Nissan Rogue Select Windows Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(44)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(44)

Windows Inspection Service

How much does a Windows Inspection cost?

On average, the cost for a Nissan Rogue Select Windows Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2014 Nissan Rogue SelectL4-2.5LService typeWindows InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
2015 Nissan Rogue SelectL4-2.5LService typeWindows InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
Show example Nissan Rogue Select Windows Inspection prices

The windows on a car keep the interior safe, warm and dry. They allow fresh air in and make it easy to order at a drive thru window. If a window gets stuck up or down it can create a very unpleasant situation for the driver and passengers.

There can be a number of different problems with vehicle windows. The issue can vary from a blown fuse to a window switch that is not working. In some cases the glass can actually fall into the door.

Regardless of the problem, it should be fixed quickly, a malfunctioning window is not only inconvenient, it can also be dangerous.

How this system works:

Power Windows

The glass sits in a part called a regulator, which is pushed up and down by a small electric motor. The motor is attached to a worm gear and a number of spur gears, which creates a gear reduction, producing enough torque to lift the window while also keeping it level. When the window button is pushed the door module closes a relay, which then provides power to the window motor. The majority of problems with a power window are caused by the electrical system but faulty gears can also be the culprit.

Manual Windows

The glass is attached to a regulator, which is the component that pushes the window up and down. The handle sticks through the door panel and when the handle is cranked it moves the regulator up or down. Manual windows are rapidly being replaced by power windows.

Common reasons for this to happen:

  • Blown Fuse: If none of the power windows are functioning there is a good chance that the problem is a blown fuse or a bad relay. While these are two separate issues, the symptoms are often very similar. A complete inspection of the fuses and electrical system will be necessary to determine where the problem is and how to repair it.

  • Burned Out Motor: if the windows are not going up or down and there is no noise coming from the door when the switch is pressed there is a good chance the electric motor is burned out or malfunctioning. The motor will have to be replaced.

  • Power Window Regulator: If the motor is running when the switch is pressed but the window does not move, the regulator is likely damaged or malfunctioning. There are a number of parts that can break on a regulator. In this situation the regulator will have to be repaired or replaced.

  • Malfunctioning Motor: If the window is still moving up and down but very slowly, the electric motor may be malfunctioning. If it is making a whining sound this can also indicate a problem. As the motor ages it will wear out and eventually it will have to be replaced.

  • Broken Window Tracks: There are window track guides, which hold the window in place as it goes up and down. If the track guides are damaged it can cause problems with the window going up and down. Common symptoms include a slow moving window, and a rattling or grinding noise. Eventually, the window may fall inside the door.

  • Worn Window Switch: The power window switch gets used a lot and eventually it can wear out which will prevent power from going to the window. If this happens the window can end up stuck in the up or down position.

  • Bad Wiring: Wiring is integral to the operation of the power windows and if there is a short, a faulty switch or a malfunctioning relay it can bring the whole system to a halt. A professional should deal with wiring issues.

  • Broken Regulator Manual Window: If the window is starting to tilt sideways, the most likely cause is a broken regulator. The wheels on the end of a regulator will often break off which will cause the glass to tilt sideways, and eventually fall into the door.

What to expect:

A top-­rated mobile mechanic will come to your home or office to determine the source and cause of the window issue, and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How important is this service?

A malfunctioning window is certainly not a life threatening situation but it can lead to interior damage and unsafe situations if the window is stuck in the down position. The flip side of that coin is a window stuck in the up position which can make it impossible to order at a drive-thru or use the window as an escape exit in the event of an emergency.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(44)

Rating Summary
44
0
0
0
0
44
0
0
0
0

Ben

41 years of experience
1421 reviews
Ben
41 years of experience
Nissan Rogue Select L4-2.5L - Axle / CV Shaft Assembly Replacement (Passenger Side Front) - Houston, Texas
Execellent service. Fast service. I highly recommend his attention to detail and knowledge. Thanks Ben.

Mark

8 years of experience
38 reviews
Mark
8 years of experience
Nissan Rogue Select L4-2.5L - Smoke from engine or exhaust - Orlando, Florida
Mark was punctual, excellent and very knowledgeable.

Matthew

11 years of experience
136 reviews
Matthew
11 years of experience
Nissan Rogue Select L4-2.5L - Brake Rotor/Disc Replacement (Front) - Las Vegas, Nevada
He was fast and took a complete look at my vehicle to make sure everything was good.

Kenneth

20 years of experience
781 reviews
Kenneth
20 years of experience
Nissan Rogue Select L4-2.5L - Engine hesitates during acceleration - Carson, California
Great mechanic, and arrived early!

Excellent Rating

(44)

Rating Summary
44
0
0
0
0
44
0
0
0
0
Number of Nissan Rogue Select services completed
484+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

How Long Does a Brake Light Bulb Last?
Having Having properly working lights on your car is important when driving on busy roadways. Making sure that the other motorists see you and what you are doing can help to eliminate the risk of an accident. Most of the...
How to Buy a Used Commercial Truck
A commercial truck can be a wonderful addition to many business, both new and growing. Whether you need products delivered, or heavy equipment moved, a commercial truck can be beneficial to your business. Often, a relatively small business may prefer...
How to Become a Certified Mobile Vehicle Inspector (State Car Inspector Certified) in Maryland
Automotive technician jobs include mobile vehicle inspectors. Learn how to do car checks in Maryland through state-approved technical colleges.

How do you program a personal security code for the Securicode® system?

If your car is equipped with the Securicode® system (not all Fusions have this), you have the ability to program up to three custom personal security codes. These codes can then be used to lock or unlock the doors, as...

What means error fault code p1978

The trouble code (https://www.yourmechanic.com/article/how-to-read-and-understand-check-engine-light-codes-by-jason-unrau) you listed is a manufacturer specific code, designated by the P1xxx. I have searched my files and cant find that DTC trouble code. Can you please verify that the code is P1978? However, if you'd like...

I was driving in the cold for a few minutes and then my car stalled and then i turned it back on and it was fine and then it stalled again and then it was fine and we parked it and now it seems fine but my check [engine](/topics-engine-gmc/) light is on now

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com