Nissan Stanza Intake Manifold Gaskets Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(4)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(4)

Intake Manifold Gaskets Replacement Service

How much does a Intake Manifold Gaskets Replacement cost?

On average, the cost for a Nissan Stanza Intake Manifold Gaskets Replacement is $475 with $69 for parts and $406 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1991 Nissan StanzaL4-2.4LService typeIntake Manifold Gaskets ReplacementEstimate$996.24Shop/Dealer Price$1062.52 - $1219.24
1990 Nissan StanzaL4-2.4LService typeIntake Manifold Gaskets ReplacementEstimate$949.39Shop/Dealer Price$1006.48 - $1156.31
1992 Nissan StanzaL4-2.4LService typeIntake Manifold Gaskets ReplacementEstimate$949.39Shop/Dealer Price$1006.62 - $1156.55
Show example Nissan Stanza Intake Manifold Gaskets Replacement prices

What is an intake manifold gasket and how does it work?

The intake on an engine may be made up of a lower intake manifold and an upper intake manifold or plenum. The lower intake manifold is a cast aluminum or molded plastic chamber bolted to the cylinder head of the engine. The intake manifold must be tightly sealed to the cylinder head(s) using a gasket in order to prevent air, oil, or engine coolant leaks.

When to consider replacing the intake manifold gasket:

Internal or external leaks. Due to constant temperature expansion and contraction of engine parts or overheating, the gasket’s ability to seal properly can be ruined, resulting in problems such as:

  • Internal or external engine coolant leaks. In some applications, the manifold has cooling passages within. If the manifold seal to the engine fails, coolant can leak externally or even into the engine oil crankcase, where coolant can be noticed in the engine oil.
  • Engine overheating. If the leak at the manifold is a leak of engine coolant, it can lead to engine overheating. However, there are other causes of engine overheating, so a mechanic would have to determine the actual cause.
  • External oil leaks. On some 6 and 8 cylinder engines, the intake manifold sits atop an oil-lubricated area of the engine block. If the manifold gasket has failed, oil can leak from the block to the exterior of the engine.
  • Poor engine operation, lean operation, rough idle. Vacuum air leaks into the manifold due to a defective gasket that will upset the air-fuel ratio. The engine may run poorly.
  • Check engine light. Minor leaks at the intake manifold gasket will not usually cause the check engine light to illuminate. However, as a leak persists, it may grow larger and it possible for the leak to degrade engine performance enough that it will cause a trouble code to set, which will cause the check engine light to illuminate.

How do mechanics replace the intake manifold gasket?

  • Working on a cold engine, the engine cover is removed. If the intake manifold has internal cooling system passageways, the engine coolant is drained below the level of those passageways.
  • The accelerator cable assembly and cruise control cable are removed and set aside. All electrical connections and emission and vacuum lines in the way of the intake are removed. Ignition components, such as the coil, are removed as needed. If the car has an upper plenum, that is removed and set aside.
  • If the fuel rail is bolted to the intake manifold, the supply and return connections to the fuel rail are disconnected.
  • Once all connections to the manifold are clear, the manifold is unbolted and removed from the engine.
  • Aluminum and plastic manifolds are checked with a machinist’s straightedge to ensure the surface flatness does not exceed the original equipment manufacturer’s specification. If the surface of a manifold is not flat, the new gasket will not seal properly. Plastic manifolds are checked for cracks, heat damage, and warpage.
  • Once the manifold is deemed re-usable or replaced as needed, the new gasket is applied, the manifold is put in position and the mounting bolts are torqued with a calibrated torque wrench in the OEM specified sequence. In some applications, RTV sealant must be applied in corners of the mounting surface or specified hard-to-seal spots, per the service manual.
  • All removed components are then re-installed in the reverse of the above steps.
  • Finally, the vehicle is run and checked for leaks, and test driven.

Is it safe to drive with an intake manifold gasket problem?

Yes. The principal concern with a leaking intake manifold gasket is potential damage to the engine, depending on where the leak is. Although the vehicle will generally be safe to drive, you should schedule service as soon as possible to minimize the chances of additional costly damage. If the leak involves coolant, it could lead to engine overheating damage or the coolant could contaminate the engine oil, which can damage the engine bearings. If there is an air leak to the cylinders, it can cause lean operation which could overheat the catalytic converter.

When replacing the intake manifold gasket keep in mind:

  • In engines where coolant flows through the intake manifold, a leaking intake manifold gasket can be either the cause of or result of engine overheating. If you have a leaking intake manifold gasket, and the engine has overheated, the entire engine should be inspected for damage, such as a blown head gasket. The engine cooling system thermostat should be replaced because engine overheating can damage the cooling system thermostat.
  • Some car engine designs are more likely than others to experience leaking intake manifold gaskets due to material and design issues. Your mechanic can inform you if your car represents one of these cases. Many times a re-designed gasket, or altered installation technique and torque values, will be relevant to avoid a recurrence of any leaks. Mechanics will consult Technical Service Bulletins to determine if any unique circumstance exists for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0

Kenneth

21 years of experience
870 reviews
Kenneth
21 years of experience
Nissan Stanza L4-2.4L - Distributor - Compton, California
Excellent vehicle troubleshooting skills.

Kenneth

21 years of experience
870 reviews
Kenneth
21 years of experience
Nissan Stanza L4-2.4L - Clean Throttle Body - Compton, California
Thanks to Kenneth R. Vinson's skillful ingenuity, my mother's vintage Nissan Axxess starts like new.

Matthew

34 years of experience
1438 reviews
Matthew
34 years of experience
Nissan Stanza L4-2.4L - Car is not starting - Norfolk, Virginia
Expert lvl knowledge. Easily helped in no time with something i was struggling with in a matter of minutes

Kenneth

21 years of experience
870 reviews
Kenneth
21 years of experience
Nissan Stanza L4-2.4L - Car is not starting - Compton, California
When determining why my mother's car would not start, Mr. Kenneth V. has prompt professionalism with a plethora of car knowledge and expertise, for thorough problem-solving skills.

Excellent Rating

(4)

Rating Summary
4
0
0
0
0
4
0
0
0
0
Number of Nissan Stanza services completed
44+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

P0760 OBD-II Trouble Code: Shift Solenoid C Malfunction
P0670 code means there has been an irregularity detected within shift solenoid C often due too hydraulic blockages or low transmission fluid.
What is the Difference Between Buying and Leasing a New Car?
In In today’s economy, it is important to make the best financial decisions possible. Choosing how to pay for a car is one of the toughest decisions you can make. Cars are tricky. Cars lose much of their value in...
The Traveler’s Guide to Driving in Puerto Rico
Puerto Puerto Rico is a beautiful place that has a lot to offer vacationers. Since it is a commonwealth of the United States, there is no need to have a passport to visit, which can make vacationing easier. All you...

Battery draining.

Either your battery is due for replacement (https://www.yourmechanic.com/services/battery-replacement) or you have a parasitic draw somewhere. A draw can be found by placing an ammeter in series with the negative battery cable. If excessive current draw is found, the cause of...

How to set correct timing of cam gear to cam alignment.

Hi there. You will need to get a cam alignment gear or something that will hold the camshafts together. Then align up the camshafts to the correct alignment with both dots facing the two slots on the top of the...

How much would a spark plug change be for a 4.6l 99 expedition? And should I change coils too?

Billing question was sent to CS for the cost to replace the spark plugs and the ignition coils on a 1999 Ford Expedition with a V8-4.6L engine.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (844) 997-3624 · hi@yourmechanic.com