Oldsmobile 98 Power Steering Pressure Hose Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(34)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(34)

Power Steering Pressure Hose Replacement Service

How much does a Power Steering Pressure Hose Replacement cost?

On average, the cost for a Oldsmobile 98 Power Steering Pressure Hose Replacement is $212 with $72 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1993 Oldsmobile 98V6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$513.86Shop/Dealer Price$579.06 - $760.06
1991 Oldsmobile 98V6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$570.64Shop/Dealer Price$633.57 - $812.88
1995 Oldsmobile 98V6-3.8L TurboService typePower Steering Pressure Hose ReplacementEstimate$380.85Shop/Dealer Price$441.42 - $618.96
1996 Oldsmobile 98V6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$328.31Shop/Dealer Price$375.75 - $513.88
1994 Oldsmobile 98V6-3.8L TurboService typePower Steering Pressure Hose ReplacementEstimate$380.85Shop/Dealer Price$442.90 - $621.54
1993 Oldsmobile 98V6-3.8L TurboService typePower Steering Pressure Hose ReplacementEstimate$380.85Shop/Dealer Price$441.56 - $619.21
1992 Oldsmobile 98V6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$497.64Shop/Dealer Price$559.73 - $738.40
1995 Oldsmobile 98V6-3.8LService typePower Steering Pressure Hose ReplacementEstimate$380.85Shop/Dealer Price$441.42 - $618.96
Show example Oldsmobile 98 Power Steering Pressure Hose Replacement prices

What is the power steering pressure hose and how does it work?

The power steering pressure hose transfers the high-pressure hydraulic output of the power steering pump to either a steering gear box or steering rack and pinion unit to create the power assist that you rely on when you turn the steering wheel. The pressure hose is only used in cars with a power steering pump and reservoir, so if you have a newer car you may have electric power steering instead. The pressure hose is relatively large in diameter in order to withstand high hydraulic pressure, flex as the engine moves and vibrates, and also withstand engine heat, accidental cuts, and abrasion.

When to the consider replacing the power steering pressure hose:

  • Groaning, whirring noise or difficulty steering. Noise, or difficulty turning the steering wheel, may reflect a low power steering fluid level, which could be due to a leak in a pressure hose, or a leak elsewhere in the power steering system. Although a leak in the pressure hose is a possible cause of a low fluid level, a mechanic will consider all other possible causes, too.
  • Visible fluid leaks. There are usually steel ferrules clamped onto each end of the rubber pressure hose. These ferrules are common leak points. If there is seepage from these ferrules, the pressure hose should be replaced.
  • Hose damage. If the hose has significant physical damage, such as cuts, abrasions, cracks, or heat damage, the hose should be replaced to avoid sudden hose failure.
  • Contaminated fluid. If rubber particles are found in the power steering fluid or reservoir, it means the interior of either the pressure hose or the return hose is deteriorating. All rubber hoses should be replaced and the system flushed. An in-line, aftermarket fluid filter might be required.
  • Hose age. Both the pressure and return hoses are rubber-based products with a limited service life. If the vehicle is more than 10 years old, and power steering components are being replaced, all the rubber hoses should be replaced during that service.

How do mechanics replace the power steering pressure hose?

The underhood routing of the power steering pressure hose varies greatly between car models. The repair procedure ranges from simple to quite involved. The basic steps are:

  • Raise car as needed and support with steel safety stands.
  • Unthread the pressure hose tube nuts, or banjo-style bolts, at each end of the pressure hose.
  • Remove pressure hose and inspect interior hose lining for separation, if visible.
  • Install a new hose, using a new sealing washer or O-ring seals as applicable, and paying particular attention to the required original equipment manufacturer’s (OEM) torque value for the tube nuts or banjo bolts. Replace rubber return hose, if required, and with the authorization of the customer.
  • Once the system is fully sealed again, bleed or flush power steering system as required to remove all air and contaminants.
  • Finally, the engine is run, the car is test driven, and leaks are checked for at all connections.

Is it safe to drive with a power steering pressure hose problem?

No. The fluid in the power steering pressure hose is under very high pressure and flammable. A leak that sprays fluid into a hot engine part, such as the exhaust manifold, can cause a fire. Leaks that cause significant fluid loss can cause difficulty in steering and, if a leak causes the fluid level in the reservoir to drop too low, it can cause damage to the power steering pump too, necessitating the installation of not only a new hose but a new pump.

When replacing the power steering pressure hose keep in mind:

  • When the power steering hoses are replaced, the entire power steering system should be inspected.
  • Use only OEM specified power steering fluid in your power steering system.
  • If the pressure hose has deteriorated from the inside, the rubber return hose should be replaced as well and the system should be flushed. A mechanic might recommend the installation of an in-line filter to capture all debris.
  • Tube nuts and banjo bolts used to seal pressure hoses have OEM-specified torque values. Mechanics will use a calibrated torque wrench to tighten the connections.
  • Complete removal of air from the system can occasionally take some time, even after the normal bleeding procedure. During this time some mild noise may be heard when turning the steering wheel. If it persists more than a day or so, the system should be rechecked.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Oldsmobile mechanics

Real customer reviews from Oldsmobile owners like you.

Excellent Rating

(34)

Rating Summary
33
0
0
0
1
33
0
0
0
1

Kenny

29 years of experience
91 reviews
Kenny
29 years of experience
Oldsmobile 98 V6-3.8L - Oil Change - San Jose, California
Kenny was very informative and down to business. Diagnosed my problem, quickly ordered the parts,scheduled a time to come back, and provided the cost all in a few taps of his phone. I thought it was great having him roll up to my driveway and fix my car while I was in the comfort of my home. By the time i got inside I had an email with the invoice and new appointment.

Terry

31 years of experience
223 reviews
Terry
31 years of experience
Oldsmobile 98 V6-3.8L - Intake Manifold Gaskets - Tempe, Arizona
Terry was the best mechanic I've had. Instead of just fixing the problem and leaving he spent the extra time yo fix additional problems so the car would be in top shape.

Terry

27 years of experience
326 reviews
Terry
27 years of experience
Oldsmobile 98 V6-3.8L - Adjust Drum Brakes - Tempe, Arizona
Terry was great. He got the job done real quick and it made me feel confident in his ability to fix my problem. The brakes had me worried on the road, but now that Terry worked on it, I feel completely safe driving. I'll look into having him work more on my vehicle.

Manuel

10 years of experience
56 reviews
Manuel
10 years of experience
Oldsmobile 98 V8-7.5L - Brake fluid is leaking - Thomasville, North Carolina
Excellent and very detailed...Will use again and again!

Excellent Rating

(34)

Rating Summary
33
0
0
0
1
33
0
0
0
1
Number of Oldsmobile 98 services completed
374+
services done by our mechanics
TOTAL NUMBER OF EXPERT Oldsmobile MECHANICS
300+
experts on our platform

Recent articles & questions

P2050 OBD-II Trouble Code: Reductant Injector Circuit/Open Bank 2 Unit 1
P2050 P2050 code definition The P2050 OBD-II fault code indicates the Powertrain Control Module (PCM) has detected an issue in the reductant injector air pressure sensor circuit. The reductant injector is a component which reduces toxic emissions from the catalytic...
How to Prepare for the Connecticut Driver’s Written Test
Before Before you can get out on the road, and long before you can get your driver’s license, you need to take and pass your written driver’s exam in Connecticut. For some people, the idea of a written exam is...
Top 5 Ways to Make Your Car Wipers Last Longer
Car windshield wipers wear out eventually. Lift your wiper blades when it snows and clean the blades to increase the lifespan of your wiper blades.

Instrument cluster dead.

Hi, thanks for writing in. I'd be happy to help. BMWs are notorious for odd electrical issues being caused even by something as simple as a weak battery. I recommend to start tackling this issue by having the battery tested...

Maintenance light keeps coming on

I'm assuming you're talking about the maintenance required light. If the light keeps coming back on, it means that it is not getting properly reset at the time of service. The reset procedure varies, depending on whether your vehicle is...

Cant get timing belt over tensioner

During removal of the old belt, a special tool is used to position the tensioner in the fully retracted position, which makes it easy to slide the new belt over. On removal the instructions are to loosen the belt tensioner...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com