $630.05
1991 Oldsmobile Delta 88V6-3.8LService typeWheel Bearings - Driver Side Front ReplacementEstimate$344.35Shop/Dealer Price$395.81 - $545.99
1991 Oldsmobile Delta 88V6-3.8LService typeWheel Bearings - Passenger Side Rear ReplacementEstimate$386.27Shop/Dealer Price$448.20 - $629.80
Show example Oldsmobile Delta 88 Wheel Bearings Replacement prices

What are wheel bearings and how do they work?

A wheel bearing assembly consists of rolling elements, such as hardened steel ball bearings or roller bearings, that roll on and around hardened steel bearing races. The wheel bearings support the front and rear axle, and all the weight of your car. Wheel bearings are made with a high-precision technique using extremely hard steel in order to withstand all the normal impacts that occur to the wheel and tire assembly as you drive along the road.

When to replace wheel bearings?

  • Growling or grinding noise from a wheel. Failed or failing wheel bearings make a very characteristic growling noise which will grow louder as the bearing wear progresses. If you believe the wheel bearing noise is coming from one side of the car, you can self-diagnosis your wheel bearing as you drive the car by loading and unloading vehicle weight You can do this by “swerving” from side-to-side. For example, if the noise markedly increases when you swerve to left, which shifts the vehicle’s weight to the right, then it often indicates the wheel bearing on the right is failing.

  • Axial or radial play in the wheel or wheel hub. Should the wheel hub move up and down or in and out, the bearing may be worn.

  • Vibration in the steering wheel or vehicle body and/or wandering. Vibration and lack of directional stability could be consequences of loose or worn out wheel bearings.

  • Tire and wheel assembly does not turn smoothly. With the wheel jacked up, and the car not in gear, the wheel should rotate smoothly. Rough or inconsistent movement, which is often accompanied by noise, can signify damaged bearings. Be sure the brakes are not dragging as you perform this check.

How do mechanics replace wheel bearings?

The complexity of wheel bearing replacement varies greatly depending on the vehicle make, model, year, the wheel position (front versus rear), and the drive type (AWD versus FWD):

  • On vehicles with unitized wheel bearing/hub assemblies, the brake rotor and caliper are removed.
  • The large axle nut is removed, the axle is pushed back through the center of the unitized hub assembly, and three (or more) bolts holding the hub assembly to the steering knuckle are removed.
  • The hub assembly is then removed from the knuckle. On installation of the new hub assembly to the knuckle, the bolts are torqued to the factory specification. In many cases, it is required to discard the old axle nut and replace with a new one. Special attention must be given to tightening the axle nut to the exact factory specification because over or under-tightening can damage the newly installed bearing. All YourMechanic professionals use calibrated torque wrenches on these critical fasteners.
  • Finally, the brake rotor and brake caliper are re-attached, the wheel installed and the car is road tested.
  • On vehicles where the wheel bearing is pressed into a cavity within the steering knuckle, the steering knuckle must be removed from the vehicle in order to press out the old bearing and press in the new bearing.
  • On some vehicles, the wheel bearing is pressed onto an axle shaft and thus the axle must be extracted from the axle carrier. This will apply to certain trucks.

Is it safe to drive with a wheel bearing problem?

No. Wheel bearing failure is usually gradual, although in some cases it starts immediately after the dramatic impact of the wheel and tire assembly with a deep pothole. Wheel bearings can sometimes make noise for quite some time before you experience a catastrophic failure that would result in complete separation of the wheel and tire assembly from the axle. Generally, the risk of sudden failure increases with the noise level. But strictly speaking, once the bearing has started to fail it is impossible to predict exactly when it will fail completely. So it should not continue to be driven. Were a failing bearing to seize or break while you are moving, you could experience loss of control of the vehicle. Once you receive a conclusive diagnostic that a wheel bearing has failed, replace the bearing promptly.

When replacing wheel bearings, keep in mind:

  • If the car has a substantial number of miles on the failed bearing (100,000 miles or more), it is a good idea to replace both bearings (driver and passenger) on the axle at the same time.
  • Wheel bearing noise can be confused with tire noise from defective tires. In difficult cases, a mechanic will apply remote wireless microphones at all 4 wheel positions, and then drive the car while listening to a remote receiver, switching between wheel positions to pinpoint the location of the failed bearing.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee

Number of Oldsmobile Delta 88 services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(12)
Rating Summary
11
0
0
1
0
11
0
0
1
0

Chris

23 years of experience
2372 reviews
Request Chris
Chris
23 years of experience
Request Chris
by Matt
Oldsmobile Delta 88 V6-3.8L - Adjust Drive Belts - Laguna Hills, California
Chris was on scheduled time, he corrected my car's problem. I will definitely use your services in the future. Your company is now in my Bookmarks and I will recommend your services to my friends.

Hugh

12 years of experience
159 reviews
Request Hugh
Hugh
12 years of experience
Request Hugh
by Robin
Oldsmobile Delta 88 V6-3.8L - Battery - Littleton, Colorado
Conscientious, considerate and knowledgeable. Performed the work well and saved me money from unnecessary things I thought I needed. “Sometimes we get lucky”, he said. Highly recommended.

Chris

23 years of experience
2372 reviews
Request Chris
Chris
23 years of experience
Request Chris
by Matt
Oldsmobile Delta 88 V6-3.8L - Ignition Lock Assembly - Laguna Hills, California
Great mechanic with a pleasant attitude.............he definitely knows his business!!

Kenneth

21 years of experience
870 reviews
Request Kenneth
Kenneth
21 years of experience
Request Kenneth
by Gregory
Oldsmobile Delta 88 V8-5.7L - Battery - Torrance, California
Kenneth was very punctual, professional and helpful. He fixed the problem and helped walk me through his inspection and identify other improvements need. I would definitely recommend him!

Excellent Rating

(12)
Rating Summary
11
0
0
1
0
11
0
0
1
0
Number of Oldsmobile Delta 88 services completed
132+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform
Yourmechanic was featured in

New York Times NBC CBS Forbes INC Tech Crunch

Learn more about us

Recent articles & questions

10 Ways to Lower Your Auto Insurance Bill
Our best tips: Opt for a higher deductible, pay the premium in full, secure a covered parking spot, and maintain a high credit score.
Read more
What Causes an Exhaust Manifold to Crack or Leak?
Your car has two manifolds – an intake manifold and an exhaust manifold. Both serve essential purposes, but the one most likely to...
Read more
Connecticut Parking Laws and Colored Pavement Markings
While While there are certainly plenty of rules and laws to remember when you are behind the wheel and on the road in Connecticut, you also have to keep in mind the parking laws, as well as the colored pavement...
Read more

Broken axle

It is not the axle since the axle on the car is in the rear of the car. You may have heard the brakes (https://www.yourmechanic.com/article/how-to-diagnose-and-repair-noisy-brakes-by-robert-tomashek) or a bearing (https://www.yourmechanic.com/article/symptoms-of-bad-or-failing-wheel-bearings) in the front of the car. Depending on the problem you...
Read more

Do the rotors needs to be replaced with the brake pads?

All Mercedes manuals recommend replacing the brake pads and rotors in sets. The rotors cannot be resurfaced due to material used in the rotors. The rotors are made of softer materials than most vehicles and wear more and should be...
Read more

Can I get my exhaust manifold replaced without replacing the catalytic converter?

Hi There, Yes, an exhaust manifold (https://www.yourmechanic.com/services/exhaust-manifold-replacement) is a separate component of the exhaust system that is mounted to the engine cylinder head. As the exhaust travels from the engine, it passes through the exhaust manifold and then through the...
Read more
  1. Home
  2. Estimates
  3. Oldsmobile
  4. Delta 88
  5. Wheel Bearings Replacement

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com

Read FAQ
GET A QUOTE