Oldsmobile Custom Cruiser Oil Pressure Light is on Inspection at your home or office.

outstanding service from Dwaine. I'm very pleased .

The mobile mechanic came. I must say I am impressed! He found my house. He and I started talking. He said he owned two Ninety Eights previously. He was there to look at my Oldsmobile Ninety Eight. He had two Oldsmobile Ninety Eight Touring Sedans. The ones he owned were from the 1987-1990 era. He was describing the floor shifters and they had and how much he liked Ninety Eights, Touring Sedans, and the Oldsmobile Eighty Eight LSS too. He talked about how a family member owned one and how he was fixing his. He talked in detail about the Touring Sedan and the things he loved. He asked me how long had I owned my Ninety Eight. I told him 2003. He told me how he become a mechanic and went to school for it and more. He got into the Ninety Eight and it would not start. He got out and disconnected the battery and rubbed the negative and positive battery terminals together. He reconnected them and the Ninety Eight started! The instrumentation then told him exactly what it was. There is a sensor at the bottom of the oil pan. He said by doing what he did with the terminals, it cleared the computer and reset it. We went underneath the car and he showed me the sensor. He said which one did you replace? I told him. He said you were on the right path. You know what you are doing. You need to replace this sensor and not the one you did. You can get the sensor and replace it because it is clear you know what you are doing and on the right path. He said you also need to replace your valve cover gaskets. They are leaking. I told him I will request him to come back and do that. I am not doing that even thought I can.

They just sent an email saying the mechanic is on his way. It is only 8:12 am! He is off to a good start. He is supposed to arrive between 9:00-9:30 am. He arrived well before that time! It was not 9:00 am yet! He did a diagnostic and he checked all the work I did. He said I did great work with everything I did. He said the car is very good shape. He said this car is indeed a runner! He checked everything. He checked all the fuses and relays too. He did a complete diagnostic too. He checked fuel pressure, oil pressure, and more. He found out what it was. It had nothing to do with oil pressure or anything. The fuel pump is going out. When he came the car started right up. He said they never go totally out. He said that is why it started when it did. He connected tools I do not have to the Ninety Eight. It is not getting any fuel pressure, and this is why it shut off all the times it did. He fixed one of the spark plug wires too. It was burnt. He jacked the Ninety Eight up and got underneath and checked the wires, the oil pressure sensor/switch and oil level sender for everything and the connections and made sure they have power and were installed correctly. He said the engine uses oil pressure along with the fuel pressure to start. The fuel pressure is non existent and that is why it would not start. After all of that, he looked at the Oldsmobile Toronado, my other car . He got the air conditioner to work again. He said the compressor bolt was loose and he tightened it up. He used this huge screw driver device and bent it back in place. He said the shims were loose and he bent them back. It cools just fine now. We turned it on and off several times testing it. He checked the pressure and it was filled with refrigerant. He checked the relays and the fan too. It was all fine. He said it is clear you take care of both of your cars. He said one thing I will not do is guess and I like to know what is indeed wrong. He said your cars are in good shape. He said you do not need valve cover gaskets. There is no leak. I booked him to return to install the fuel pump I need. I look forward to seeing him again soon in a few weeks. Today only cost me 70.00. That's it.

Ian was absolutely amazing. So friendly, kind, knowledgeable, efficiently communicative, and very pleasant to work with. He was able to complete the work without any problems and I know the work is done right the 1st time. THANK YOU IAN!!!