Oldsmobile Cutlass Supreme Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(44)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(44)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Oldsmobile Cutlass Supreme Power Steering Pressure Hose Replacement is $212 with $72 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1992 Oldsmobile Cutlass SupremeV6-3.4LService typePower Steering Pressure Hose ReplacementEstimate$969.84Shop/Dealer Price$1103.34 - $1478.71
1995 Oldsmobile Cutlass SupremeV6-3.4LService typePower Steering Pressure Hose ReplacementEstimate$596.87Shop/Dealer Price$638.63 - $751.12
1992 Oldsmobile Cutlass SupremeV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$661.51Shop/Dealer Price$719.51 - $880.54
1990 Oldsmobile Cutlass SupremeL4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$619.49Shop/Dealer Price$736.26 - $1081.96
1993 Oldsmobile Cutlass SupremeV6-3.4LService typePower Steering Pressure Hose ReplacementEstimate$941.91Shop/Dealer Price$1074.57 - $1449.32
1990 Oldsmobile Cutlass SupremeV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$358.59Shop/Dealer Price$413.74 - $574.69
1991 Oldsmobile Cutlass SupremeL4-2.3LService typePower Steering Pressure Hose ReplacementEstimate$649.93Shop/Dealer Price$774.32 - $1142.88
1993 Oldsmobile Cutlass SupremeV6-3.1LService typePower Steering Pressure Hose ReplacementEstimate$661.51Shop/Dealer Price$719.50 - $880.53
Show example Oldsmobile Cutlass Supreme Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(44)

Rating Summary
38
3
0
0
3
38
3
0
0
3

Peter

28 years of experience
86 reviews
Peter
28 years of experience
Oldsmobile Cutlass Supreme V6-3.1L - Battery - Fresno, California
Great experience! Was very impressed with Peters integrity level!

Collins

13 years of experience
678 reviews
Collins
13 years of experience
Oldsmobile Cutlass Supreme V6-3.1L - Starter - Marietta, Georgia
Collinss showed up on time was very professional got right to work and was done on time.

Jose

18 years of experience
433 reviews
Jose
18 years of experience
Oldsmobile Cutlass Supreme V6-3.1L - Inspection / Diagnostics - Portland, Oregon
Don't know for sure if diagnose is correct as repair not booked yet.i did agree to what he thinks problem is.just wish could be 100% sure before spending more money.

Trung

13 years of experience
412 reviews
Trung
13 years of experience
Oldsmobile Cutlass Supreme V6-3.1L - Car is not starting - San Jose, California
Trung did a great job and went above and beyond to help me get back on the road.

Excellent Rating

(44)

Rating Summary
38
3
0
0
3
38
3
0
0
3
Number of Oldsmobile Cutlass Supreme services completed
484+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

10 Best Stores to Buy Auto Parts in Tucson, Arizona
Automotive technicians rely on auto parts stores to add and replace car parts. The best auto parts shop in Tucson is O’Reilly Auto Parts.
How Long Does an Oil Pump Cover Gasket Last?
In In order for the oil in your car to get to where it needs to go, it will need the right amount of pressure. There are a number of different systems and parts on a car that help to...
Child Seat Safety Laws in North Carolina
In In North Carolina, everyone in a motor vehicle is required by law to either wear a seat belt or be restrained properly in a child safety seat. This is just common sense, because restraints save lives. Whether you are...

Car would not respond when I turned the key...Tried 2 or 3 times same...came back 1/2 hour it is fine.

Hello! An intermittent failure of a start response can be many things - a bad ignition switch (https://www.yourmechanic.com/services/ignition-switch-replacement), starter solenoid (https://www.yourmechanic.com/services/starter-replacement), or in your case - the keys use a "raised-chip" design for security. With years of wear, the key/ignition...

Oil change from regular oil to synthetic oil

Using the synthetic oil will not harm your motor or seals in any way as long as the oil weight is the same as recommended by manufacturer. You can keep using this oil until next oil change where you can...

Transmission problem?

Hi There, What you are describing sounds like possibly low transmission fluid (https://www.yourmechanic.com/services/transmission-fluid-service) or a bad speed sensor or potentially a faulty transmission control module, which also controls the speed sensors. The transmission control module has various sensors such as...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com