Nissan NV2500 Control Arm Assembly Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Control Arm Assembly Replacement Service

How much does a Control Arm Assembly Replacement cost?

On average, the cost for a Nissan NV2500 Control Arm Assembly Replacement is $508 with $394 for parts and $114 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2012 Nissan NV2500V8-5.6LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$1470.61Shop/Dealer Price$1789.53 - $2687.76
2015 Nissan NV2500V6-4.0LService typeControl Arm Assembly - Rear Upper Right ReplacementEstimate$1035.79Shop/Dealer Price$1259.05 - $1870.20
2017 Nissan NV2500V6-4.0LService typeControl Arm Assembly - Front Upper Left ReplacementEstimate$902.81Shop/Dealer Price$1112.03 - $1712.66
2013 Nissan NV2500V6-4.0LService typeControl Arm Assembly - Front Lower Right ReplacementEstimate$1418.61Shop/Dealer Price$1737.51 - $2635.73
2018 Nissan NV2500V6-4.0LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$1308.99Shop/Dealer Price$1619.78 - $2525.06
2012 Nissan NV2500V8-5.6LService typeControl Arm Assembly - Rear Upper Left ReplacementEstimate$1035.79Shop/Dealer Price$1259.04 - $1870.19
2015 Nissan NV2500V6-4.0LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$1454.97Shop/Dealer Price$1779.42 - $2694.94
2012 Nissan NV2500V8-5.6LService typeControl Arm Assembly - Front Lower Left ReplacementEstimate$1454.97Shop/Dealer Price$1780.39 - $2696.63
Show example Nissan NV2500 Control Arm Assembly Replacement prices

What is a control arm and how does it work?

A control arm is a suspension component, usually made of heavy gauge steel or aluminum, that links the steering knuckle in the front — or axle carrier in the rear — to the frame of the vehicle. Many vehicles have upper and lower control arms. The inboard link(s) of the arm securely bolt to the frame of the vehicle through rubber bushings, while the outboard link of the control arm connects to the steering knuckle through a ball joint; all of which allow the control of the up and down movement of the steering knuckle or axle carrier. This minimizes the transmission of shock and vibration to the vehicle’s body.

When to consider replacing a control arm:

The structural portion of the control arm can last the life of the vehicle — except for cases of corrosion or crash damage. However, the rubber bushings and the ball joint in a control arm have a limited life. A mechanic should investigate if you notice:

  • Wheel alignment difficulties. Should the bushings, or the ball joint, in a control arm be worn, it will be impossible to properly align the vehicle. The worn components, or the entire arm, must be replaced.
  • Vehicle won’t track straight or pulls to one side. A car will not track straight and may require constant steering correction if there is a worn, bent, or loose control arm.
  • Clunking or squeaking noise. A loose control arm, or a control arm with dried out, rotted, or loose bushings, may move enough to cause detectable noise from the suspension as you go over bumps in the road.
  • Vehicle pulls to one side only when braking. Worn bushings or ball joints can allow control arm to shift when braking, causing the vehicle to pull to one side. Although, this could also be caused by brake calipers.

How do mechanics replace a control arm?

  • The vehicle is raised and supported on steel jack stands, and the wheel and tire assembly is removed.
  • Stabilizer bar links are detached from the control arm, if applicable. ABS wiring to the wheel speed sensor, if routed along the arm, is disconnected.
  • Control arm mounting bolts are detached from the frame and from the axle carrier if the control arm is in the rear.
  • For front control arms connected to the steering knuckle via a ball joint, the nut is removed from the ball joint stud and the stud is pushed through the steering knuckle to free the arm.
  • The arm is lowered from the vehicle and examined by the mechanic to confirm that the noise, or other problem, actually originated from a defect in the arm.
  • The new arm is installed using new mounting bolts if required by the service manual. In many cases, the fasteners must be tightened with the vehicle weight on the suspension in order to ensure the bushings are in a neutral, or resting, position.
  • The vehicle is lowered and road tested to confirm the problem is resolved. Replacing a control arm will change the vehicle alignment settings and the mechanic will refer you to a professional alignment shop to have the vehicle alignment set to factory specifications.

Is it safe to drive with a control arm problem?

No. If the car wanders on the road, pulls to one side, or noise from the suspension is loud, you need to schedule repair right away. Should the problem be limited to low levels of noise, such as clunking or squeaking, continued use of the car is reasonable until you can schedule a repair. Should the control arms be damaged as a result of a collision, it would be unsafe to drive the car until it is repaired.

When replacing a control arm keep in mind:

  • The number of control arm types vary from vehicle to vehicle depending on the design of the vehicle suspension.
  • Control arms should be replaced in pairs — arms on both sides of a front or rear axle — if the reason for replacement is worn control arm bushings or a worn ball joint.
  • All other suspension components should be inspected when control arms are replaced because looseness, damage, or excessive wear in other parts of the suspension system will make it impossible to perform a wheel alignment after the control arms are replaced.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Carlos

28 years of experience
501 reviews
Carlos
28 years of experience
Nissan NV2500 V8-5.6L - Pre-purchase Car Inspection - Fontana, California
Super helpful and detailed. Explained everything to me over the phone and was super communicative about timing.

Stanley

23 years of experience
27 reviews
Stanley
23 years of experience
Nissan NV2500 V6-4.0L - Brake Pads Replacement (Front) - Long Beach, California
HE WAS GREAT!! HE WAS VERY HONEST AND GOOD AT WHAT HE DOES. A MECHANIC LIKE STANLEY IS HARD TO FIND.

Dameron

17 years of experience
171 reviews
Dameron
17 years of experience
Nissan NV2500 V6-4.0L - Brake Rotor/Disc Replacement (Rear) - Indianapolis, Indiana
On time very knowledgeable will definitely use him again

Michael

15 years of experience
48 reviews
Michael
15 years of experience
Nissan NV2500 V8-5.6L - Brake Rotor/Disc Replacement (Front) - Jacksonville, Florida
Great experience!

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Nissan NV2500 services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

How To Use Hazard Lights
Your Your car is equipped with a number of different lights. Depending on the light in question, they serve purposes ranging from visibility to directionality to safety to convenience. Where do your hazard lights fit into that? Actually, it’s a...
How Long Does a Key Fob Battery Last?
In order to get into a modern car, you will usually have to have the key fob that comes...
P0801 OBD-II Trouble Code: Reverse Inhibit Control Circuit Malfunction
P0801 means an issue with the reverse inhibitor switch making the vehicle unable to be placed in reverse or capable of doing so while driving forward.

Can you buff or polish a car using a just buffer without having to wax it?

Using a buffer on a car's paint to get out scratches would require the use of a compound liquid to take off some of the paint surface. If you buff too much in one spot, then you will take off...

I have an very bad oil leak.

The crankshaft seal (https://www.yourmechanic.com/services/front-crankshaft-seal-replacement) is in the area you are referring to. The crankshaft seal lasts maybe 100,000 miles or so. There are other gaskets and seals in that area that would have to be examined as well. If you...

My car keeps shaking and vibrating when ever am at speed and when ever I apply my brake. What can cause that? 2008 Toyota Highlander

Claimed by David Gaines Wooten

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com