Nissan Pickup Reduced Power light is on Inspection at your home or office.

Our certified mobile mechanics come to you 7 days a week between 7 AM and 9 PM.

Estimate price near me

Service Location

Customer Ratings

(34)

How A Diagnostic Works

Instantly book a certified mobile mechanic to come to you

Mechanic diagnoses the problem and quotes necessary repairs

Your vehicle is ready to go

Fair, upfront & transparent pricing for all services

Our certified mobile mechanics can come to you now.

Customer Ratings

(34)

Reduced Power light is on Inspection Service

How much does a Reduced Power light is on Inspection cost?

On average, the cost for a Nissan Pickup Reduced Power light is on Inspection is $95 with $0 for parts and $95 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
1997 Nissan PickupL4-2.4LService typeReduced Power light is on InspectionEstimate$114.99Shop/Dealer Price$124.99 - $132.49
1995 Nissan PickupV6-3.0LService typeReduced Power light is on InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1995 Nissan PickupL4-2.4LService typeReduced Power light is on InspectionEstimate$94.99Shop/Dealer Price$105.01 - $112.52
1996 Nissan PickupL4-2.4LService typeReduced Power light is on InspectionEstimate$94.99Shop/Dealer Price$104.99 - $112.48
Show example Nissan Pickup Reduced Power light is on Inspection prices

A Reduced Power light usually indicates a fairly serious problem with the throttle system. When this light illuminates the vehicle will often go into a “safe mode”, which will severely limit the speed of the car and in some cases will render the vehicle un-drivable.

Since the Reduced Power light can trigger for a number of different reasons, tracking down the exact cause is extremely important, if the vehicle is not properly diagnosed and repaired, the Reduced Power light will trigger again, putting the vehicle in safe mode.

How this system works:

When the vehicle’s computer detects a fault in the engine that affects its drivability, performance, transmission or emission system it will trigger the reduced power light. It will also trigger if there is an issue with the electronic throttle, the accelerator pedal or the throttle module.

When a vehicle goes into reduced power mode it will seriously impact its performance. Some vehicle will be restricted to idle speed while others restrict speed to 20-30 miles per hour. The Reduced Power trigger will save Diagnostic Trouble Codes (DTCs), which will indicate where the fault occurred. In most cases, a Restricted Power light is related to a throttle body or the connector.

Common reasons for this to happen:

  • Faulty Throttle Body: A throttle body is part of the of the air intake system which helps control the amount of air going into the engine. If a throttle body is failing the engine will not get the correct mixture of air and fuel. This can trigger the Reduced Power light as well as lead to a poor running engine. It can also trigger the Check Engine light.

  • Failing Throttle Position Sensor: The throttle position sensor tells the vehicle computer the position of the gas pedal. The computer uses this information to calculate the proper amount of air and fuel to send to the engine. The throttle position sensor also controls shifting the gears of a vehicle, which means that a faulty throttle position sensor will prevent a car from changing gears. If this part is failing, the Reduced Power light will trigger.

  • Faulty Engine Control Unit: The engine control unit is an essential component of a vehicles computer. It regulates and controls many systems, including the drive train and parts of the engine. If a fault is detected in this crucial part, it can trigger the Reduced Power light as well as the Check Engine light. This is a major issue that should be investigated as soon as possible.

  • Faulty Wiring: Exposed or damaged wires can cause issues with the any of these components and will possibly trigger the Reduced Power light. A loose wiring crimp can also be the culprit. Wiring issues can be tricky to track down so using a professional mechanic is a necessity.

  • Malfunctioning Oxygen Sensors: Oxygen sensors are responsible for measuring how rich or lean exhaust gases are leaving a vehicles combustion chamber. The vehicle’s computer uses this information to constantly adjust the amount of fuel going into the engine. A failing or dirty sensor can put too much or too little fuel into the engine. While a failing oxygen sensor will usually trigger a Check Engine light it is possible that the Reduced Power light could also trigger.

What to expect:

A top-rated mobile mechanic will come to your home or office to determine the source and cause of the Reduced Power light issue, ​and will then provide a detailed inspection report that includes the scope and cost of the necessary repairs.

How it's done:

The mechanic will inspect your vehicle's air intake system, electrical wiring and sensors, including the throttle body and oxygen sensors, along with other important components. It may be necessary for the mechanic to test drive the car to verify the complaint and provide an accurate diagnosis.

How important is this service?

The Reduced Power light only illuminates if there is a serious issue with the vehicle that must be addressed immediately. In almost all cases, the throttle or the vehicles computer will be malfunctioning which can make driving the vehicle dangerous. While it varies by manufacturer, most vehicles that go into “safe mode” will stay there until the error codes are read by a code scanner.

If the vehicle Reduced Power light illuminates the vehicle should immediately be inspected, diagnosed and repaired.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(34)

Rating Summary
32
0
0
0
2
32
0
0
0
2

Chris

11 years of experience
281 reviews
Chris
11 years of experience
Nissan Pickup V6-3.0L - Brake Light Switch - Scottsdale, Arizona
Quick evaluation and handled the problem. Great job

Joel

21 years of experience
987 reviews
Joel
21 years of experience
Nissan Pickup V6-3.0L - Car is not starting - Jacksonville, Florida
Joel is always on time , I sit and watch him work and he explains everything as he goes , making me more knowledgeable about my truck . Easy to talk to doesn't give one worded answers like my previous mechanic. Overall Joel Is the Man !!!! , Im only requesting him to work on my baby.

Rick

21 years of experience
44 reviews
Rick
21 years of experience
Nissan Pickup L4-2.4L - Clutch Fluid - Stockton, California
He was friendly and informative. Would definitely request him again.

Robert

37 years of experience
237 reviews
Robert
37 years of experience
Nissan Pickup L4-2.4L - Car is not starting - Acworth, Georgia

Excellent Rating

(34)

Rating Summary
32
0
0
0
2
32
0
0
0
2
Number of Nissan Pickup services completed
374+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

3 Essential Things to Know About your Car’s GPS
Thanks Thanks to technology, navigation has become quite a bit easier. Instead of relying on maps and directions from friendly gas station attendants, most people are using GPS, global positioning satellite systems, to help them find their way around the...
How to Get a Connecticut Driver's Permit
In In the state of Connecticut, all drivers under the age of 18 are required to obtain a learner’s permit before they can begin driving legally. In order to obtain a driver’s permit, there are certain steps that must be...
P2041 OBD-II Trouble Code: Reductant Injector Air Press Sensor Circuit Intermittent
P2041 means there is a malfunction in the reductant injector air pressure sensor circuit. This could be due to damaged electrical components.

Fuel range indicator says I can drive 180 miles until empty. I drive half a mile and the indicator already says 165 miles left. What's wrong?

This calculation your car performs is a constantly varying calculation due to a couple of things. One part of this calculation is based upon the driving habits of the driver and how the throttle is used in combination with how...

My key won't turn in my 2010 Volkswagen jetta

Hi there. This article might help you (https://www.yourmechanic.com/article/how-to-diagnose-an-ignition-key-that-won-t-turn) complete a few self-diagnosis checks you can complete to help your key become unlocked. I would suggest reading the article and completing each step before contacting a professional mechanic to complete a...

Hey Larry it's Carl from last night. Just got back on this and did a bunch of diagnostics z(had to work this morning) FYI its the P420 code on a 2010 Equinox 3.4l 4-cyl 1. Bank 1 sensor varied from .2v to.9 v at idle & 2000rpm (fuel trim varied from -3%-8%to16% 2. Bank 2 sensor remained consistent .69v to.75v at idle and 2000rpm 3. Backpressure at up & Down stream O2 sensors are at 1.25-1.5psi 4. Found small leak at muffler exit/tail pipe of the vehicle (see attached) It’s in the muffler seam at the hanger weld (cant believe that would throw the code)

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com