Nissan Sentra Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(15)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(15)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Nissan Sentra Car Thermostat Replacement is $205 with $65 for parts and $140 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2001 Nissan SentraL4-1.8LService typeCar Thermostat ReplacementEstimate$337.24Shop/Dealer Price$386.40 - $525.78
2018 Nissan SentraL4-1.8LService typeCar Thermostat ReplacementEstimate$444.35Shop/Dealer Price$506.90 - $688.80
2012 Nissan SentraL4-2.5LService typeCar Thermostat ReplacementEstimate$326.51Shop/Dealer Price$373.50 - $510.28
1992 Nissan SentraL4-1.6LService typeCar Thermostat ReplacementEstimate$473.74Shop/Dealer Price$519.43 - $647.73
2009 Nissan SentraL4-2.5LService typeCar Thermostat ReplacementEstimate$326.51Shop/Dealer Price$374.97 - $512.86
2000 Nissan SentraL4-2.0LService typeCar Thermostat ReplacementEstimate$319.61Shop/Dealer Price$365.01 - $496.73
2018 Nissan SentraL4-1.6L TurboService typeCar Thermostat ReplacementEstimate$439.97Shop/Dealer Price$501.48 - $680.14
2003 Nissan SentraL4-1.8LService typeCar Thermostat ReplacementEstimate$328.23Shop/Dealer Price$375.65 - $513.72
Show example Nissan Sentra Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(15)

Rating Summary
13
2
0
0
0
13
2
0
0
0

Trung

5 years of experience
502 reviews
Trung
5 years of experience
Sentra 2002 - Thermostat - Fremont, CA
Trung arrived on time a quickly diagnosed and repaired the issue. He kept in constant communication with me throughout the entire service.

Johnathan

5 years of experience
41 reviews
Johnathan
5 years of experience
Sentra 2017 - Oil Change - Saint Louis, MO
Excellent service, arrived on time, and knowledgeable. Would book for future appointments.

Jermaine

10 years of experience
9 reviews
Jermaine
10 years of experience
Sentra 2015 - Brake Shoes (Rear) - Forest Park, GA
Jermaine was very knowledgeable and did an excellent job!

PETE

20 years of experience
26 reviews
PETE
20 years of experience
Sentra 2015 - Vacuum Booster - Newark, DE
Excellent job. Car ride like new. Would recommend definitely, only problem is I wish Pete serviced the Baltimore area lol.

Excellent Rating

(15)

Rating Summary
13
2
0
0
0
13
2
0
0
0
Number of Nissan Sentra Car Thermostat Replacement services completed
165+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

P2195 OBD-II Trouble Code: O2 Sensor Signal Stuck Lean Bank 1 Sensor 1
P2195 trouble code definition O2 Sensor Signal Stuck Lean Bank 1 Sensor 1 What the P2195 code means P2195 is an OBD-II...
Utah Parking Laws: Understanding the Basics
When When you are on the roads in Utah, you know how important it is to obey all the rules of the road. They are there for your safety and to ensure that traffic can flow unhindered. However, you need...
P0043 OBD-II Trouble Code: HO2S Heater Control Circuit Low (Bank 1 Sensor 3)
P0043 P0043 code definition P0043 stands for low circuit voltage for the heated oxygen sensor bank 1 sensor 3. This code can be seen with P0044 and P0042. What the P0043 code means The definition of P0043 is low voltage...

Oil light comes on at idle

Hello, the most likely cause of the Oil Light coming on at idle is due to a low oil pressure condition. When the vehicle has low oil pressure, it can lead to engine damage if the cause is not addressed...

Wiper problem

Hi there. Check the wiper motor relay and see if its engaging or not. If the relay is not clicking when you turn on the switch, then replace the relay. Even if the relay clicks, its possible that the relay...

I have a 1999 Chevy surburban the tires appear to be good but when I turn a hard left or right it seems to rattle and move slower

A shudder when turning all the way one direction or the other can be a result of low power steering fluid pressure. This can be caused by several different issues from a loose drive belt, to a bad pump, to...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com