Oldsmobile Achieva Fuel Injector Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(6)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(6)

Fuel Injector Replacement Service

How much does a Fuel Injector Replacement cost?

On average, the cost for a Oldsmobile Achieva Fuel Injector Replacement is $656 with $516 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1994 Oldsmobile AchievaL4-2.3LService typeFuel Injector ReplacementEstimate$1357.60Shop/Dealer Price$1661.85 - $2566.50
1998 Oldsmobile AchievaL4-2.4LService typeFuel Injector ReplacementEstimate$1348.59Shop/Dealer Price$1651.07 - $2554.40
1997 Oldsmobile AchievaV6-3.1LService typeFuel Injector ReplacementEstimate$2218.75Shop/Dealer Price$2679.92 - $4052.12
1996 Oldsmobile AchievaL4-2.4LService typeFuel Injector ReplacementEstimate$1363.19Shop/Dealer Price$1665.88 - $2569.36
1995 Oldsmobile AchievaV6-3.1LService typeFuel Injector ReplacementEstimate$2218.75Shop/Dealer Price$2683.89 - $4059.07
1995 Oldsmobile AchievaL4-2.3LService typeFuel Injector ReplacementEstimate$1182.19Shop/Dealer Price$1443.24 - $2221.89
1997 Oldsmobile AchievaL4-2.4LService typeFuel Injector ReplacementEstimate$1363.19Shop/Dealer Price$1665.90 - $2569.40
1993 Oldsmobile AchievaV6-3.3LService typeFuel Injector ReplacementEstimate$1497.51Shop/Dealer Price$1833.78 - $2838.00
Show example Oldsmobile Achieva Fuel Injector Replacement prices

What is a fuel injector and how does it work?

A fuel injector is a fuel metering device that sprays atomized droplets of fuel in a specific pattern into the engine’s intake manifold or directly into the combustion chamber. The injector has a solenoid and valve within and the operation, or pulsing, of the solenoid is controlled by the powertrain control module (PCM). The PCM controls the solenoid’s “on” time in order to keep the air-fuel ratio optimized while the engine load and operating conditions constantly change. Fuel injectors are usually connected to a fuel rail located on the top of the engine and the fuel rail, in turn, is supplied with fuel under pressure from the fuel pump located in the fuel tank.

When to consider replacing a fuel injector:

  • Rough idle, loss of power, or misfiring. Poor engine operation has many causes but faults in the fuel injection system, including the fuel injectors, are high on the list of possibilities.
  • Odor of raw gas or visible leaks. Fuel injectors should not leak fuel into the intake manifold when the car is off. If you notice any fuel odor around your car, the possibility of a leaking fuel injector should be considered. There should be no external leak from a fuel injector. If an externally-leaking injector is suspected, do not start your car due to the fire hazard.
  • Check engine light. Some fuel injection failures, for example, a faulty solenoid, may cause a trouble code to be set in the PCM and that will cause the check engine light to illuminate. The codes are read and the fuel injector is tested directly, as needed.
  • Major engine repairs, engine replacement, or lengthy storage. All fuel injectors will have deposits given enough mileage. These deposits can cause an imbalance in the performance of the injectors from cylinder to cylinder. When an engine is already disassembled, or if you are installing a new engine, that is a perfect time to service the injectors as a set. All injectors have tiny internal filter baskets. A professional injector service facility will clean each injector ultrasonically and replace these filters for a relatively low cost.

How do mechanics replace a fuel injector?

Injectors can be serviced once removed from the car or replaced outright with new injectors. If the injectors are serviced, specialized cleaning and test equipment are required. The choice to repair versus replace will depend on exactly what is wrong with the injector as well as customer preference. Either option requires removing the injector from the car and the following procedure is typical:

  • Once the engine is cold, the pressure within the fuel rail is relieved by briefly running the engine with the fuel pump fuse out.
  • The upper plenum on the intake manifold is removed along with any cables, hoses, or wiring that restricts access.
  • The supply and return lines are removed from the fuel rail. The electrical connectors to each fuel injector are unlocked and removed. The fuel rail is then unbolted and removed from the intake manifold.
  • The injector(s) requiring replacement are removed from the fuel rail, taking care to not allow any debris to enter the exposed openings. An O-ring seal usually holds the injector very firmly in a finely polished bore in the fuel rail.
  • Using a new O-ring, the serviced or replaced injector is re-inserted into the fuel rail — using engine oil on the O-ring to prevent damaging it. O-rings in this application fit very tight to prevent fuel leaks.
  • The fuel rail is re-installed and the supply and return lines are re-connected. The plenum is re-installed along with all cables, hoses, or wiring.
  • Finally, the engine is run, there is a careful check for leaks, and the vehicle is road tested.

Is it safe to drive with a fuel injector problem?

Yes, so long as there is no external leak of fuel from a broken or malfunctioning injector, it is safe to drive the car. However, if the injector is known to be malfunctioning, it can cause engine misfires, excessive emissions or, in the case of a badly leaking injector, can overload and overheat the catalytic converter. Additionally, fuel efficiency will always be diminished if the fuel injectors are not working properly.

When replacing a fuel injector keep in mind:

  • Using high quality (Tier One) gasoline may reduce deposits on fuel injectors and prolong their life.
  • If an injector problem develops that requires removal of one injector, the best practice is to remove and service all of the injectors at the same time. That service might involve replacement of the electrically failed injector along with off-the-car cleaning of the remaining injectors. Serving all injectors at once ensures the injector set will be balanced, in terms of flow rates, and in turn promote smooth operation of the engine.
  • Do not use fuel system cleaning compounds, or procedures, unless such materials are specified by the manufacturer of your car.
  • On the car cleaning of fuel injectors is not as effective as off-the-car cleaning because injectors have tiny internal filter baskets that should be replaced as part of the process of servicing a fuel injector.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(6)

Rating Summary
4
0
1
0
1
4
0
1
0
1

Ricardo

24 years of experience
199 reviews
Ricardo
24 years of experience
Oldsmobile Achieva V6-3.1L - Blower Motor Relay - Miami, Florida
Always punctual, knowledgeable, patient with all of my questions. He does a great job. I will continue to book him for any future repairs to my car.

Ryan

19 years of experience
62 reviews
Ryan
19 years of experience
Oldsmobile Achieva L4-2.4L - Car is not starting - Ogden, Utah
Seemed to definitely know what he was talking about. Was right on time. Really friendly.

Kenneth

21 years of experience
870 reviews
Kenneth
21 years of experience
Oldsmobile Achieva V6-3.1L - Car is not starting - Los Angeles, California
Inspected car for starting problems but could not check engine light on

Tyrone

20 years of experience
105 reviews
Tyrone
20 years of experience
Oldsmobile Achieva L4-2.4L - Oil Change - Houston, Texas
It was a highly enjoysble experience with a young man who is personable, a gigted mechanic, and a true professional!!!

Excellent Rating

(6)

Rating Summary
4
0
1
0
1
4
0
1
0
1
Number of Oldsmobile Achieva services completed
66+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

P0789 OBD-II Trouble Code: Shift/Timing Solenoid Intermittent
P0789 code means there is an issue with the gear ratio within the vehicle often due too a faulty shift solenoid or transmission blockages.
How to Replace an Ignition Trigger
The ignition trigger fails if the engine is misfiring or has trouble starting. The check engine light may illuminate if the ignition trigger fails.
How Long Does a Supercharger Belt Last?
Both Both superchargers and turbochargers are used on today’s vehicles to provide extra power and performance. While they do essentially the same thing (injecting additional air into the intake), they work in different ways. Turbochargers work based on exhaust, which...

Car overheating

You still could have a blown head gasket (https://www.yourmechanic.com/article/how-to-replace-a-head-gasket-by-jerel-lawrence). Sometimes the compression blows into the radiator. A mechanic can check to see if pressure is pushed into the radiator from the engine having a blown head gasket or a cracked...

I have a 2000 Chevy blazer won't go in 4wD.

There is a device on the transfer case that makes the mechanical engagement that allows power to be transferred to the front wheels. If the power and ground signals are present here and there is no engagement, suspect the actuator....

I have a 2011 ford focus and this past weekend, it stopped running. It would sound like the [engine](/topics-engine-ford/) was trying to turn over but then it would die. We checked the computer and no codes were thrown. When I put into reverse or neutral, it wouldn't even turn over. It only gets to turn o It only tries to turn over in park. Battery was just replaced recently

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com