Nissan Rogue Select Brake Drum Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(44)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(44)

Brake Drum Replacement Service

How much does a Brake Drum Replacement cost?

On average, the cost for a Nissan Rogue Select Brake Drum Replacement is $345 with $212 for parts and $133 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2015 Nissan Rogue SelectL4-2.5LService typeBrake Drum ReplacementEstimate$585.23Shop/Dealer Price$705.29 - $1033.97
2014 Nissan Rogue SelectL4-2.5LService typeBrake Drum ReplacementEstimate$557.23Shop/Dealer Price$677.31 - $1006.01
Show example Nissan Rogue Select Brake Drum Replacement prices

What are brake drums and how do they work?

A brake drum is a heavy, cast iron brake system part that looks like a shallow, several inches-high cylinder about 9 to 12 inches in diameter. The brake drum has a precisely machined surface all around the interior circumference, that the brake shoes make contact with when you apply the brakes, transmitting hydraulic pressure through the wheel cylinder. This forces the brake shoes outward against the interior of the brake drum, resulting in the friction that causes the car to slow. The brake drum is mounted over, and fully encloses, all of the rear brake components such as the wheel cylinder, springs and clips, brake shoes, and parking brake mechanism. The drum is commonly held to the wheel hub by the wheel and the lug nuts, but some configurations combine the drum with the wheel hub as one unit. Nowadays, a drum brake type system is only installed on the rear axle, if used at all, as 4 wheel disc type systems have become more common.

When to consider replacing brake drums:

  • Reduced braking effectiveness. If the brake drum is unevenly worn, scored or cracked, it will increase stopping distances. A cracked drum must be replaced outright but a worn drum can be restored on a brake lathe so long as enough metal material remains.
  • Pulsating brakes, pulling to one side, vibration or noise. If a brake drum is warped, is unevenly worn, or perhaps the brake shoes have worn down completely — creating metal-to-metal contact — you might detect pedal pulsation, the vehicle may pull to one side, or you might feel a vibration or hear a noise when you apply the brakes. The brake system will have to be inspected to pinpoint the exact problem.
  • Brake shoe replacement. Anytime the brake shoes are replaced, the drum must either be resurfaced or replaced outright. Installing new brake shoes on a used, unresurfaced drum will lead to poor results.
  • Loss of parking brake function. The parking brake locks the brake shoes against the brake drum. If the brake drum is cracked, the parking brake lever will pull up excessively and the car may still be able to roll. However, a more common circumstance is parking brake maladjustment or seizure of parking brake components. Repair of those problems will often require removal of the brake drum.

How do mechanics replace brake drums?

There are two options when it comes to brake drum service: outright replacement or resurfacing. In some cases, it is cheaper to replace the drum rather than refurbish it. In both cases though, the removal and installation procedure for the drum is the same.

  • Raise the vehicle and safely support it using steel jack stands.
  • Remove tire and wheel assembly.
  • Remove brake drum. Sometimes the brake drum has rusted to the wheel hub and removal of the drum will require a brake drum puller. In some cases, the wheel hub is integral to the brake drum, in which case the hub-bearing retaining bolt and the wheel bearing must be removed to replace the drum.
  • Measure the interior diameter of the machined surface in the drum with a brake drum micrometer or similar measuring tool. If sufficient metal exists to resurface the drum on a brake lathe, the mechanic will compare the cost of such restoration to the alternative: buying a new drum.
  • Prior to installing the resurfaced or new drum, the brake shoes, springs, wheel cylinder, parking brake mechanism, and backing plate are all inspected. All worn parts should be replaced. Generally, if drums have been replaced or resurfaced, new brake shoes should be installed. The worn shoes will cause irregular wear in the brake drum and reduce braking effectiveness.
  • The shoes are adjusted and the drum is installed. The wheel and tire assembly are installed and torqued in the proper sequence and the car is road tested to check the operation of the brakes.

Is it safe to drive with a brake drum problem?

No. Should there be a deficiency with the brake drums, stopping distances will not be as short as possible. In a panic stop, stopping just five or ten feet shorter could be the difference between no collision and a collision. Any deficiency in a vehicle’s braking system is a cause for concern and a potential safety issue. Have the brake drums inspected at your earliest convenience to determine if a problem exists and find out what must be done to fix it.

When replacing brake drums keep in mind:

  • With few exceptions, brake work on one end of an axle should be performed on both ends of the axle. Should a brake drum on one end of a front or rear axle be serviced, or brake shoes on one end are serviced, both sides of the axle should receive the same service. This helps to avoid problems, such as pulling, vibration, and so forth, once the vehicle is returned for use.
  • Brake drum systems use very powerful springs to keep the brake shoes in position. These springs are exposed to extreme heat. It is best practice to replace all springs whenever new shoes are installed. Should a spring unexpectedly break in the brake drum assembly, a mispositioned brake shoe could cause the brakes to grab and lock, which would pose a safety issue.
  • If the wheel hub and bearing are integral to the brake drum on your car, the mechanic may recommend replacement of the grease in the wheel bearings and inspection of the wheel bearings.
  • Since the arc of the brake shoes will not perfectly match with the arc of the drum when new, expect a bed-in period before maximum braking efficiency is achieved.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(44)

Rating Summary
44
0
0
0
0
44
0
0
0
0

Alex

16 years of experience
435 reviews
Alex
16 years of experience
Nissan Rogue Select L4-2.5L - Battery - Dallas, Texas
Worked fast and did a great job!

Attila

19 years of experience
906 reviews
Attila
19 years of experience
Nissan Rogue Select L4-2.5L - Car is not starting - Millburn, New Jersey
Attila did a great job. He showed me things using language i could understand. Great service and very sweet fellow. Very happy with service.

Shawn

23 years of experience
158 reviews
Shawn
23 years of experience
Nissan Rogue Select L4-2.5L - Brake Pads Replacement (Front, Rear) - Newport News, Virginia
Quick & punctual! 10/10 would recommend!

Frank

8 years of experience
130 reviews
Frank
8 years of experience
Nissan Rogue Select L4-2.5L - Door Lock Actuator Replacement (Driver Side Front) - Broadview, Illinois
The door actuator malfunctioned on my 2015 Nissan Rogue Select. I was skeptical to book through Your Mechanic simply because I'd never heard of this company. The initial mechanic had to cancel the appointment, so the next mechanic available was Frank Walker. Frank showed up at my house on time (for a very early morning appointment) and was extremely professional. He immediately began inspecting the car and got down to business. When I asked questions about the door actuator, he shared the information in a way that was understandable for someone who knows very little about the mechanics of a car. I found his services to be very knowledgeable and definitely efficient. I am in need of additional work on my vehicle and will without a doubt utilize Your Mechanic for this service!

Excellent Rating

(44)

Rating Summary
44
0
0
0
0
44
0
0
0
0
Number of Nissan Rogue Select services completed
484+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

How to Buy a Good Quality Fuel Pump
Fuel Fuel is pumped from the gas tank up into the engine, and these handy little devices come in any number of shapes, sizes, and applications imaginable. Each of the three different key types of fuel pumps has a specific...
How Do I Check My Tire Pressure?
Checking Checking air pressure on your tires is part of basic car maintenance. Check your tires once a week and before any long trips. You may use a tire pressure gauge to measure accurately, or just look closely to see...
How to Prepare for the Wisconsin Driver’s Written Test
If If you are looking forward to getting your license in Wisconsin, you first need to take your written driver’s exam so you can get your learner’s permit and then take the road test. The written exam, as long as...

Fixing seat belts that don't retract well

Those things are just ratcheting devices. When you pull them up, there is no ratchet inside and it goes "click, click, click." Then, when you slam on the brakes, they've got a little swing with a little pendulum. When they...

Air idle control valve bad? Loss of power and sluggish

You should have a second opinion on the part that needs replaced. The engine has a throttle body that is electronic and controls power. There are other sensors involved that can control the loss of power. You should have the...

EDC MALFUNCTION

Hi there. The EDC is referred to as the Electronic Damper Control (http://www.bmw.com/com/en/insights/technology/technology_guide/articles/electronic_damper_control.html). The (EDC) automatically or manually adjusts each damper to suit the driving conditions meaning you enjoy outstanding comfort along with the best in BMW on-road safety. EDC...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com