Nissan NV200 Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(8)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(8)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Nissan NV200 Car Thermostat Replacement is $228 with $95 for parts and $133 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2013 Nissan NV200L4-2.0LService typeCar Thermostat ReplacementEstimate$351.15Shop/Dealer Price$412.69 - $565.81
2014 Nissan NV200L4-2.0LService typeCar Thermostat ReplacementEstimate$328.95Shop/Dealer Price$391.96 - $549.45
2017 Nissan NV200L4-2.0LService typeCar Thermostat ReplacementEstimate$337.67Shop/Dealer Price$402.86 - $566.89
2016 Nissan NV200L4-2.0LService typeCar Thermostat ReplacementEstimate$328.95Shop/Dealer Price$391.93 - $549.39
2015 Nissan NV200L4-2.0LService typeCar Thermostat ReplacementEstimate$328.95Shop/Dealer Price$391.98 - $549.49
2018 Nissan NV200L4-2.0LService typeCar Thermostat ReplacementEstimate$337.67Shop/Dealer Price$402.86 - $566.89
Show example Nissan NV200 Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0

Bill

21 years of experience
23 reviews
Bill
21 years of experience
Nissan NV200 L4-2.0L - Brake Pads Replacement (Front, Rear) - Oceanside, California
super....... DANKE Joseph

John

36 years of experience
434 reviews
John
36 years of experience
Nissan NV200 L4-2.0L - Oil Change - Sacramento, California
John was awesome. Very fast and personable.

Adam

17 years of experience
230 reviews
Adam
17 years of experience
Nissan NV200 L4-2.0L - Oil Change - West Palm Beach, Florida
Very trust worthy, always on time & tells me what needs to be done or when they should be done. The best couldn`t ask for a better mechanic. Keep up the great work, Adam Thanks, again!!!

Theodore

16 years of experience
1587 reviews
Theodore
16 years of experience
Nissan NV200 L4-2.0L - Oil Change - Redmond, Washington
appreciated the thorough work

Excellent Rating

(8)

Rating Summary
8
0
0
0
0
8
0
0
0
0
Number of Nissan NV200 services completed
88+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1500+
experts on our platform

Recent articles & questions

How to Get Rid of Bad Smells in Your Car
No one likes riding in a smelly car. Locate the source of the smell, then give your car a thorough clean to keep it smelling fresh.
Symptoms of a Bad or Failing Drive Belt Tensioner
Common signs include grinding or squeaking noises coming from the belt, unusual belt wear, and belt-driven accessories like the alternator failing.
How to Keep a Child From Unlocking Seat Belts
Getting Getting kids into the car and buckled in can be a hassle in and of itself, and once the little ones figure out how to unbuckle their own seat belts (https://www.yourmechanic.com/article/3-essential-things-to-know-about-your-car-s-seat-belts) then there is one more thing to look...

Whenever i touch my car -Just a little touch the whole car shake as if it will turn upside down.

Hello. It sounds like you have weak springs or struts. It is heard of for those to weaken and produce the concerns you speaketh of. Springs, shocks, or struts are suggested to be replaced every 50,000 miles. I suggest having...

Where is the OK buttom to turn blind spot monitor on or off?

There is no "OK" button, rather you use the "select" button which appears as an arrow indicator that points to the right. The procedure to turn the BSM system on and off, and select the various options, is explained on...

I need to have replaced the rear hatch door actuator (liftgate) on my 2010 Toyota Highlander Limited. I have the OEM motor so it would only include labor. I live in Phoenix, area code 85044. What is the total cost of remove and replace.

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com