Nissan Kicks Car Thermostat Replacement at your home or office.

Our mobile mechanics offer services 7 days a week. Upfront and transparent pricing.

Estimate price near me

Service Location

Customer Ratings

(108)

Included for free with this service

Online Booking

Mechanic comes to you

12-month / 12k-mile warranty

Free 50 point safety inspection

Our certified mobile mechanics can come to your home or office 7 days a week between 7 AM and 9 PM.

Customer Ratings

(108)

Car Thermostat Replacement Service

How much does a Car Thermostat Replacement cost?

On average, the cost for a Nissan Kicks Car Thermostat Replacement is $300 with $104 for parts and $196 for labor. Prices may vary depending on your location.

CarServiceEstimateShop/Dealer Price
2018 Nissan KicksL4-1.6LService typeCar Thermostat ReplacementEstimate$425.90Shop/Dealer Price$483.17 - $643.62
* Nissan KicksL4-1.6LService typeCar Thermostat ReplacementEstimate$413.29Shop/Dealer Price$468.08 - $626.68
Show example Nissan Kicks Car Thermostat Replacement prices

What is an engine cooling system thermostat and how does it work?

The car's engine cooling system thermostat is a small valve within a cooling system passageway that opens and closes in response to the temperature of the circulating engine coolant. When your car is first started and the coolant is cold, the valve in the thermostat will be in the closed position, circulating the coolant flow only within the engine instead of flowing to the radiator, which allows the engine to warm up fast, promoting fuel efficiency, low emissions, and reduced engine deposits. Once the engine coolant reaches the design temperature, usually around 195 degrees, the valve will open and close as you drive in order to maintain a coolant temperature typically between 195 to 225 degrees Fahrenheit.

Thermostat

When to consider replacing the engine cooling system thermostat:

  • Engine overheats. A thermostat with the valve stuck closed is a common cause of engine overheating. However, since there are other causes of overheating, a mechanic will thoroughly inspect the cooling system prior to condemning the thermostat. Since it is usually not known how badly the engine overheated, the mechanic will also try to determine if there is evidence that the cylinder head gasket was blown. If so, it would be repaired prior to replacing the thermostat.
  • Temperature gauge reads too low or too high. Thermostats can get sticky, causing the engine temperature to stray from the optimal range. Your dash-mounted temperature gauge will notify you of this malfunction.
  • Cooling system repairs. All thermostats eventually fail. Therefore, if the cooling system is already open for major repairs, such as water pump or radiator replacement, it is recommended to install a new thermostat simply as insurance against future breakdown.

How do mechanics replace the engine cooling system thermostat?

  • Once the engine is completely cold, the radiator cap is loosened and enough coolant is drained from the radiator so the coolant level is below the thermostat housing.
  • The thermostat housing is removed and the thermostat and gasket are extracted. Note that some cars have more than one cooling system thermostat and both might need replacement.
  • All mounting surfaces on the thermostat housing are cleaned of old gasket material. A new gasket is applied and the thermostat is re-installed in the correct orientation and with the temperature sensing cylinder facing downward towards the engine.
  • The thermostat housing bolts are tightened to original equipment manufacturer (OEM) specifications using a calibrated inch-pound torque wrench.
  • The cooling system is refilled with the appropriate coolant type and the system is fully bled of all air.
  • The car engine is run until the normal operating temperature is reached, and while taking precautions with the hot coolant, the coolant level is rechecked while confirming there is flow through the radiator — either visually or with an infrared temperature gun. This will confirm the thermostat is open. Finally, the engine is checked for leaks.

Is it safe to drive with an engine cooling system thermostat problem?

No. If it has been determined that there is a thermostat problem, it should be repaired right away. Failure to do so can cause substantial and costly damage to the engine.

When replacing the engine cooling system thermostat keep in mind:

  • Engine overheating due to causes other than a faulty thermostat, will themselves damage a thermostat. Therefore, always replace the thermostat if the engine overheats, even if the thermostat was not the initial cause of the overheating.
  • The thermostat should be replaced anytime you have major work done on the coolant system. It is convenient and costs little during such repairs and insurance against future breakdown.
  • OEM thermostats are the best ones to use and you can request your mechanic to install only the OEM thermostat. Dealer supplied, OEM thermostats are sometimes more costly but are generally higher quality and specifically engineered for your car.

Fast and easy service at your home or office

Backed by 12-month, 12.000-mile guarantee


Meet some of our expert Nissan mechanics

Real customer reviews from Nissan owners like you.

Excellent Rating

(108)

Rating Summary
94
6
1
0
7
94
6
1
0
7

Benji

23 years of experience
309 reviews
Benji
23 years of experience
Nissan Kicks L4-1.6L - Car Battery Replacement - Mesa, Arizona
Fast and friendly service, thank you!

Duane

26 years of experience
589 reviews
Duane
26 years of experience
Nissan Kicks L4-1.6L - Oil Change - Escondido, California
job well

John

8 years of experience
89 reviews
John
8 years of experience
Nissan Kicks L4-1.6L - Check Engine Light is on - Valrico, Florida
Was very informative and kept me updated on everything he was doing

H

27 years of experience
828 reviews
H
27 years of experience
Nissan Sentra L4-1.8L - Thermostat - Milpitas, California
Honorio did the job very well!!!

Excellent Rating

(108)

Rating Summary
94
6
1
0
7
94
6
1
0
7
Number of Nissan Car Thermostat Replacement services completed
1188+
services done by our mechanics
TOTAL NUMBER OF EXPERT Nissan MECHANICS
1600+
experts on our platform

Recent articles & questions

Ignition Coil Replacement - Step-by-Step Guide
Find everything you need to know about replacing an ignition coil in this guide. Learn to do an ignition coil replacement yourself with YourMechanic.
P0533 OBD-II Trouble Code: A/C Refrigerant Pressure Sensor Circuit High Input
P0533 means the A/C refrigerant pressure is too high to safely function often due to inoperative cooling fans or too little or too much refrigerant.
What Is Tire Camber?
You’ve You’ve probably never considered how your wheel stays upright. There must be something in there that holds it in place, but you’ve never given it much thought. It just bolts in place, right? In fact, there are angles that...

Car difficult to start, wants to die

Usually when a car is misfiring and running rough, there are a few different things that could be the cause. If the vehicle doesn't have enough air when starting or driving, the vehicle will want to misfire or stumble, there...

Turn signals and hazards not working

The hazard switch is the most common failed component to cause the turn signals and hazards to not work. The hazard switch has the flasher in it, which may be your problem. I recommend that you have a mechanic, like...

Belt is siezed? car starts whining as I accelerate and it starts smelling like burnt rubber

If noise is suspected from the serpentine belt or belt driven accessories and/or pulleys, just disconnect the belt and momentarily run the engine. If the noise goes away, all components driven by the belt need to be closely examined. If...

How can we help?

Our service team is available 7 days a week, Monday - Friday from 6 AM to 5 PM PST, Saturday - Sunday 7 AM - 4 PM PST.

1 (855) 347-2779 · hi@yourmechanic.com